Post Buy Requirement
Intersomma, LLC
Pembroke Pines, FL, United States
Verified Add Review

Other Products / Services

Wood Handles

Our company specializes in exporting, importing & supplying of Wood Handles. We offer different types of Wood Handles such as Pine Wood Handles and Tauari Wood Handles. We offer high quality Wood Handles that are manufacture by a reputed company Malinski Madeiras Ltda. The Tauari Wood Handles are made of average density Tauari Wood that is firm and light in color. On the other hand, the Pine Wood Handles are manufactured using Pine Wood that makes the Pine Wood Handles solid, sturdy and stable. We supply Pine Wood Handles to the clients in different finishes and sizes at the most reasonable prices.

Minimum Order Quantity : One 20' container
View Complete Details

Wood Flooring

We are a chief Exporter, Importer & Supplier of Wood Flooring. Our range of Wood Flooring includes Solid Wood Flooring and Engineered Wood Flooring. We offer highly durable, reliable and aesthetically appealing range of Wood Flooring. These Wood Flooring offered by us are demanded by the clients because of their benefits like easy maintenance, ecological friendliness, affordable prices and large variety. We offer extremely attractive and stylish Wood Flooring to the clients in different patterns, colors and designs as per their requirements and dcor.

Finishes
  • Surfaces Finishes
  • Water-Based
  • Oil-Based
  • Acid-Cured
  • Moisture-Cured
  • Wax Finishes
  • Acrylic Impregnated

Grades
  • Clear
  • Select
  • Common
  • First
  • Second
  • Third
  • Cuts
  • Plainsawn
  • Quartersawn
  • Riftsawn

Minimum Order Quantity : One 20' container

Environmental Benefits of Wood Floors
Wood flooring is the most abundantly renewable flooring material available. The trees used to make wood floors are produced in a factory called a forest by a renewable source of energy called the sun. Sustainable forest management makes it possible to harvest wood without any serious impact on the environment, because trees are a renewable resource that can be replaced time and time again.

Environmental Facts about Wood Floors
  • Average annual net growth for hardwoods is greater than average annual removals (Source: US Department of Agriculture Forest Service)
  • Indoor air quality is better with wood floors (Source: US Environmental Protection Agency)
  • Wood is a carbon neutral product that produces oxygen during its growth cycle and stores carbon during its service life (Source: University of Wisconsin Wood Products Program Solid Wood Flooring Life Cycle Analysis)
  • Wood floors use less water and energy to produce than other flooring options (Source: University of Wisconsin Wood Products Program Solid Wood Flooring Life Cycle Analysis)
  • At the end of its service life, wood flooring can be burned as fuel or recycled (Source: University of Wisconsin Wood Products Program Solid Wood Flooring Life Cycle Analysis)
  • Wood floors last hundreds of years, so wont need to be replaced as often as other flooring options (Source: National Association of Home Builders)
  • While it takes most hardwood trees 40-60 years to mature, the inventory planted today wont be needed for 100-plus years (Source: National Wood Flooring Association)
View Complete Details

Wood Mouldings

We are a prominent Exporter, Importer & Supplier of Wood Mouldings. We offer Wood Mouldings in different grades such as N Grade, that refers to natural or clear finishes and the exposed face must be of one single piece and "P Grade" that means opaque paint finishes or overlays and can be finger jointed and or edge glued. These Wood Mouldings are widely demanded by the clients because of unique characteristics like small pitch pockets, light torn grain, light checks, small amount of medium pitch, etc.

Minimum Order Quantity : One 20' container

N-GRADE (suitable for natural, stain, paint or enamel finish)
On the basis of net 2" face 12 long this grade will admit the following characteristics or their equivalent.
  • A small spot of torn grain, one foot of medium pitch, light skip in dressing on back, or
  • One small and one very small pitch pocket, or
  • One short tight season check and a light snipe at one end, or
  • Medium stain in occasional (10%) pieces for one third the area in an otherwise perfect piece

Characteristics that will not show when piece is laid shall not be given the same consideration as characteristics elsewhere.

P- Grade (paint or overlay grade)
The same quality as N-Grade except stain is no defect. Glue joints (laminated or finger joints) must be precision machined and assembled with tight joints. Patching, filling or plugging is permitted providing a paintable surface results.

Lengths
Random lengths shall be 3 to 20 feet in multiples of one foot. Not over 15% of any one item shall be un-der 8 feet. When computing the percentage of shorts in casing and stops, pieces 7' in length will be considered long lengths.

Specified lengths of cut to length window and door trim shall be graded as completely useable.

Finger and/or laminated jointed mouldings may be ordered in specified lengths with not over 15% trimbacks permitted in any one item.

