My ExportersIndia

For Buyer

For Seller

For Help

NF
Write a Review

Our Products

  1. Electronic Components 3 Products available
  2. Sewing Accessories 3 Products available
  3. Industrial & Engineering Products

    1 Products available
  4. Hydraulic & Pneumatic Tools

    1 Products available
  5. Industrial Air Conditioner & Devices

    1 Products available
  6. Domestic Fans, AC & Coolers

    1 Products available
  7. PVC, PP & Plastic Products

    1 Products available
  8. Others Products 2 Products available

Our Products

We are leaders in the market for providing best range of Air Jets and Ring Blade Air Wipe Blowoff Systems

Air Jets

Product Overview Air Jets Superior designed Air Jets reduce compressed air consumption and noise levels while maintaining laminar flow for strong blowoff. Air Jets entrain large volumes of surrounding air through the Jet (similar to Air Amplifiers) and are more efficient than Air Nozzles. They cover a larger blowoff target than a Nozzle. The larger the jet, greater the efficiency for flow amplification and significant energy savings can be achieved. It is important to recognize that amplification Jets are flow amplifiers and not force amplifiers. However the more air consumed the greater the force produced. The most important reason to use Air Jets is safety. All Nex Flow Air Jets meet OSHA standard CFR 1910.242(b) for dead end pressure. Noise levels are dramatically reduced with Air Jets in addition to lower energy use.
View Complete Details

Ring Blade Air Wipe Blowoff Systems

Product Overview: Nex Flow Ring Blade Air Wipe The Nex Flows Ring Blade Air Wipe produces an even 360 degree blow off around the part, light in weight and compact. Easy to install and maintain and allows removal of a continuous piece. Reduced compressed air use for energy savings plus lower noise levels. Maintenance free with output easily controlled. Designed as two pieces hinged together to open and close around the part. Instant on-off with no moving parts The 360 Degree Air Wipe System produces a laminar flow of air along its 360 angle using the Coanda effect which entrains a large volume of air from the surrounding area along with the small amount of compressed air from the Air Wipe System to produce an output flow up to 30 times.
View Complete Details

Air Amplifiers

Product Overview Air Amplifier Nex Flow Air amplifiers are a simple, inexpensive devices with virtually no maintenance that can convey fumes, smoke, lightweight materials and move a high volume of air for cooling, blowoff and drying applications. They use the coanda effect which entrains a large amount of surrounding air using only a small amount of compressed air. The effect is an amplification of up to 17 times the airflow or more (depending on the size) with reduced noise levels.
View Complete Details

Air Knives

Product Overview Air Knives Air Knife Systems utilize compressed air for industrial applications. The curtain like airflow of the Air Knife is the most efficient way to dry, clean, removes excess oils and liquids, dust, and cool. The Air Knife is used for Printing and labeling, part or component cooling, Converting and Packaging, Films and Laminating, Form and Fill, Sheet and Web Materials, Bag openingfill operations, Conveying or hold down, Food Processing, Paint preparation and drying.
View Complete Details

Air Nozzles

Product Overview Air Nozzles Nex Flow air amplifying nozzles produce air flows up to 25 times the compressed air consumed. Different nozzles have different outlet sizes and the more air used, the greater the force produced. Noise reduction up to 10 dBA is typical as well as reduced air consumption when compared to open air jets and vortex tubes. The most important reasons to use air nozzles or jets is safety All Nex Flow Air Nozzles meet OSHA standard CFR 1910.242(b) for dead end pressure. Noise levels are dramatically lower with air nozzles in addition to lower energy use. Nex Flow nozzles are designed to fit into small spaces. Nex Flow Air Nozzles reduce compressed air energy, and provide strong laminar flow for blowoff applications.
View Complete Details

Safety Air Guns

Product Overview: Safety Air Guns Nex Flow Safety Air Guns are durable, safe and comfortable to use incorporating our efficient air nozzles and air jets to produce high output air and laminar flow while minimizing compressed air use and noise levels. All Nex Flow Safety Air Guns with Nex Flow Nozzles meet OSHA standard CFR 1910.242(b) for dead end pressure. Noise levels are dramatically lower in addition to lower energy use. Nex Flow Safety Air Guns are durable, safe and comfortable to use incorporating our efficient air nozzles to produce high output air and laminar flow while minimizing compressed air use and noise levels.
View Complete Details

