Product / Services
Post Buy Requirement

My ExportersIndia

For Buyer

For Seller

For Help

KL

Klein
location United States

Write a Review
Call Now Call Now

Our Products

  1. Cutting Pliers

    2 Products available

  2. Electronic Test Instruments

    1 Products available

  3. Hand Tool

    1 Products available

  4. Electric Cutting Tools

    1 Products available

  5. Electrical Contractors

    1 Products available
  6. Others Products 4 Products available

Our Products

Our offered Product range includes Block & Tackle with Guarded Hooks, Cable Bender, Cable Insulation Knives and Nut Drivers.

Block & Tackle With Guarded Hooks

Block & Tackle With Guarded Hooks

  • Weight 2.9 lb (1.3 kg)
  • Cat. No H1802-30
These are NOT occupational protective hooks. NOT for human support.Light, galvanized-steel shell blocks are fitted with snubbing hooks to hold the load.Sheaves are strong yet lightweight aluminum alloy with all-bronze bushings.Available with standard snap hooks or guarded snap hooks (with snap hook nose lengthened to extend over the latch or keeper).Choice of forged hook Cat. No. 258 or swivel hook Cat. No. 259.All Klein block and tackle use high-quality, 38'' (10 mm) diameter rope.25 ft (7.62 m) rope length.Hooks fit under insulator and engage pin on cross arm.Maximum safe load is 750 lbs. (340 kg)
View Complete Details
Ask Latest Price & Details
Cable Bender

Cable Bender

  • Overall Length 12'' (304.8 mm)
  • Cable Capacity 350 MCM
Handle is contoured for a firm, comfortable grip.It is recommended that two benders be used for easier bends.Capacity: 350 MCMOverall Length: 12-Inch; Tool Opening: 78-Inch
View Complete Details
Ask Latest Price & Details
Cable Insulation Knives

Cable Insulation Knives

  • Cat. No 44218
  • Weight 0.36 lb (0.16 kg)
Heavy-duty sheepfoot blade is easily replaceable to eliminate the need for sharpeningHandle has rubberized grip and release lever for lockback mechanismReplaceable 440A Stainless Steel blade is held securely by a captive screwThumb stud for easy openingPocket clip keeps knife readily availablePatent Pending
View Complete Details
Ask Latest Price & Details
Diagonal Cutting Pliers Pointed

Diagonal Cutting Pliers Pointed

  • Weight 0.13 lb (0.06 kg)
  • Jaw Length 1/2'' (12.7 mm)
Sharp pointed nose for precise tip cutting and trimming printed circuit boards.Spring-loaded for self-opening action.Short jaws and beveled cutting edges permit close cutting of wire.Induction-hardened cutting knives for long life.Hot-riveted joint ensures smooth action and no handle wobble.Plastic-dipped handles for comfort and ease of identification.Custom, US-made tool steel
View Complete Details
Ask Latest Price & Details
Diagonal Cutting Pliers

Diagonal Cutting Pliers

  • Cat. No. D252-6
  • Overall Length 6-1/8'' (155.6 mm)
Heavier design for all-purpose use.Tapered nose for easy working in confined areas.Short jaws and beveled cutting edges permit close cutting of wire.Induction-hardened cutting knives for long life.Hot-riveted joint ensures smooth action and no handle wobble.Plastic-dipped handles for comfort and ease of identification.Custom, US-made tool steel
View Complete Details
Ask Latest Price & Details
Clamp Meters

Clamp Meters

  • Weight 0.90 lb (0.41 kg)
  • Cat. No CL330
  • Jaw Size 1-1/8'' (28.6 mm)
  • Width 3-1/32'' (77.0 mm)
Features best-in-class high-visibility dual-line OLED display screen, which presents information in reverse contrast to standard meters.High-visibility in reduced ambient lighting, as well as bright outdoor environments, and at acute angles to display.Provides all common measurements such as AC current, ACDC voltage, continuity, resistance, capacitance, frequency, diodes and temperature.True RMS measurement technology.Dual-mode display can present simultaneous measurements.Bar graph emulates performance of an analog meter for visualizing fast moving events.Rugged Klein 'tough meter' industrial design stands up to jobsite demands.Includes test leads, K-type thermocouple, 3xAAA batteries and a protective carrying case.CAT III 600V safety rating.
View Complete Details
Ask Latest Price & Details
Screwdrivers and Nut Drivers

Screwdrivers And Nut Drivers

  • Cat. No 640-1/2
  • Shaft Length 3'' (76.2 mm)
  • Hex Size 1/2''
Entire shank plastic coated for circuit protection only. NOT INSULATED.Special plastic coating resists cutting, cracking, and chipping.Thin coating permits use in confined areas.Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications.Internal flanges provide solid, twist-resistant shaft anchor.Premium chrome plated for smooth feel and corrosion resistance.Meets or exceeds applicable ASME ANSI specifications.Handle end is also color coded for easy identification.Cushion-Grip handle allows for greater torque and comfort.Tip-Ident quickly identifies nut driver and siz
View Complete Details
Ask Latest Price & Details
Bolt Cutter

Bolt Cutter

  • Cat. No 63831
  • Weight 3.1 lb (1.4 kg)
Forged, alloy tool steel blade is precision ground for sure, efficient cutting and long life.Cuts soft, medium and hard metals.One adjustment realigns cutting edges.Cutting capacities for soft and medium materials is up to Brinell 300, Rockwell C31.Cutting capacities for hard materials is up to Brinell 400, Rockwell C42.Not for cutting cable.
View Complete Details
Ask Latest Price & Details
Anti-slip Silicone Strap Head Lamp

Anti-slip Silicone Strap Head Lamp

  • Weight 0.30 lb (0.14 kg)
  • Batteries 3 x AAA

Anti-slip silicone strap keeps lamp securely fastened to hard hat. 45-degree tilt capability for varied beam direction. Easy-open battery compartment. Two modes: spot and floodlight. Strap pre-adjusted for quick fit to hard hat. 6-foot drop protection. 3 x AAA batteries included

View Complete Details
Ask Latest Price & Details

Nut Drivers

Entire shank plastic coated for circuit protection only. NOT INSULATED.Special plastic coating resists cutting, cracking, and chipping.Thin coating permits use in confined areas.Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications.Internal flanges provide solid, twist-resistant shaft anchor.Premium chrome plated for smooth feel and corrosion resistance.Meets or exceeds applicable ASME ANSI specifications.Handle end is also color coded for easy identification.Cushion-Grip handle allows for greater torque and comfort.Tip-Ident quickly identifies nut driver and siz
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.