PVC, PP & Plastic Products #4785214

IP32IP provides excellent electrical insulation along with the lowest shrink temperature of any of our tubings. When high shrink temperatures can damage enclosed or adjacent components this tubing is the best choice. PVC tubing shrinks a full 50% quickly at 100C.

Approximately 15% longitudinal shrinkage allows ripple free conformance around sharp bends to form a tight fitting insulation for most general applications with a high degree of flexibility. Our Irradiated PVC Heat Shrink tubing resists most chemicals and oils as well as sunlight, moisture and fungus. IP32IP meet the requirements of AMS-DTL-230532 Class 1 with the exception of longitudinal shrinkage.

Improved solder iron cut-through and abrasion resistance with outstanding dielectric and mechanical protection.

Heat Shrinkable Kynar Tubing is an irradiated, thin-wall tubing offering a high degree of mechanical strength and high temperature resistance. Kynar tubings are fabricated from polyvinylidene fluoride which gives outstanding abrasion resistance and cut-through properties in combination with high dielectric strength. Kynar is inherently flame retardant and semi-rigid. It is highly resistant to most industrial fuels, chemicals and solvents.

Kynar tubings shrink at 350F on applications such as jacketing for components, fuse coverings and capacitor protection. Because the tubing is transparent, it offers see-thru inspection and identification.

Application of heat above 121C will shrink this tubing quickly to 50% of its supplied diameter or snug down on the object it is to cover.

Heat Shrinkable Kynar is excellent for strain relief applications. It can be flexed, twisted and bent repeatedly without loss of mechanical or electrical strength. Because of its thin wall, Kynar can be used in areas where space is limited.

IP53MP is a flexible, heat shrinkable tubing with superior electrical properties and was developed to meet the most stringent medical application requirements.

Made from medical grade polyolefin, it has excellent dielectric, chemical and physical properties

Application of heat above 121C will shrink this tubing quickly to 50% of its supplied diameter or snug down on the object it is to cover.

Resists a wide range of chemicals, such as hexachlorophene (pHisohex), saline solution, povidoneiodine (Betadine), benzalkonium (Zephiran), alcohol, as well as moisture and fungus.

Heat Shrinkable PVC Tubing has one of the lowest shrink temperatures of any electrical insulation tubing. This tubing is the best alternative for avoiding heat damage for enclosed or adjacent components. PVC tubing shrinks a full 50% quickly at 200F.

The approximate 20% of longitudinal shrinkage allows ripple free conformance around sharp bends to form a tight fitting insulation in most general applications while retaining a high degree of flexibility. PVC Heat Shrink Tubing resists most chemicals and oils as well as sunlight, moisture and fungus. IP30HS meets the requirements of AMS-DTL-230532 Class 2.

Heat Shrinkable PVC Tubing is also available in irradiated (IP32IP below) and 132 heavy wall.

Mylar Heat Shrink Tubing is a superior, high dielectric insulation material that provides a tight, smooth protective covering. It is extremely easy to use and is suitable for hand or machine application, with no special or costly shrinking equipment necessary. Mylar tubing may be shrunk by heat guns, electrical coil heaters or ovens. It is shrinkable by as much as 50% of its diameter in order to provide an immovable, tight fit. Temperature requirements are as low as 90C for shrinking purposes with a heat cycle as short as one second.

Mylar Heat Shrink is spiral wound to practically any diameter and length. It is an excellent choice for both high temperature and electrical insulation; for protection of coils and components; or as a replacement for tape

Physical property values are published by DuPont and are typical for 65 gauge Mylar polyester film. Further information on Mylar film is available from the DuPont Co. Our Engineering Dept. will be glad to work with you on individual requests.

IP55FL is a flame retardant, flexible tubing offering a high degree of mechanical strength and high temperature resistance. Fluoropolymer is made from polyvinylidene fluoride which gives outstanding abrasion resistance and cut-through properties. IP55FL is inherently flame-retardant and flexible. It is highly resistant to most industrial fuels, chemicals and solvents.

Fluoropolymer tubings shrink at 125C on applications such as jacketing for components, fuse coverings and capacitor protection. Because the tubing is transparent, it offers excellent see-thru inspection and identification.

Spiral Wrap Tubing is an expandable spirally cut tubing designed to hold wire bundles firmly yet allows complete flexibility. Individual wires can enter or exit at any point on a long harness where many leads may be required.

Spiral Wrap allows removal for changes or repair and is easily reinstalled. This material offers more versatility than tape and is quicker to use than lacing tape or cable ties.

It is available in a wide variety of materials and colors to satisfy high temperature (up to 26C), fire resistant (UL 94V-0 & 94V-2) and UV applications, plus color coding and identification.

PTFE Tubing is the most versatile insulating material, offering highly stable electrical properties at virtually all electronic frequencies throughout an operating range of -70C to 260C. PTFE tubing is nontoxic and will not burn in normal atmosphere at any temperature, and is inert to practically all lubricants, solvents, and reagents. Electrical performance is excellent, offering extremely high dielectric strength even in the thinnest cross sections, with hot soldering irons and sub-zero environmental conditions having no effect. PTFE Teflon tubing possesses the lowest coefficient of friction of any known solid. It is also resistant to wicking, moisture absorption, or contamination from objectionable sources.

PTFE tubing is the material to specify when the reliability and dependability of an application at environmental, electrical, mechanical, and chemical extremes is paramount.

14 thru 2 trade size
Use with straight or right angle connectors
Resists corrosion, oil & water
Maximum flexibility, can be used in extremely tight quarters
Resists abuse, pulling & crushing
Smooth inside for easier wire pulling
Light weight, lower installed cost
Outdoor, sunlight resistant
Quick installation, cuts with utility knife or PVC cutter
Integral rigid & flexible PVC construction
Suitable for use in high vibration or flexing applications