Lubricants #5146771

Phoenix 505 Pipe Joint Lubricant is a soft, water soluble paste. It is a stable blend of vegetable oil, soaps, and lubricity enhancers. Phoenix 505 is certified by the Water Quality Association for use in potable water systems.

Phoenix 505 is excellent for potable water pipelines, and is certified to meet NSFANSI Standard 61 requirements. Phoenix 505 Pipe Joint Lubricant is tested safe for use on most common gasket materials.

Technical Data

Form: Paste
Color: Amber
Odor: Bland
Phosphates: None
Water Solubility: Complete
Petroleum Content: None
Total Base Number: 40-45 mg KOH equivalent per gram
Flash Point: 220F (contains water)
Bulk Density: Approximately 8.3 lbs.gallon

Phoenix 27-XL effectively lubricates pipe and pipe gaskets for safe and efficient assembly of all types of pipelines, especially potable water pipelines. Phoenix 27-XL will not leave residue.

Phoenix 27-XL is certified to meet NSFANSI Standard 61 for potable water pipelines. Made without petroleum, Phoenix 27-XL will not swell gaskets.

Phoenix 27-XL is a non-hazardous lubricant made from a biodegradable blend of soaps and lubricity enhancers. Mating of abutting pipes forces the paste into the cavity, thus providing the needed lubrication to complete coupling and seal the joint. The soap-based lubricant does not dry out when gaskets are stored in sealed plastic containers or bags.

Phoenix 27-XL maintains its soft, creamy paste consistency and off-whitetan color. Formulated to perform in a wide temperature range, Phoenix 27-XL can be used from -10 to 150F. Phoenix 27-XL can be used on all types of pipe including asbestos cement, cast iron, concrete, plastic and clay pipe. It will not deteriorate natural rubber, synthetic rubber or plastic gaskets.

Phoenix 27-XL is certified to meet NSFANSI Standard 61 for potable water system uses. Both JTM and NSF use strict analytical standards and formulation consistency to assure production of a safe lubricant for water pipe joining. Phoenix 27-XL will not impart taste, color or odor in pipelines flushed in accordance with recommended AWWA procedures.

Phoenix 27-XL utilizes environmentally friendly raw materials common in the soap and lubricant industries. It will not irritate the hands and is not toxic. It can be cleaned using warm water and soap. Phoenix 27-XL Pipe Joint Lubricant contains no petroleum oils or phosphates.

Technical Data

Form: Creamy Paste
Color: Off-white
Odor: Bland
pH (5% in water) = Approximately 9.0
Bulk Density: Approximately 9.3 lbs.gallon
Maximum Penetration: 360 @ 77F

Can be applied from -10 to 150F
Soft, creamy compound
Meets NSFANSI Standard 61
Will not support bacteria
Contains no petroleum
Slow rate of solubility
Non-toxic
Biodegradable
Will not separate
FBC System compatible

Absolutely petroleum free! Petroleum products are the enemy of rubber. Yet other companies sell black grease made from petroleum products, specifically for the purpose of mounting tires! Tire manufacturers state that petroleum-based lubricants are NOT to be used on tires.

Avoid all the potential tire and wheel problems by using Murphy's Black Lube. Murphy's is made from renewable oils, and NO petroleum based products.

Murphy's Black Lube is a petroleum-free, paste type tire mounting lubricant which prevents rust and scale from forming on rim surfaces, side rings and ring channels.

Murphy's is a soft, non-water dispersible paste. It is a stable blend of vegetable oil, soaps, surfactants, mineral fillers and water. It is excellent for use in all types of tire mounting systems. Tested safe for use on most common rubber materials, Murphy's Black Lube is a great choice for challenging applications.

Technical Data

Form: Paste
Color: Black
Odor: Bland
Phosphates: None
Water Dispersibility: Trace
Petroleum Content: None
Viscosity: 100, 000 cps
Flash Point: 220F (contains water)
Percent NVM: Approximately 95% by weight
Will not swell or affect rubber, especially inner tubes
Stops the bonding or "freezing" of tire beads to tire rims and allows for easy, damage free removal of tires later on
Excellent temperaturestability usability range, -10 to + 150F, which makes it ideal under harsh weather conditions
Great for all-terrain and large commercial tires
Non-water dispersible
Stable from 20 to 100F
No objectionable odor
Will not support bacterial growth
Contains no phosphates
Contains no petroleum oils

Phoenix 713-A Pipe Joint Lubricant is a soft, non-water dispersible paste. It is a stable blend of vegetable oils, soaps, surfactants, and mineral fillers. Mating of abutting pipes forces the paste into the cavity, thus providing the needed lubrication to complete the coupling and seal the joint. Phoenix 713-A is a soap and surfactant lubricant that does not dry out when gaskets are stored in a sealed container.

Phoenix 713-A has a soft paste consistency and tan color, and it can be used from 10 to 110F. Phoenix 713-A can be used on all types of pipe including asbestos cement, cast iron, concrete, plastic and clay. It will not deteriorate natural rubber, synthetic rubber or plastic gaskets.

Phoenix 713-A is certified to meet NSFANSI Standard 61 requirements for use in potable water systems. JTM uses strict analytical standards and formulation consistency to assure consistent production of a safe, high-quality lubricant for water pipe joining needs.

Phoenix 713-A utilizes environmentally friendly raw materials common in the soap and lubricant industries. It will not irritate the hands and is not toxic. It can be cleaned using warm water with soap or detergent. It contains no petroleum oils or phosphates.

Effectively lubricates pipe and pipe gaskets for safe and efficient assembly of all types of pipe. Water insoluble formula is excellent for underwater pipe assembly. It will not wash off pipe or gaskets under the harshest of weather or job site conditions.

Certification provided by the Water Quality Association.

Technical Data

Form: Soft Paste
Color: Tan
Odor: Bland
Bulk Density: Approximately 12 lbs.gallon
Non Volatile Materials: Approximately 88%
Total Alkalinity: 10-30 mg KOHg equivalent
Penetration: 300-350 110mm @ 77F

Ease-On Pipe Joint Lubricant effectively lubricates pipe joints and gaskets for safe and efficient assembly of all types of pipelines, especially potable water systems. Ease-On will efficiently dissipate and not leave a residue when flushed in accordance with recommended AWWA procedures.

Ease-On Pipe Joint Lubricant is certified to meet NSFANSI Standard 61 for potable water pipelines. Both JTM and NSF use strict analytical standards and formulation consistency to assure production of a safe lubricant for water pipe joining requirements. In addition, Ease-On is FBC System Compatible.

Ease-On is a non-hazardous lubricant formulated from a biodegradable blend of lubricity enhancers and soaps. Mating of abutting pipes forces the paste into cavities, thus providing the needed lubrication to complete the coupling and seal the joint. The soap-based lubricant does not dry out when gaskets are stored in sealed plastic containers or bags.

Ease-On is formulated to work well in very cold or very hot temperatures. Since Ease-On is petroleum and phosphate free, it will not swell gaskets. Ease-On is a blend of environmentally friendly raw materials common in the lubricant and soap industries. It will not irritate the skin, and is non-toxic. Ease-On can be cleaned using warm water and soap.

Technical Data

Form: Creamy Paste
Color: Off-white
Odor: Bland
pH (5% in water) = Approximately 9.0
Bulk Density: Approximately 9.3 lbs.gallon
Maximum Penetration: 360 @ 77F