United States Verified Supplier
We are leaders in the market for providing best range of Trio Frame Tents, KD Classic Frame Tents, Barn-Top Pop-Up Canopies, PartyShade Pop-Up Canopies and XTF Pop-Up Canopies
When you have an event that requires a larger covered area or one that will last an extended period of time with resistance to wind and snow, choose the KD Trio or KD Classic canopies. The durable, long-lasting Trio can cover spaces from 10' x 10' all the way up to 20' x 30', with even larger options available with the KD Classic. These units can be set up for months or even years. High strength and durability are the key. Molded steel fittings, easy-snap buttons, marine-grade aluminum and stainless-steel buckles set the KD Trio apart from competitors. The weatherproof 18-oz black-out vinyl cover is UV treated, water resistant and fire retardant. We use stainless steel buckles to attach the cover to the frame, which reduces staining or marking from rust and further extends the life of your tent. The KD Trio offers three styles of tops: the Traditional, the Tension and the High Peak. The Tension and High Peak styles use tension straps on the corners that pull down and hook into the bottom of the legs. The High Peak canopy uses a single mast that pushes the top twice as high, giving the canopy a unique, elegant look. All High Peak canopies come with a pennant flag in the same color as the top. These canopies are available in 10’, 15’ or 20’ widths and can reach 40’ in length. Features Gallery Setup Instructions Graphic Requirements KD Trio Features Traditional Tension High-Peak RED VINYL COLOR CHOICES Move cursor over color swatches to view FRAME • Tested to withstand wind up to 80 mph (cross-bracing is a must on 20’ x 20’ and larger canopies and is available on all sizes) • Frame base plates are detachable cast aluminum • Tent tubing made of 6005 T-8 anodized marine aluminum • Commercial snow load ratings • Assembly uses “failsafe” steel snap button • 10-year performance warranty on all fittings • Adjustable leg heights: 6’6”, 7', 7’6” and 8’ (additional 5' setting allows easy installation of the tent top) AVAILABLE SIZES • 10'x10', 10'x15, 10'x20', 10'x30', 10'x40. • 15'x10', 15'x15', 15'x20', 15'x25', 15'x30' • 20'x10', 20'x15', 20'x20', 20'x30' CANOPY TOP • All tent coverings are made of top-quality 18-oz vinyl • Covers are flame-retardant, UV-treated and mildew-resistant • Expandable tops use a vinyl grommet R.F.-welded into the fabric • Top seams are 100% electronically welded • Straps and buckles are double-reinforced for extra durability • Stainless steel buckles protect vinyl from rust stains • Storage cover bag included with purchase Download KD Trio Catalog Home About Us Canopies & Tents More Branding Tools Examples Specials Customer Service Request a Quote All canopy covers are offered in an array of solid colors or stripes. We can even cover the entire top in digital graphics. When you are looking to create excitement at your next event, look to our Classic and Trio canopies.
When you have an event that requires a larger covered area or one that will last an extended period of time with resistance to wind and snow, choose the KD Classic or KD Trio canopies. The durable, long-lasting Classic is the most frequently used in the tent industry for covering large areas, with size options from 30'x30' all the way up to 40'x100'. This popular cover attaches to the frame with straps and buckles on the inside perimeter of the tent. Additionally, the valance on the Classic-style cover has scalloped edges. Expandable covers are also available in the Classic style. These units can be set up for months or even years. High strength and durability are the key. Molded steel fittings, easy-snap buttons, marine-grade aluminum and stainless-steel buckles set the KD Classic apart from competitors. The weatherproof 18-oz black-out vinyl cover is UV treated, water resistant and fire retardant. We use stainless steel buckles to attach the cover to the frame, which reduces staining or marking from rust and further extends the life of your tent. Home About Us Canopies & Tents More Branding Tools Examples Specials Customer Service Request a Quote Features Gallery Graphic Requirements Setup Instructions KD Classic Features FRAME • Engineered and wind load tested up to 90 MPH • Snow load rated • Tubing is manufactured of 6005 T-6 anodized marine aluminum • 30’ wide tents include double-tube corner rafters, 2” mid-rafter, and 2” sidebars • 40’ wide tents include double-tube corner rafters, double-tube mid rafters, and 2” sidebars • Galvanized steel Flo-coat fittings • Failsafe steel snap button assembly • Adjustable leg height 7’, 8’, 9’ • 38” steel cable(s) with plastic coated 4” hooks are included on frames 60’ and longer • Anchoring included • Cross-brace systems are available on all Classic frame sizes