Adhesives
Adhesives used in finger joints or laminations shall meet the dry use adhesive performance requirements of ASTM D-3110-72 (or latest revision) "Standard Specification for Adhesives Used in Non-Structural Glued Lumber Products."

In situations where a Wet-Use adhesive is required, it shall be so specified, acknowledged and in-voiced.

Bundling : Bundling shall be in accordance with the Standard Western Wood Moulding and Millwork Producers Schedule.

Manufacturing Tolerances : Thickness and width + or - 1/32"

Definitions : Definitions of characteristics permitted in wood mouldings shall be those of the National Grading Rules for softwood lumber.

Settlement Provisions
In determining compliance with purchase specifications and of effecting settlement of invoices between buyers and sellers, each item of a shipment shall be considered as of the grade invoiced if upon re-inspection 95% thereof or more is found to be of said grade or better.


Download Detail File : Click Here


Download Detail File : Click Here
View Complete Details

Decking

We are a prominent Exporter, Importer & Supplier of Decking. We offer beautiful and exotic hardwood Decking solutions to the clients. We offer an FSC certified range of Decking Solutions that includes IPE Decking, Ipanema Decking and Hardwood Decking. Various options like Southern Yellow Pine, pure plastic or vinyl decking, saw-dust mixed with plastic resins and/or recycled plastics, etc., were used for Decking. With time, the use of tropical hardwoods gained importance. Hardwoods Decking has become a preferred choice of the clients because of its high durability, excellent density, sturdiness and outstanding aesthetic appeal with natural colors, texture and grain patterns. We offer reliable Decking Solutions to the clients in different sizes, profiles and categories at competitive prices.

Decking Sizes and Profiles
You can choose among various standard decking sizes to best suit your needs :
  • 5/4 x 6
  • 5/4 x 4
  • 1 x 6
  • 1 x 4

Lengths are random, in uniform bundles ranging from 7 thru 20 longs. Special sizes like 2 x 6 or 2 x 8 are available by special order and usually require longer delivery times. All the railings and accessories are also available :
  • Posts of 4 x 4 x 6 or 8 longs
  • Railings of 1 x 6 x random lengths
  • Balusters of 2 x 2 x 4

There are basically two profiles available for hardwood decking
  • Traditional: S4S (surfaced four sides), E4E (eased four edges)
  • European: grooved edges (for clip installation), and anti-slip - with reversible faces, one flat, the other with a soft reeded profile, which is also much cooler to the barefoot

All the wood (except Ipe) is carefully kiln-dried to an average moisture content of 15%, thus preventing excessive movement of the boards and minimizing surface checks.

Available Categories
  • Coated
  • Un-coated
  • Railings & Accessories
  • Decking Tiles
  • Special Orders

Grading Specifications
  • All decking and railing materials are to be kiln-dried to an average of 15% moisture content before milling and milled without showing any manufacturing defects, with uniform dimensions.
  • The wood must be free of any rot or decay. Minimal sapwood is allowed, not exceeding 10% of the width of any given piece or one foot in length on edges. No incipient decay caused by fungi is allowed. Minimal discoloration caused by weathering or chemical reactions is allowed.
  • All pieces must be structurally sound and maintain its original strength. Small worm-holes that do not impair the strength of the wood are permitted, provided they are scattered and not excessive to cause a bad appearance. No worm-holes with a diameter over 1/8 are allowed, except if properly sealed and sanded.
  • Surface checks or other drying defects are permitted only if not excessive. Extensive checking, twisting or excessive splits are not allowed. Checking is considered excessive when the appearance of any board is obviously impaired by the abnormal presence of surface checks and substantially different than a sound board.
  • When factory applied, the coating must be even and uniform, providing protection for all four sides of the wood. A sealant must be applied on both ends of every piece during installation.
  • The decking must be regularly maintained and cared for with a suitable product whenever the coating starts to fade or change the original color.
  • No creosote, pentachlorophenol, preserving salts or chlorides are to be applied under any circumstances.
  • Stains developing from ventilation stickers when drying are not considered a defect but should not be excessive as showing strongly through the coating or conspicuously present in many boards of any given lot.

Minimum Order Quantity : One 20' container

Download


Download Detail File : Click Here
View Complete Details

Plywood

We are a distinguished Exporter, Importer & Supplier of Plywood. We offer a wide range of Plywood that includes Birch Plywood, Okoume Plywood, Pine Plywood and Eucalyptus Plywood. We offer premium quality Plywood in various grades such as B/BB, B/C, C/C, Utility and Industrial. The Plywood supplied by us is also available in different dimensions, densities, thicknesses and varieties. Clients can avail durable, sturdy and finely finished Plywood to the clients at very affordable prices.

