Molding Machines #5336382

Features :

• Special design for PET Gallon Bottles up to 6 Gallon.
• Produce wide mouth bottle up to 25 liters with neck size up to 200mm.
• Uses infrared reheat units to achieve uniform heating throughout the wall of preform.
• Adopts special designed preform heating system to ensure the optimal heating effect for 740g thick-preform.
• Special designed fan-cooling system in the heating channels to keep the oven with constant temperature and ensure the preform can be heated completely.
• Water cooling system ensures the quality of preform neck.
• Up to 90 bottles/hour using one-cavity mold for 5-gallon bottle.
• Use advanced PLC control system with counting function and time-control precision to 0.01 seconds and a user-friendly panel.
• Equipped with specially designed air storage units.
• Simple installation and startup adjustments.

Technical Description :

• This is a new generation blowing machine, which can reduce the usage cost and accelerate the speed for your factory.stretch-blow-equipThis new generation blowing machine increases the capacity (4 cavity 7200 bottles per hour) and reduces the power consumption. Compared with the traditional blowing machine (in which the preform is moved step by step), this system has the preform continuously running around the heating oven, this will make sure that each preform is heated more evenly, and reduce the reject ratio of finished products.
• More importantly there is a more reliable structure because it breaks through the traditional design idea for the blow molding part, it adopts the mechanical cam control to integrate the 4 movements into 1 movement. The equipment operates fully on servo motors electrical control. There is no need for low pressure air from the compressor, which greatly simplify the machine movement and reduce the production failure rate.
• stretch-frameBecause of our experience in stretch blowing, we have created a smart system that will know the end user’s demands best. Thanks to our working experience in this industry, we have collected feedback from hundreds of end users, this helps us to solve problems before they happen. We have turned the complains into the smart design. For example, there are position fix grooves on the frame to make the installation very quick and efficient. If the position is not right, it can not be assembled, there is no need take time to measure, the quick changing bottle mold only needs 30 minutes or less to change.
• Materials are important for the performance of our equipment. This is why we have adopted the aluminum alloy material. There is less friction, it is more clean, and the frame uses double the thickness of other manufacturers to allow it to have longer and better service performance.

Technical Description :

• This is a new generation blowing machine, which can reduce the usage cost and accelerate the speed for your factory. stretch-blow-equip This new generation blowing machine increases the capacity (4 cavity 7200 bottles per hour) and reduces the power consumption. Compared with the traditional blowing machine (in which the preform is moved step by step), this system has the preform continuously running around the heating oven, this will make sure that each preform is heated more evenly, and reduce the reject ratio of finished products.
• More importantly there is a more reliable structure because it breaks through the traditional design idea for the blow molding part, it adopts the mechanical cam control to integrate the 4 movements into 1 movement. The equipment operates fully on servo motors electrical control. There is no need for low pressure air from the compressor, which greatly simplify the machine movement and reduce the production failure rate.
• stretch-frameBecause of our experience in stretch blowing, we have created a smart system that will know the end user’s demands best. Thanks to our working experience in this industry, we have collected feedback from hundreds of end users, this helps us to solve problems before they happen. We have turned the complains into the smart design. For example, there are position fix grooves on the frame to make the installation very quick and efficient. If the position is not right, it can not be assembled, there is no need take time to measure, the quick changing bottle mold only needs 30 minutes or less to change.
• Materials are important for the performance of our equipment. This is why we have adopted the aluminum alloy material. There is less friction, it is more clean, and the frame uses double the thickness of other manufacturers to allow it to have longer and better service performance.

Auxiliary equipments included :

• Air compressor is the air source for PET stretch blow molding machine, carrying out the process of compressing air from atmospheric to the required pressure
• Air dryer is to remove the moisture from the compressed air and lower temperature of the compressed air in the heat exchanger
• Air filter is to clear up the impurities out of the compressed air, like carbon-hydrogen, tiny dust and solid particles.
• Air tank is to receive and supply air for the machine as storage.