KD Kanopy’s designers are always striving for new ways to enhance our canopies, to find that creative piece or element that will set you apart. Our new Barn-Top and Barrel-Top canopies are the result of their creativity. Using our industrial-strength, powder-coated steel frame and special new fittings, this roof frame gives you 75% more area for graphics and a unique look that will stand out. Easy to set up, it uses a 500-denier polyester top that is available in seventeen colors. It's ready for custom screen printing or full-color, all-over digital printing and comes with a rolling bag and ground spikes. The patent-pending design of the Barn-Top canopy is only available in the 10' x10' size. This exciting new addition to our canopy line will change the look of your booth and attract the attention that brings customers to your area. Side panels, rail curtains, and weights are also available (see our Accessories page). Features Specifications Gallery Setup Instructions Graphic Requirements Replacement Parts Barn-Top Canopy Features FRAME • Five-year warranty • Powder-coated steel frame available in white or black • Barn top structure is assembled and placed on top of pop-up frame • Up in less than five minutes with just two people • For indoor and outdoor use • Dynidiom joint fittings add strength and stability • Free heavy-duty wheel bag and field spikes CANOPY TOP • One-year warranty • 500 Denier Oxford Polyester is strong and lightweight • Water-resistant, fire-retardant to CPAI-84 & NFPA 701, and UV-protected • Seventeen bold colors • Custom screen-printed graphics or full-coverage digital printing available
Make your branding vision a reality with the graphic flexibility of this cost-effective canopy. The KD PartyShade, a one-piece pop-up canopy, is the perfect solution for consumers or businesses in need of a budget-friendly canopy. This low-cost canopy line features the same design as our aluminum-frame Majestic units, but employs a more cost-effective steel frame. Powder-coated to help minimize rust and keep your PartyShade looking its best over time, the frame is covered by a five-year guarantee. The PartyShade is available in 10’x10’, 8'x8', and 5'x5' sizes. Dynidiom joint fittings offer added strength and stability to your KD Kanopy unit. They eliminate metal-on-metal contact and allow for the quickest set up possible. 500 Denier Oxford Polyester Fabric is used to make all canopy tops, side panels, rail curtains, and table covers. This fabric comes in a variety of colors, is lightweight, durable, water-resistant, UV-protected, and meets fire code regulations. Use your PartyShade canopy repeatedly in all weather conditions, including intense sun
Part beauty and part beast, our brand new XTF canopy takes strength and durability to the next level and then tops it off with bold colors and stunning graphics. This heavy-duty anodized aluminum frame is one of the toughest on the market — 33% stronger than other aluminum frames. Beefy 40mm industrial-strength hex-shaped legs contribute to a frame so rugged that a 300-pound man can hang from the scissor bars. Not just a brute though, this lifetime-warranty structure has refinement too. Nylon-resin composite fittings eliminate the binding associated with the metal-on-metal contact of competitors' frames, giving you a smooth-gliding, well-mannered support system. Set-up and height adjustments are facilitated with simple pull-ring snap locks. Knowing you have that kind of brawn supporting your canopy is reassuring, but your tent needs to look good too. It's all about image and KD Kanopy has you covered with edge-to-edge full-color 1, 000 dpi digital printing. Vacuum heat-sealed screen-printed graphics are a second option for less complicated graphics. Both processes are accomplished on quality 500 Denier polyester fabric available in a range of 17 bold colors. All printing and sewing is done in-house so we can assure you of the best quality possible and provide a 1-year warranty on your top. As the inventor of the pop-up canopy, KD Kanopy has been supplying the market with the highest quality canopy designs for more than 30 years and the XTF is one of the best in the country! Available in three sizes — 10'x10', 10'x15', and 10'x20' — it's built extremely tough and made to last a lifetime at a cost that wont break the budget. Click on the size you need for more details and specifications.
