Meriam Process Technologies

United States

Pressure Sensor Modules from Meriam Process Technologies are available in a several types and ranges to provide the ultimate in flexibility and convenience for portable calibration standards. Calibration coefficients for all modules are stored in non-volatile sensor module memory. This means any pressure module can be used in any Meriam MFT without manual programming of coefficients. Engineering units, including PSI, centimeters or inches of H2O (at 4C, 20C, or 60F), kgcm2, kPa, mBars, Bars, millimeters, inches of Hg (at 0C ref. temp) and ozin2 are all selectable from the MFT keypad.

The RIO4000 is the RTD measure and simulate module for the Meriam MFT 4000 Series Multi-Function Tester. The module accurately measures or simulates the resistance of 22 different RTD sensor types with nominal resistance to 4000 ohms. 2-, 3-, and 4-wire RTD Measurement for various RTD types; platinum, copper, nickel or iron. The module can simulate temperature to all conventional or smart temperature transmitters and signal conditioners.

The 1126P-2 is designed for portable applications. Typical examples are periodic measurements of the pressure drop across filters, balancing of flow rates in heating and cooling systems and checking of back flow prevention devices. When used as a flow measuring device, the instrument normally comes with a 0-100% square root scale. With all flow elements designed for the same differential, multiplying the scale reading by the primary elements full flow design value gives readings directly in flow units. Scales in flow inches of H20, PSI and metric units are also available.

The Meriam PIT5000 is the premier instrument for conducting and documenting pipeline hydrostatic pressure tests. This device replaces your bulky and fragile dead weight pressure testers, pressure chart recorders, and temperature chart recorders with a rugged all-in-one solution.

Meriams M2 Series Smart Manometers bring high precision and value to handheld, digital manometer users. The M2 features NIST traceable accuracy of 0.025 % of F.S., independent of temperature effect, at the lowest prices available. Pressure ranges from 10 H2O F.S. to 3000 PSIG F.S. are available. M2 pressure sensors are available to measure gauge, compound, differential, absolute or vacuum pressure. The display can read out in any of eleven pressure units or can be linearly scaled for special user units. Differential models offer a square root flow function to display flow rate in user defined units. An adjustable damping feature minimizes the effects of pulsating pressures. A MinMax function captures the extremes of pulsating or varying pressure signals and a Hold function can freeze the display at any point of interest. Auto Record documents up to 240 readings for future recall.

Meriams M204 Smart Manometer brings high precision and value to handheld, digital manometer users. The M204 features NIST traceable accuracy of +- 0.05% (0.025% optional) of Full Scale, independent of temperature effect, at the lowest prices available. Pressure ranges from 10 H2O F.S. to 3000 PSIG F.S. are available.

The MGF16BN digital pressure gauge is designed to handle the demands of pressure measurement. Pressure ranges are available to 5 000 PSIG at standard accuracy of 0.25 % of full scale or higher accuracy of 0.1 % of full scale. The display is a 4 digit LCD with 0.5 high numerals and a lower alphanumeric display for engineering units to aid in set up. Each gauge includes up to 15 selectable engineering units depending on the sensor range. The gauge is powered by two AA alkaline batteries.

Meriam Process Technologies Accutube brand multi-port averaging pitot tubes are the smart choice when ease of installation, cost-effective operation and accurate flow measurement is a priority. Four standard models include Inline, Insertion, Flanged and Wet Tap. Accutubes are designed to handle your tough applications and are available in Steel Steel and Brass.

The MFT 4000 Digital Calibrator is a base unit for pressure calibration work with selected NIST traceable sensor modules & integral voltagecurrent meter. The MFT 4010 Digital Calibrator with HART is a base unit for modules and full device specific HART communications. Quick Cal displays HART PV and AO along with MFTs NIST traceable measurements. User can identify needed trim(s) and access the trim function(s) from same display. Smart Trim allows selection of analog or digital trims without navigating through menu trees. Documenting included. Documenting memory stores up to 200 HART configuration files and over 100 calibration results (as-found & as-left data [up to 21 points each], timedate info, tag). Communicate with PC via DB-9 connector.

The MFC5150 HART Communicator is the latest addition to Meriams product line of hand-held calibrators and field communicators. Available in ATEX (intrinsically safe) and Non-ATEX models, the MFC5150 directly reads Device Descriptions without any translations or subscriptions, enabling communication to take place with any registered or unregistered HART device. This ensures your HART transmitter will connect, regardless of brand or model. The MFC5150 is built on the SDC-625 infrastructure and runs Windows CE. With a 1GHz processor and an 4GBMicro SD card, this HART communicator is ideal for all of your data storage needs. The 4.3 inch touchscreen provides excellent anti-glare viewing, allowing for comfortable mobile use in darkness or in bright sunlight. All functions are easily navigated via the full QWERTY keyboard and intuitive icons similar to that of a smart phone. The handheld HART device also features hyperlink menu paths, teachable device specific shortcuts, instant on, multiple languages, help context, videos and TAB access to panes just like on a computer.