Plywood & Veneers Species
  • Virola (Baboen) - Virola Surinamensis
  • Breu - Protium Heptaphylum
  • Faveira - Parkia Multijuga
  • Sumauma - Ceiba Pentandra
  • Sande - Brosimum spp.
  • Pine - Pinus elliottii
  • Eucalyptus - Eucalyptus grandis

Minimum Order Quantity : One 20' container

Dimensions
  • Plywood 4x8 Foot
  • Platforms 4x6 - 4x7 - 4x8 Foot
  • Veneers 4x6 - 4x7 - 4x8 Foot

Density
  • Humidity on Faces 8-12%
  • Diagonal Tolerance 2mm
  • Thickness Tolerance +- 0.25mm
  • Kind of Glue Formaldehyde, Melamine or WBP

Grades (As per IWPA Grading Rules) :
  • B/BB
  • B/C
  • C/C
  • Utility
  • Industrial

Class of Glue Type I - W.P.B. or Type II - M.R.

Weight Per Crate

5.2 mm 12mm 15mm 18mm
20 Ibs 43 Ibs 55 ibs 68 Ibs

Sheets Per Crate

5.2 mm 12 mm 15mm 18mm
115 pcs 50 pcs 40 pcs 34 pcs

Board Construction

5.2mm 12 mm 5 ply 12mm 7 ply 15mm 18mm 7 ply 18 mm 9 ply
1.5 mm1.5mm1.5mm1.5mm1.5mm1.5mm
2.5 mm3.2mm2.mm3.2mm3.2mm2.5mm
1.5mm3.2mm2mm1.5mm3.2mm2mm
3.2mm2mm3.2mm3.2mm2.5mm
1.5mm2mm1.5mm3.2mm2mm
2mm3.2mm3.2mm2.5mm
1.5mm1.5mm1.5mm2mm
2.5mm
1.5mm
View Complete Details

Hardboard

Our company is engaged in exporting, importing & supplying of Hardboard. We offer high quality Motek Hardboard that is manufactured using pure wood fibers, which are bonded together at high temperature and pressure specifically from CURUPAU. These Motek Hardboards are made without the use of adhesives or chemical resins. Resistance to humidity, dimensional stability, ease of use, smooth surface, and durability are some of the attributes for which the Hardboard offered by us is widely demanded. The Motek Hardboard we supply is used in different industries like Furniture, Automotive, Textile, Construction, etc., for fabricating Doors, Kitchen Furniture, Ceilings, Fruit Packaging and Mobile Homes.

Types
  • Laminated
  • Painted
  • Medium Density Particle board
  • Perforated smooth & painted
  • Overlay
  • Smooth

Minimum Order Quantity : One 20' container
View Complete Details

Stock Available

Ipe Decking : FAS, K/D 12-14%, S4S, E4E
  • 01 x 40' containers
  • 3/4" x 5-1/2" x 10' and up
    Shipment : 10-15 days

Ipe Decking : FAS, A/D, S4S, E4E
  • 05 x 40' containers
  • 1" x 5-1/2" x 8' and up
    Shipment : Prompt

Ipe Decking : FAS, A/D, S4S, E4E
  • 02 x 40' containers
  • 1" x 4" x 8' and up
    Shipment : Prompt

Ipe Decking : FAS, A/D, S4S, E4E
  • 01 x 40' container
  • 5/4" x 4" x 8' and up
    Shipment : Prompt

Bloodwood Lumber : FAS, A/D, Rough Sawn
  • 01 x 40' container
  • 4/4 GMS
    Shipment : Prompt

Ipe Decking : K/D 14-16%, S4S, E4E - Premium Grade
  • 01 x 40' containers
  • 3/4" x 5-1/2" x 8' and up
    Shipment : 30 days

Ipe Decking : FAS, A/D, S4S, E4E
  • 03 x 40' containers
  • 3/4" x 5-1/2" x 8' and up
    Shipment : 30 days

Tigerwood Decking : FAS, K/D, S4S, E4E
  • 03 x 40' containers
  • 3/4" x 5-1/2" x 8' and up
    Shipment : 30 days
  • 01 x 40' container
  • 1" x 5-1/2" x 8' and up
    Shipment : 30 days

Garapa Decking : FAS, K/D, S4S, E4E
  • 03 x 40' containers
  • 1" x 5-1/2" x 8' and up
    Shipment : 30 days

Cambara Decking : FAS, K/D, S4S, E4E
  • 02 x 40' containers
  • 3/4" x 3-1/2" x 8' and up
    Shipment : Prompt

  • 01 x 40' container
  • 1" x 5-1/2" x 8' and up
    Shipment : Prompt

Angelim Amargoso Lumber : K/D, S4S, Truck Flooring
  • 02 x 40' containers
  • 1-1/8" x 7-3/8" x 8' and up
    Shipment : 30 days

