Other Products / Services #5141707

High pumping action. This blade is for mixing on a high speed disperser with minimal shear and heat build-up. This blade is popular in the mixing and let down of coatings. It is available in sizes from 2 and up. The High Vane #2 and the #2G are different teeth configurations but the results are the same.

The Polyblade impeller is the answer to the negative issues which are inherent in metal dispersing blades. It is constructed from a wide variety of polymers depending upon the application:

The Polyblade impeller is the answer to the negative issues which are inherent in metal dispersing blades. It is constructed from a wide variety of polymers depending upon the application:

The Polyblade impeller is the answer to the negative issues which are inherent in metal dispersing blades. It is constructed from a wide variety of polymers depending upon the application: Polyurethane for maximum abrasion resistance in a non-solvent slurry;Anti-static polyethylene for solvent slurries;PTFE for high temperature slurries;Nylon for chemical resistance;Polypropylene & PTFE for FDA and pharmaceutical applications;Available sizes range from 1.25" and up

The Polyblade impeller is the answer to the negative issues which are inherent in metal dispersing blades. It is constructed from a wide variety of polymers depending upon the application: Polyurethane for maximum abrasion resistance in a non-solvent slurry;Anti-static polyethylene for solvent slurries;PTFE for high temperature slurries;Nylon for chemical resistance;Polypropylene & PTFE for FDA and pharmaceutical applications;Available sizes range from 1.25" and upFeatures of the Polyblade: Abrasion Resistance; Safety; Low Heat; Low Maintenance; No metal contamination; Wont Bend or Deform; High Value. This unique design improves production time by efficiently pumping the material so that the slurry sees the shear zone of the blade more frequently than with any other style of blade. The batch will run cooler unless special heat enhancing scoops are requested. Light weight materials are more easily incorporated. Heavy settling material is lifted off the bottom. This blade cannot be put on backwards. It will outlast metal and hard coatings 5-10 times longer. Best of all this blade never gets sharp and so a hazard is removed from the plant or lab.

A very popular impeller for high speed mixing up to 200 gallons assuring that material is mixed in all directions. Available in regular and high vein pitch with or without collar and set screw. This blade is more effective than a standard 3 bladed prop. The blade should be sized to be 13-12 the diameter of the tank depending upon viscosity.

Popular blade for dispersion work. Primarily a high shear blade. There are newer technologies that provide more pumping with shear. Efficient design which has proven to be an excellent blade for shear. Stock sizes from 1 and larger. We recommend sizes of 1.5 and larger.