Our Complete range of products are Rockwell Sonicrafter Oscillating Tool Kit, Fein Multi Master Top Oscillating Tool Kit, DuraSpin Collated Screwdriver, Quik Drive Auto Feed Screwdriver Kit and Heavy-Duty Spade Handle Drill.
High torque motor has the versatility to do a wide variety of jobs. Added torque provides plenty of power for composite decks, cement board, or applications where dense engineered materials are needed. Ideal for applications where drill point screws are used to cut through heavy steel. Applications include crating, decking, drywall, pallets, sheathing, sub-flooring, underlayment, floor sheathing, upholstery, metal to metal, wood to heavy steel, wood to wood. Features include corner-fit feed system, tool-free screw length adjustment, precise depth-of-drive adjustment with depth lock, quick slide button bit change, variable speed trigger with lock and reverse, belt hook right or left handed adjustable. Fastener capacity: 50 screws per collated strip. 2.75" W x 9.2" H x 16.75" L. Tool weight: 4.75 lb (pound). Comes complete with two drive bits, drywall and wood nosepiece and storage bag.
Makita-powered system for driving Quik Drive collated screw strips into drywall, flooring, decks, etc. Drives 1-14" to 3" screws rapidly to save time and energy. Narrow profile allows easy driving in corners and other tight spots. Kit includes Makita screw gun, 6.5A, 2500 RPM screw gun with Quik Drive attachment, bits, 22" extension bar for easier driving in floors and ceilings, screw strip quiver, and hard plastic storage case.
12" Heavy-Duty Spade Handle Drill Dewalt UNSPSC: 27112703 9A 120V motor provides enough power for any job site application. Variable speed reversing (VSR) switch avoids air bubbles when mixing mud and offers greater control when drilling. 7.5 lb. soft-grip handle provides superior comfort and ergonomics. 2-position rear spade handle and 3-position side handle gives greater control for all drilling and mixing applications. 0 to 550 RPM provides increased torque for drilling and mud mixing.
VSR Electric Drilleversible for backing out screws and jammed drill bits. Triple gear reduction for greater torque. Lock-on switch for continuous use. Ball-thrust and sleeve bearings. Side handle for greater control. Includes chuck key and 360 deg. side handle. 0-750 RPM, 7.0A. 6' cord. Full 2 year home-use warranty.
Powerful 8.0 A motor, 0 to 850 RPM, variable speed control. Drill has ergonomic tactile grip and 2-finger trigger for user comfort and balance. Other features include heavy-duty keyed chuck, all metal gear case and diaphragm, helical-cut steel gears (heat-treated for maximum durabilty), 360 deg locking side handle, and 8', 3-wire rubber cord. Includes side handle and chuck key with holder.
Robust and powerful 3.0A (amp) motor undertakes the toughest applications. Oscillation angle of 3.2 deg (degrees) delivers faster speed of cut. Quick Lock accessory change system with a magnetic accessory interface makes switching between the broad range of Multi-Max accessories quick and easy. Includes: MM40 tool, MM480 flush cutting blade, MM482 flush cutting blade, MM450 wooddrywall blade, MM435 drywall jab saw, MM502 grout blade, MM610 flexible scraper, MM14 hook and loop pad, 29 sanding sheets (15 sheets for wood and 14 sheets for paint), and a hard case for storage.
High performance, universal system for interior construction and renovation with accessories for a wide range of applications. Self-supporting motor with vibration decoupling for outstanding vibration and noise reduction. Powerful 350W (watt) high-performance motor for optimal cutting speeds and maximum work progress. Highest quality and stability with metal gear case and consistent use of ball or needle bearings. Convenient QuickIN rapid-clamping system. Electronic speed control with tacho generator for constant speed, even under load. Integrated interface for mounting additional system accessories. Softgrip zone provides optimal handling. StarlockPlus tool mount with outstanding torque transfer - fits all Starlock and StarlockPlus accessories. Includes Fein MultiMaster FMM 350 QSL, backing pad, 3 of each (grits 60, 80, 120, 180) sanding sheets, 1-34 In. (inch) (type 152) universal E-Cut saw blade, nylon tool bag.
A multipurpose, versatile tool for sawing, scraping, rasping, cutting, grinding, and polishing. Works on wood, plaster, paint, metal, and stone. Features include no recoil when sanding in corners and along edges, high cutting performance right into the corner, minimum operating noise, clean and straight cuts, can be plunged at any point into the workpiece, cutting depth automatically determined, low dust formation, and no sparks when sawing sheet metal. 1.8A, 21, 000 OPM. Kit includes: Hex key, triangular sanding pad, 2 sanding sheets, end cut blade, scraper blade, semicircle saw blade. Compatible with Rockwell and Imperial Blade oscillating accessories.
Rockwell Sonicrafter Oscillating Tool Kit WorxRockwell SoniCrafter F30 with Hyperlock tool-free blade change system provides 1 ton of clamping force to prevent blade slippage. Universal Fit System accepts other brand accessories without the need for an adapter. Higher oscillation angle of 4 deg (degree) provides accelerated speed of cut. Constant speed control for maintaining speed-of-cut under load. Vibrafree counterweight offsets vibration for smooth cutting. Variable speed dial for precision control. Includes: sanding pad (RW8938), 26 sanding sheets (RW9145), (3) 1-18" standard wood end cut blade (RW8933), rigid scraper blade (RW8921), hard carrying case.
Fein Multi Master Top Oscillating Tool Kit Fein Power Tools High performance, universal system for interior construction and renovation with comprehensive accessories for versatility. Self-supporting motor with vibration decoupling for outstanding vibration and noise reduction. Very powerful 350W (watt) high-performance motor for optimal cutting speeds and maximum work progress. Highest quality and stability with metal gear case and consistent use of ball or needle bearings. Convenient QuickIN rapid-clamping system. Electronic speed control with tacho generator for constant speed, even under load. Integrated interface for mounting additional system accessories. Softgrip zone provides optimal handling. StarlockPlus tool mount with outstanding torque transfer - fits all Starlock and StarlockPlus accessories. Includes Fein MultiMaster FMM350 QSL, backing pad, 3 of each sanding sheets (grits 60, 80, 120, 180), perforated backing pad, 3 of each sanding sheets (grits 60, 80, 120, 180) perforated, 4-12 In. (inch) perforated sanding disc, 2 of each 4-12 In. perforated sanding sheets, dust extraction assembly, rigid scraper blade, 1-38 In. (type 160) E-Cut long-life saw blade, 1-34 In. (type 152) universal E-Cut saw blade, 2-916 In. (type 161) E-Cut long-life saw blade, HSS segment saw blade, carbide segment saw blade, triangular carbide rasp, tool case