Our Products #4951164

These nozzles are excellent for getting inside tight places like bridge lattice, behind flanges or inside pipe. Many operators waste abrasive and time waiting for ricochet to get the job one. No nozzle tool chest should be without an angle nozzle. These nozzles are available in tungsten carbide, boron carbide, and ROCTEC featuring long life blast outputs between 0 and 125 relative to the input openings. Available with single, double, triple, or quadruple outlets.

For use with compressed air source.

The occupational safety and health administration (osha) has assigned Apollo helmets a protection factor of 1, 000 times the exposure limit for lead dust.

The Apollo 20 LP is a Type CE, continuous flow, supplied-air respirator with Constant-Flow Connector for abrasive blasting, to be used with an ambient air pump. The high visibility red single-shell helmet has a box-front window, and a protective cape.

GlassBlast is engineered for high performance blast media applications. Environmentally friendly the product contains no free silica or heavy metals and will eliminate surface impingement or particle imbedding. Give your surface a bright finish. GlassBlast is recycled crushed glass.

Available in three Mesh sizes, 1220, 2046, 4670, provide a range of blasting media to suit every need from a large granular blend, which is used for blasting steel, to an blend that is a better substitute for baking soda or cornstarch used for soft metal (non-ferrous) surfaces. GlassBlast can be used as a substitute for most blast media.

Need to touch up a small area or blast in a confined space, both with minimal clean up

When the equipment needs to be compact, easy to assembledisassemble and powered by one source.

Fiber-reinforced Nylon nozzle holder for abrasive blast cleaning - with Contractor threads.

Purpose
The Clemco fiber-reinforced Nylon nozzle holder attaches to the end of a blast hose and holds a contractor-thread blast nozzle.

Description of Operation
The blast hose must be cut squarely and cleanly. The nozzle holder is installed with the screws provided. These screws penetrate the outer wall, but not the inner wall of the blast hose.
In operation, the air pressure inside the blast hose helps hold the nozzle holder securely in place.
A nozzle washer must be placed on the shoulder inside the nozzle holder to prevent premature wear and failure, of both the holder and the nozzle, from high speed abrasive.

Using "economical" blast media, such as slag, for industrial blasting can be very costly indeed. Because these low-cost abrasives break down so quickly, reusing them is impractical. As a result, youre constantly paying for replacement media, disposal of spent media, and man-hours to move this material around-all of which can put a big drain on your profits.
With Empires pneumatic Blast & Recovery System (PRS), you can tap the cost-saving advantages of more durable media for only a modest investment. Empires PRS lets you move up to recyclable media, such as Aluminum oxide, chilled iron and steel grit, which can be used effectively over and over-from 6 to 200 times. The result is usually a very attractive return on investment in media savings alone.
Reusable media are also faster acting and less dusty, meaning you get the additional advantages of increased productivity and a cleaner working environment. With the PRS, you can move blasting operations into enclosures to comply with increasingly stringent environmental regulations. And, because the PRS recycles good media while removing dust and fines, blasting results are more consistent.
Simple blast controls and convenient media-loading procedures make Empires PRS very easy to operate. A built-in access ladder and viewing window in the systems storage hopper are just two examples of the PRS's many friendly features. And, with heavy-duty duct, an Ultrawear-lined reclaimer, and a silicone carbide nozzle, you know the system is designed to last.

ZERO BNP Wetblast cabinets deliver affordable, dust-free media blasting to efficiently clean and finish all kinds of parts. The wetblast process produces a smooth surface, a bright shine, and does not produce static electricity common in dry blast operations.

Industries Served

Aerospace
Automotive Manufacturing
Automotive Rebuilding
Aircraft Component Manufacturing
Rapid Prototype Services
Medical Instrument Fabrication
Public Utilities
Military

Commonly Processed Parts

Glass Bead: Rapid-prototype master models & cast polyurethane parts, Semiconductors, Microprocessor & Electronic components, Jewelry, Stainless Steel Medical Instruments, Oxygen Compressors, Aircraft Components, Water Meters

Aggressive Media: Titanium parts for removal of heat scale or oxidation, Automotive air compressor parts, Engine parts

Two Soft King models are available: one that operates in dry-mode only and another that offers the option of operating in wet-mode or dry-mode.

Model 1 (Stock No. 22505) for dry-mode operation only

Cart-mounted pressure vessel with 60-degree conical bottom for enhanced lightweight media flow
1.5 cubic feet media capacity
5-psi to 150-psi working pressure
Internal media agitator
Automatic pop-up valve
1 14" ID piping
Manually-adjustable diaphragm-style media metering valve
Pneumatic remote controls with RLX control handle and 50 ft remote control hose

Increase Blasting Profitability
Eliminate Flash Rusting, Clogged Blast Pots and Downtime
Small Footprint
Complete Portability
Low Pressure Drop