Tigerwood Decking : FAS, K/D 16%, S4S, E4E
  • 01 x 40' container
  • 1" x 5-1/2" x 8' and up
    Shipment : Prompt

Jatoba Lumber : Selects & Better, K/D 6-8% MC
  • 02 x 40' containers
  • 1" x 6" x 6-20'
  • 01 x 40' container
  • 1" x 8" x 6-20'
  • 03 x 40' containers
  • 4/4 RWL (max 10% 4-5" wides - max 15% 6-7' longs)
  • 01 x 40' container
  • 5/4 RWL (max 10% 4-5" wides - max 15% 6-7' longs)
    Shipment : 30 days

IPE DECKING : FAS
  • 5/4" x 6" x 7' up
  • 02 x 40' containers
  • 3/4" x 6" x 7' up
  • 01 x 40' container
  • 21mm x 145mm x 7' up
    Shipment : 30 days

GARAPA DECKING : FAS
  • 02 x 40' containers
  • 5/4" x 6" x 7' up
  • 01 x 40' container
  • 3/4" x 6" x 7' up
    Shipment : 30 days

Cumaru Decking : FAS
  • 02 x 40' containers
  • 3/4" x 6" x 7' up
    Shipment : 30 days

Massaranduba Decking : FAS
  • 02 x 40' containers
  • 5/4" x 6" x 7' up
    Shipment : 30 days

IPE Decking : FAS, S4S, E4E, A/D
  • 02 x 40' containers
  • 21mm x 145mm x 2.1m up
  • 01 x 40' container
  • 21mm x 100mm x 2.1m up
    Shipment : 30 days

Hardboard
  • 2.5mm X 5' X 8'
  • 2.5mm X 5' X 11'
  • 25 Mt per 40' Container
  • 10, 000m2 per 40' Container
    Shipment : Prompt

Flooring Stocks Available

SpecieQualityMoistureThicknessWidthLength
JatobaFirst QualityKd 6-8%3/4"5"1' to 7' average 2,8' to 3.5' Random
CumaruFirst QualityKd 6-8%3/4"5"1' to 7' average 2,8' to 3.5' Random
Cumaru RosaFirst QualityKd 6-8%3/4"5"1' to 7' average 2,8' to 3.5' Random
IPEFirst QualityKd 6-8%3/4"5"1' to 7' average 2,5' to 3.0' Random
MuiracatiaraFirst QualityKd 6-8%3/4"5"1' to 7' average 2,8' to 3.5' Random
GarapeiraFirst QualityKd 6-8%3/4"5"1' to 7' average 2,8' to 3.5' Random
Sucupira PretaFirst QualityKd 6-8%3/4"5"1' to 7' average 2,8' to 3.5' Random
CumaruFirst QualityKd 6-8%3/4"4"1' to 7' average 2,8' to 3.5' Random
MuiracatiaraFirst QualityKd 6-8%3/4"4"1' to 7' average 2,8' to 3.5' Random
JatobaFirst QualityKd 6-8%3/4"3 1/4"1' to 7' average 2,8' to 3.5' Random
CumaruFirst QualityKd 6-8%3/4"3 1/4"1' to 7' average 2,8' to 3.5' Random
Cumaru RosaFirst QualityKd 6-8%3/4"3 1/4"1' to 7' average 2,8' to 3.5' Random
MuiracatiaraFirst QualityKd 6-8%3/4"3 1/4"1' to 7' average 2,8' to 3.5' Random
Muiracatiara RusticFirst QualityKd 6-8%3/4"3 1/4"1' to 7' average 2,8' to 3.5' Random
Sucupira PretaFirst QualityKd 6-8%3/4"3 1/4"1' to 7' average 2,8' to 3.5' Random
Orelha de MacacoFirst QualityKd 6-8%3/4"3 1/4"" 1' to 7' average 2,8' to 3.5' Random
JatobaFirst QualityKd 6-8%3/4" 2 1/4"1' to 7' average 2,5' to 3.0' Random
CumaruFirst QualityKd 6-8%3/4"2 1/4"1' to 7' average 2,5' to 3.0' Random
IpeFirst QualityKd 6-8%3/4"2 1/4"1' to 7' average 2,5' to 3.0' Random
MuiracatiaraFirst QualityKd 6-8%3/4" 2 1/4"1' to 7' average 2,5' to 3.0' Random
View Complete Details

Ipe Decking

2 Lakh /Cubic Meter Get Latest Price
  • Min. Order (MOQ) 18.5 Cubic Meter
FAS, S4S, E4E, AD, 25 x 140 or 19 x 140mm x 2.13m longs up to 5.40m. Min one 40' container. Regular shipments available. Legal origin and sustainable.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Romel Bezerra (Intersomma, LLC)
  • 20189 NW 9th Drive, Pembroke Pines, FL - 33029, United States
  • Share us via