The Lab Zone

Florida, United States

We, hailing from Florida, US, are one of the nonpareil Exporters and Suppliers of the Final Polish across the world. Because of our strong alliances with the reputed Final Polish Manufacturers, we are able to proffer the quality-incarnate Final Polish in small as well as bulk quantities. Moreover, we dole out the Final Polish in the packaging as recommended by the clients at highly rational prices.

 

Key Benefits

• Creates a super high-gloss shine
• Easy to apply by hand or machine
• Silicone-free formula
• Body shop safe

Instructions

• Shake well before use.
• Can be applied by hand but use of dual-action polisher provides best results!
• When applying by hand, use an Applicator. Rub in polish until residue is nearly gone. Buff off remaining residue with a dry microfiber polishing towel. Repeat until final results are achieved.
• When applying using dual-action polisher, use a Foam Pad.
• Apply at 1/2 to 3/4 speed with moderate pad pressure as necessary to achieve results. Wipe off any remaining residue with a dry microfiber polishing towel.
• Lock-in the polished finish with a quality wax or sealant.

Note : Do not use in direct sunlight. Using a cleaner/wax is not recommended as it may dull the final finish offered by Final Polish.

Recommended Surfaces

• New painted surfaces
• Like-new painted surfaces

Though there are numerous Exporters and Suppliers dealing in the variety of Scratch Removers, we have reserved a special place in the markets of US and rest of the world by providing the top-notch products at the incredibly low prices. Devoted towards quality, the Scratch Removers are meticulously screened and packaged before further offering to the clients. Also, we have ample stock to accomplish the bulk order requirements in timely manner.

 

Key Benefits

• Silicone-Free

• Safely removes heavy swirl marks, scratches, light orange peel and oxidation
• Removes damage from birds and water spots

Instructions

• Shake well before using.
• When using by hand, use the foam Applicator.
• When using a dual-action polisher, use foam pad. Set RPMs between medium and high, using a slow back and forth, up and down motion until polish turns clear.
• When using a circular polisher, equip machine with a wool cutting pad or a foam pad. Set RPMs between 1200-1500 and use slow back and forth motions until polish turns clear.
• Remove residue using a clean, dry microfiber polishing towel.

Note : Professional experience is highly recommended when applying with circular and dual-action polishers.

Recommended Surfaces : Paint surfaces

Situated in Florida, we have gained recognition across the globe by exporting and supplying the Marine Fine Cut Polish. To make this Polish accessible to all, we have slashed its prices to an affordable extent. Also, we endeavor to meet the best expectations of clients by assuring them the delivery of a quality product within a specified time. And, we are accoutered to cater the bulk requests as well.

 

Key Benefits

• Removes fine scratches, light oxidation and light chalk
• Formulated for painted and unpainted gelcoats
• Can be applied in direct sunlight

Instructions

• Shake Fine Cut Polish well before using.
• For best results, apply with a gelcoat wool or foam pad on a dual-action or circular polishing machine. The wool pad is recommended.
• Apply a small amount of product over a 2' by 2' area.
• Set circular machine between 1200 and 1800 RPM.
• Move slowly back and forth using medium pressure.
• Reduce pressure as product begins to haze.
• Buff off dry residue by hand using a dry microfiber cloth such as the Microfiber Polishing Towel. Note: Avoid contact with rubber or plastic moldings.

Recommended Surfaces

• Painted gelcoat surfaces
• Non-painted gelcoat surfaces

We are bracketed among the eminent Exporters and Suppliers of Marine Heavy Cut Compound from Florida, US. We have maintained a good level of inventory so as to cater the bulk requirements for Marine Heavy Cut Compound in a timely manner. After checking for impeccable formulation and packaging, we dole out the Marine Heavy Cut Compound across the worldwide destinations at the market-leading prices.

 

Key Benefits

• Removes heavy oxidation, scratches and chalk
• Formulated for painted and unpainted gelcoat surfaces
• Can be applied in direct sunlight

Instructions

• Shake Heavy Cut Compound well before use.
• For best results apply using the wool pad on a circular machine polisher.
• Apply small amount of Heavy Cut Compound over a 2' by 2' area.
• Set circular machine between 1200 and 1800 RPM.
• Move slowly back and forth using medium pressure.
• Reduce pressure as product begins to haze.
• Buff off dry residue by hand using a dry microfiber cloth such as the Microfiber Polishing Towel. Note: Avoid contact with rubber or plastic moldings.

