Other Products / Services #4992649

The Type 51SS regulator is designed for service with a variety of corrosive gases and environments and comply with NACE MR-01-75. Special construction includes 316 stainless steel housing and filter assemblies, with fluorocarbon elastomers used for the control diaphragm and the supply valve. These corrosion resistant materials are compatible with sour gas and for use in off-shore environments. Typical applications include petrochemical processing, chemical plants, food processing and paperpulp mills. This ruggedly built regulator operates in pressure ranges up to 150 psig (10.3 BAR). The Type 51SSFR and Type 51SSAR Regulators and the Type 51SSF and Type 51SSAF filter assemblies have built-in dripwells which trap water, oil and other contaminants. The contaminants are easily flushed out of the dripwell via a convenient manual or automatic drain valve. The 40-48 Micron Filter is constructed of sintered 316 stainless steel, and is easily removed. The Type 51SS products can be through-panel mounted with the mounting nut supplied (regulators only), bracket-mounted using the optional bracket (regulators only), or pipe mounted by its ports (regulators and filters). The regulators and filter assemblies comply with NACE material requirement #MR-01-75 for sulfide stress cracking resistant metallic material for oil field equipment.

Type 92 Subminiature Regulators from Bellofram PCD are compact, low-cost units which operate in pressure ranges up to 100 psi, with a maximum supply pressure of 150 psi. It provides dependable reliability and accuracy for low flow or dead end applications. With the new Type 92, Marsh Bellofram has created a subminiature regulator with a true rolling diaphragm design. Most subminiature regulators utilize a flat diaphragm. In this small of a regulator, such a design causes excessive droop and low stability. By utilizing a larger diameter rolling diaphragm, the Type 92 regulator offers a more sensitive regulator with excellent stability and significantly less droop. The Type 92 subminiature regulator is available with a corrosion resistant anodized aluminum body and bonnet. It also comes standard with a fluorocarbon diaphragm.

Type 51 High-Performance Low-Cost Precision Air Regulator offers a high-performance in a compact, low-cost package, offering output pressure ranges to 100 psig; 6.9 BAR (120 psig; 8.3 BAR in T-51FR Corrosive Tec & T51FRWT). Maximum supply pressure is 250 psi (17.3 BAR). Materials of construction for standard Type 51 Series Regulators: Die cast aluminum for the body and dripwell; glass-reinforced thermoplastic polyester for the bonnet; acetal resin for the internals; BUNA-N for the diaphragm, gaskets and O-ring, fluorocarbon for the pintle seat, and aluminum for the drain valve (plated steel handle). Materials of construction for Corrosive Tec Type 51FRCT: Aluminum alloy bonnet, body, and filter bowl, 316 stainless steel internals, Inconel alloy range spring, nitrile diaphragm (fluorocarbon optional), 316 stainless steel valve assemblies, and finished with epoxy paint. All metallic parts for this unit conform to NACE material requirements #MR-01-75. These regulators are available standard (Type 51R) or as filter-regulators (Type 51FR, Type 51FRCT & Type 51FRWT) and are even available with an automatic drain, for automated flushing out of contaminants (Type 51 AFR). These versatile regulators provide excellent regulation for a wide range of applications, including pneumatic instruments, controllers, chucks, and actuators. They can be through-panel mounted