Flat Jet Nozzles

Product Overview Flat Jet Nozzles Model 47011 Air Edger Flat Jet is an extremely efficient flat jet air nozzle designed to provide a powerful stream of high velocity laminar flow and high force for blow off and cooling where air knives may not be enough. Available in cast zinc and 316L stainless steel for high temperature and highly corrosive environments. When bench tested against several other flat jets, even those with special designed holes or shims, the Air Edger Flat Jet outperformed them all despite whatever claims others may make. Air consumption and noise levels are minimized with its special design and configuration. The Nex Flow Air Edger Flat Jet is available with various size gaps all set by a flat shim. Three standard shim sizes are available .004 (.10 mm), .008 (.2mm) and .020 (.51 mm). One, two or more shims can be stacked for a larger gap and greater force.
View Complete Details

Tool Cooling System

Product Overview Tool Cooling System Frigid-X Tool Cooling System for dry machining applications replaces polluting and often toxic mist systems to improve dry machining operations. No mess, no residue and low in cost.
View Complete Details

Mini Coolers

Product Overview: Mini Spot Cooler The Mini Spot Cooler is a low cost and maintenance free system which utilizes a vortex tube to produce cold air at one end. It is quiet and compact. Designed for small parts, the Frigid-X Mini Spot Cooler produces a stream of 15 to 20 degree F (minus 9.5 to 7 degree C) of cold air to prevent heat buildup depending in inlet air temperature. It can improve tolerances in machining of small critical parts and increase production rates. Cold air is directed using the flexible tubing. A magnetic base is standard for portability and easy mounting of the mini spot cooler.
View Complete Details

Vortex Tubes

Product Overview Vortex Tubes Welded Stainless Steel Construction with NO Plastic Parts. Produce cold air from -50F for spot cooling or hot air to 230F from ordinary Compressed Air with no moving parts! Nex Flow Vortex Tubes are constructed of WELDED Stainless Steel and use a Generator and Valve made of BRASS and sealed with Viton O-rings to allow their use in the widest range of industrial environments. The unique design and quality of materials used in Nex Flow Vortex Tubes will deliver years of maintenance-free operation. Careful detail to holding critical tolerances, only precision machining can accomplish produces a Vortex Tube with the highest rated Cooling ( BTUHr ) in the industry and in stock ! Nex Flow Vortex Tubes are Dimensionally interchangeable with all other manufactures. Youll find many other cheaper Vortex Tubes on the market. Others use either BrazedStainless construction or AluminumPress Fit, both with PLASTIC Generators and standard Buna N O-rings. We invite you to compare the overall value of the Nex Flow Vortex Tube.
View Complete Details

STANDARD FIXED AIR AMPLIFIERS

The Fixed Standard Air Amplifier from Nex Flow is die cast for rugged use. The gap can be adjusted by adding shims, five sizes are available. It is easy to mount and maintain reducing both compressed air consumption and noise levels. It is quiet, and can amplify flows up to 16 times their input air consumption rate
View Complete Details

ADJUSTABLE AIR AMPLIFIERS

The adjustable Air Amplifier is anodized aluminum or Stainless Steel for high temperature or food applications. The customer can set the gap and lock it in place using a lock ring. They are used for a variety of applications. Adjustable Air Amplifiers take energy from a small volume of compressed air to produce high velocity, high volume, low pressure output airflow. It is quiet, efficient and can amplify flows up to 17 times the input air consumption rate.
View Complete Details

AIR MAG AIR NOZZLES

The Nex Flow Air Mag Air Nozzle is an engineered nozzle with a unique patent pending design to assist in focusing the compressed air from the supply line and entrained air from the surroundings to a more sharp laminar flow of air with the highest force per SCFM on the market. This both reduces compressed air energy use and noise levels as compared to open jets and pipe. Even replacing competitive air nozzles can provide significant cost savings in energy and noise levels. The nozzle is of rugged, cast zinc, single piece design ideal for harsh environments
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us