Unlimited graphic possibilities with a lifetime-warranty commercial-grade aluminum frame One of our top-selling canopies, the Majestic series of portable tents, provides great versatility and excellent visual appeal. Three sizes are available — 10'x10', 10'x15', and 10'x20' — with 17 bold color choices to cover your space. The graphic possibilities are boundless. Choose screen printing or full-color edge-to-edge digital printing. The Majestic from KD Kanopy gives you maximum flexibility for customization and branding. As the inventor of the pop-up canopy, KD Kanopy has been supplying the market with the highest quality canopy designs for more than 30 years. 16-gauge anodized aluminum is used to construct every one of these commercial-grade canopies. Unlike similar steel-framed units, our Majestic canopy frames will not rust over time. Covered by a lifetime warranty, this model is 40% stronger and 25% lighter than the original steel-frame canopies. Compare all the features of our portable canopy models in our useful pop-up comparison table.
The KD StarTwin will have you seeing double! It’s two StarShades combined into one. This tension-fabric structure is supported by two center poles and ground-up tension. KD Kanopy’s unique design is ideal for special promotions and outdoor events. Six elegant arches give added visual appeal and, at 7.5’ high, make entry into the covered area easy. The high-strength aluminum center poles won’t rust so your tent will look great for years to come. Each of the StarTwin models folds down into four carry bags that fit into most standard vehicle trunks. The tension design requires a ground depth that will allow 30-inch stakes or you can use our new StarShade Plates to set up on a hard surface.
Standing at 21' high, the KD StarStage 550 canopy is a band-shell design and is excellent for audience viewing and quality acoustics. This tent gives you 550 square feet of completely covered space, the actual footprint being larger than the covered area. The StarStage 550 requires a 55-foot diameter set-up area and folds down into three carry bags to fit into the trunk of most standard vehicles. KD Kanopy developed the design of the StarStage and we remain the sole manufacturer of this tent. Four elegant arches rise to 7.5' while the front opens to 11.3'. Quickly set up the StarStage tent outdoors in approximately 20 minutes. This tent requires 30-inch ground spikes or StarShade hard-surface plates to support the tension structure. Features Specifications Gallery Setup Instructions Graphic Requirements Replacement Parts StarStage 550 BASE • Unique Tension Structure Design • 550 Square Feet of Complete Coverage Area • Five Elegant Arches and Open Front Area • Aluminum Parts—no rusting • Sets Up in Minutes • Canopy is for Outdoor Use—requires depth for 30 inch stakes • Free Carry Bags for Complete Unit TENT TOP • 500 Denier Oxford Polyester—both strong and lightweight • Water Resistant, Fire Retardant, and UV Protected • Seventeen Bold Canopy Colors • Custom screen-printed graphics or full-coverage digital printing available
Our design team never rests here at KD Kanopy; hence, our recently introduced Barrel-Top canopy. KD’s new, special fittings fostered the design of this barrel motif, a unique look that will mark your brand. This style has not been seen in the marketplace before now. Our patent-pending design provides 75% more graphic visibility than the standard canopy top. Just another outstanding example of our quest to offer you creative options that define your brand or service. Using our industrial-strength, powder-coated steel frame, the barrel top simply snaps into place. This canopy tops the competition and will look great with custom screen printing or full-color digital graphics. Available in a 10' x10' size only. Side panels, rail curtains, and weights are also available (see our Accessories page). Features Specifications Gallery Setup Instructions Graphic Requirements Replacement Parts Barrel-Top Canopy Features FRAME • Five-year warranty • Powder-coated steel frame available in white or black • Barrel top structure is assembled and placed on top of pop-up frame • Up in less than five minutes with just two people • For indoor and outdoor use • Dynidiom joint fittings add strength and stability • Free heavy-duty wheel bag and field spikes CANOPY TOP • One-year warranty • 500 Denier Oxford Polyester is strong and lightweight • Water-resistant, fire-retardant to CPAI-84 & NFPA 701, and UV-protected • Seventeen bold colors • Custom screen-printed graphics or full-coverage digital printing available