Recommended Surfaces

• Painted gelcoat surfaces
• Non-painted surfaces
• Fiberglass surfaces

Sited in Florida, US, we are reckoned amid the preeminent Exporters and Suppliers of the Metal Polish world-over. Our experts perform the extensive quality control tests while the procurement of the Metal Polish to ensure complete customer satisfaction. Moreover, we are backed with the capacious inventory, and advance transit facilities to ensure even the bulk delivery of Metal Polish in a timely manner. Also, our prices are reasonable.

 

Key Benefits

• Quickly removes oxidation
• Restores a brilliant shine
• Easy application and removal

Instructions

• Shake well before use.
• For hand application, place a dime size amount to a clean, dry applicator.
• Work in a small area at a time, approximately 6" by 6" area.
• Rub lightly until area becomes dark with residue.
• Wipe residue off using a clean, dry soft microfiber towel.
• For machine application, apply small amount of Metal Polish to a clean dry polishing pad.
• Start machine slow to reduce product sling as it will stain plastic, vinyl, and rubber if allowed to dry on surface.
• As pad becomes saturated with polish, reduce the amount of product.
• Wipe residue off using a clean, dry soft microfiber towel.
• Depending on conditions, a second application may be required.

Note : For severely oxidized surfaces, use Metal Restore to remove oxidization residue and greatly reduce polishing time. Apply Metal Sealant for long lasting protection.

Recommended Surfaces

• Uncoated aluminum surfaces
• Stainless steel surfaces
• Wheels
• Fuel tanks
• Diamond plate
• Unpainted trailers
• Trim

From Florida, US, we are the Chrome Polish Exporter and Supplier trusted by the global audience. That’s because of the high quality, effective performance, and stable shelf life of the Chrome Polish offered by us. Our Chrome Polish is procured, packaged, and distributed under the vigil supervision of our quality-centric team so as to ensure untainted product to the clients. Further, our levelheaded prices & timely deliveries have elevated our stature.

 

Key Benefits

• Works on all durable chrome wheels, trim & parts
• Removes contamination from environmental elements
• Easy-to-use formula
• Even works on mirrors

Instructions

• Always work in a shaded area and on a cool surface.
• Wash and dry your vehicle or chrome parts to remove any loose dirt and grime.
• Apply Chrome Polish to a quality microfiber applicator such as the Microfiber Detailing Applicator and work in a small area, using a back and forth motion with light pressure.
• Once area is polished, wipe clean with a quality microfiber such as the Microfiber Polishing Towel to reveal a brilliant shine.
• Protect freshly polished chrome with Chrome Sealant. Note: Chrome finished plastic is not durable chrome. You can wash and wax it, but it cannot be safely polished.

Recommended Surfaces

• Chrome wheels
• Chrome bumpers
• Chrome trim & accessories

Our name figures amid the A-listed Exporters and Suppliers of the Swirl Mark Removers in Florida. The offered Swirl Mark Removers meet the highest norms of quality, effectiveness, and reliability, courtesy their accurate formulation at the vendor’s end. Further, these Removers are packaged effectively in the required quantity packaging, and doled out across the globe at marginal prices.

 

Key Benefits

• Quickly & easily removes swirl marks
• Produces a high gloss finish
• No cover up! Contains no fillers, wax or silicone
• Safe on all paint finishes

Instructions

• Shake well before using.
• Make sure surface is clean, dry and free of contaminants.
• Optimum performance is achieved by using either a rotary or dual-action polisher equipped with a clean, dry wool or foam pad.
• Apply a small amount of Swirl Mark Remover to the surface or the pad.
• Spread product before starting machine to eliminate product sling.
• Start machine, at 1200-1700 RPM for rotary and 5000-6000 for dual-action, using medium pressure while working in a 2' by 2' area.
• Move machine slowly back and forth, keeping pad flat to the surface at all times.
• Reduce pressure as product begins to dry.
• Wipe remaining residue with a clean microfiber towel.

Note : Avoid contact with rubber or plastic moldings. Meets VOC regulations in all states.

Recommended Surfaces

• Clear coated surfaces
• Painted surfaces

Based in Florida, US, we are entrusted with the task of exporting and supplying the Paint Cleanser across the lengths and breadths of the country and abroad. Our adroit team sources these Paint Cleansers from the trusted vendors; hence, their quality is assured to be superlative. Moreover, we have a well-maintained inventory to cater the diverse client orders in timely manner. Also, our prices are very reasonable.

 

Key Benefits

• Removes deep down grime
• Prepares finish for waxing or sealing
• Easy-to-use formula
• Safe on all finishes

Instructions

• Shake Paint Cleanser well before use.
• Make sure painted surface is cool, clean, and dry.
• Working in a 2' square area, apply a small amount of product to a clean, dry terry cloth applicator and gently rub onto the surface.
• Using a clean, dry terry cloth or microfiber towel buff until all residue is gone.
• Works great with a random orbital polisher, dual action polisher, or rotary buffer.
• For best results, follow with Paint Protection. Note: Contains refined mineral spirits. Protect from extreme heat and freezing.

Recommended Surfaces

• Clear coated surfaces
• Painted surfaces

Available for Private label or 55 gal drum Description Quickly and easily removes oxidization and restores a brilliant shine to dulled uncoated aluminum and stainless steel! Metal Polish easily and quickly removes oxidization and restores a brilliant shine to dulled uncoated aluminum and stainless steel. Works great on wheels, fuel tanks, diamond plate, unpainted trailers and trim. Can be applied by hand or by machine. This ammonia-free formula wipes on and off with little effort. For severely oxidized surfaces, use Aluminum Restore to remove oxidization residue and greatly reduce polishing time. Apply Aluminum Sealant for a long lasting protection! Key BenefitsQuickly removes oxidation Restores a brilliant shine Easy application and removal InstructionsShake well before use. For hand application, place a dime size amount to a clean, dry applicator.Work in a small area at a time, approximately 6" by 6" area.Rub lightly until area becomes dark with residue.Wipe residue off using a clean, dry soft microfiber towel.For machine application, apply small amount of Metal Polish Polish to a clean dry polishing pad .Start machine slow to reduce product sling as it will stain plastic, vinyl, and rubber if allowed to dry on surface.As pad becomes saturated with polish, reduce the amount of product.Wipe residue off using a clean, dry soft microfiber towel.Depending on conditions, a second application may be required. Recommended SurfacesUncoated aluminum surfacesStainless steel surfacesWheelsFuel tanksDiamond plateUnpainted trailersTrim

Available for Private label or 55 gal drum DescriptionRemove swirl marks and produce a high gloss shine in one easy step with Swirl Mark Remover! Swirl Mark Remover doesn't fill or cover up scratches with wax or silicone. It actually removes them and produces a high gloss finish. Formulated to be used with a machine polisher, Swirl Mark Remover is able to renew finishes to their original luster! Follow with Paint Sealant to lock in the shine and protect paint from environmental contaminants. Key BenefitsQuickly & easily removes swirl marks Produces a high gloss finish No cover up! Contains no fillers, wax or siliconeSafe on all paint finishes InstructionsShake well before using. Make sure surface is clean, dry and free of contaminants.Optimum performance is achieved by using either a rotary or dual-action polisher equipped with a clean, dry wool or foam pad. Apply a small amount of Swirl Mark Remover to the surface or the pad. Spread product before starting machine to eliminate product sling. Start machine at 1200-1700 RPM for rotary and 5000-6000 for dual-action, using medium pressure while working in a 2' by 2' area.Move machine slowly back and forth, keeping pad flat to the surface at all times.Reduce pressure as product begins to dry.Wipe remaining residue with a clean microfiber towel. Note: Avoid contact with rubber or plastic moldings. Meets VOC regulations in all states. Recommended SurfacesClear coated surfaces Painted surfaces

Available for Private label or 55 gal drum Description Make your chrome surfaces reflective and brilliant with Chrome Polish! Easy-to-use formula, Chrome Polish is formulated to work extraordinarily well on all chrome to remove tarnish, light rust, brake dust and other environmental elements that keep your chrome from looking it's best. Works great on wheels, trim, mirrors, chrome bumpers and all chrome parts. Chrome Polish will give your chrome that sharp, crisp, clean look on your car, truck, motorcycle or SUV. Use Chrome Polish on your wheels, trim, mirrors, chrome bumpers and all of your precious chrome parts. Chrome Polish offers exceptional results and ease of use! Key BenefitsWorks on all durable chrome wheels, trim & parts Removes contamination from environmental elements Easy-to-use formulaEven works on mirrors InstructionsAlways work in a shaded area and on a cool surface. Wash and dry your vehicle or chrome parts to remove any loose dirt and grime.Apply Chrome Polish to a quality microfiber applicator such as the Detailing Applicator and work in a small area, using a back and forth motion with light pressure. Once area is polished, wipe clean with a quality microfiber such as the Microfiber Polishing Towel to reveal a brilliant shine.Protect freshly polished chrome with Aluminum and Chrome Sealant. Note: Chrome finished plastic is not durable chrome. You can wash and wax it, but it can not be safely polished.Recommended SurfacesChrome wheels Chrome bumpers Chrome trim & accessories