Post Your Requirement Menu

Welcome User

Other Products / Services

Our product range comtains a wide range of Wide Knife Band, Portable Band Blade, Blade Sharpening Stone, Special Notch and wire cutting blades

Leather Splitting

Precision Blades “Leather Splitting” blades are unique in their manufacturing process. These blades were specifically designed for specialty applications such as splicing leather. This unique blade may also be used for thin cuts of re-bond, foam, rubber, packaging materials, insulation, carpet re-cyclying, textiles, and cork. This blade is the perfect choice for skiving and peeling. “Leather Splitting” knife blades possess a high carbon content, mined from European ore. The unique metallurgical structure of our steel is exclusive to Precision Blades, resulting in holding the knife edge longer than other products in the market. Precision Blades pays particular attention to “Leather Splitting” welding process, which insures the weld hardness is the same as the blade's hardness. At the same time our welds deliver strong bond, which withstands higher feed rates, and provides extended blade life. The finishing process includes inductive heat tempering, to increase material hardness, then a final polishing process is implemented to insure proper, precise tracking. “Leather Splitting” is available: Precision Track, Supreme Track, or Ultra-Supreme Track Single or double edge Zero, single, or double bevel Custom bevel geometry (ie. 2 to 1, 3 to 1, or specific measurement beveling) Widths from 1 ½” to 4” Thickness gauges, depending on widths, from .020” to .050” Available in Stainless Steel See foam blades accessories section for appropriate blade Grinding Stones for your particular machine. *Consult Precision Blades technical staff at (662) 869-1034 for more information and recommendations for your specific applications.

View Complete Details

CNC Super-Steel Contour Blade

  • Dimensions 3MM X.45MM3MM X.45MM3.6MM X .6MM3.8MM X .7MM

Precision Blades new CNC Super-Steel Contour Blade is a new revolutionary blade used when clean aggressive cutting and prolonged blade life is required. Super-Steel Contour Blade teeth are extra sharp and hardened while maintaining high elasticity. The combination of the Super-Steel material and extra sharp processes, result in significant increase in blade life and user productivity. Super-Steel Contour Blades material is manufactured using a special chemical composition steel possessing a unique metallurgical structure. Customer tests show Super-Steel Contour blades will provide up to 4 times the life of other blades on the market. Additionally, our state-of-the-art manufacturing processes is methodical in guaranteeing every tooth wi properly sized and extra sharp. Precision Blades proprietary welding process also delivers a stronger bond which withstands higher feed rates. Applications Applications Super-Steel Contour Blades are available: Knife Edge or V-Tooth V-Tooth pitches of 14, 18, 24 TeethInch, (V or Flat tooth), 10 Tooth Mini-scallop, or Piranha Scallop tooth configurations 4 widths available in 3, 3.6, 3.8, or 4.5MM 4.5MM available with a longer tooth for extended blade life Thickness gauge, depending on width, .45MM, .6MM, .7MM, or .8MM Induction heat treated of teeth available for extended blade life Single or double bevel Single edge only Stainless Steel available *Consult Precision Blades technical staff at (662) 869-1034 for more information and recommendations, as well as details regarding samples on a trial basis.

View Complete Details

CNC Contour Blades

  • Dimensions 3MM X.45MM 3MM X .6MM 3.6MM X .6MM 3.8MM X .7MM

Precision Blades CNC “Contour Blades” are the perfect “affordable” solution where clean aggressive cutting is needed. “Contour Blades” teeth are manufactured to be extra sharp and hardened while maintaining high elasticity. These special processes result in increased blade life and user productivity. Knife Edge blades will also have decreased grinding time due to the precise pre-sharpening process at the manufacturing point. ”Contour Blades” material is manufactured using high carbon European mined ore. The chemical composition of the finished product possesses a unique metallurgical structure exclusive for all Precision Blade products. Our state of the art manufacturing processes are methodical in guaranteeing every tooth is properly sized and extra sharp. Precision Blades proprietary welding process also delivers a stronger bond, which withstands higher feed rates than other blades on the market. Applications “Contour Blades” are available: Knife Edge or V-Tooth V-Tooth pitches of 14, 18, 24 TeethInch, or flat tooth, 10 Tooth Mini-Scallop, or Piranha Scallop tooth configurations 4 widths available in 3, 3.6, 3.8, or 4.5MM 4.5MM available with a longer tooth for extended blade life Thickness gauge, depending on width, .45MM, .6MM, .7MM, or .8MM Induction heat treated of teeth available for extended blade life Single or double bevel Single edge only Stainless Steel available *Consult Precision Blades technical staff at (662) 869-1034 for more information and recommendations for your specific applications.

View Complete Details

Narrow Knife Band

  • Width 1/4"3/8"1/2"5/8"3/4"

Precision Blades “Narrow Knife Band” knife edge products are designed to easily cut many variations of thin, lower density foams, sponge, rubber, and leather material. “Narrow Knife Band” provides a precise smooth dust free finish. It is highly recommended to only use knife band products with machines which possess continual sharpening systems to keep blades sharp and increase blade life. “Narrow Knife Band” material is manufactured using high carbon European mined ore. The chemical composition of the finished product possesses a unique metallurgical structure exclusive for all Precision Blade products. Our state of the art manufacturing processes are methodical in guaranteeing every blade is extra sharp. Precision Blades proprietary welding process also delivers a stronger bond which withstands higher feed rates than other blades on the market. Applications “Narrow Knife Band” is available: Available in widths from ¼” up to 1 ¼”. For widths narrower than 14", see CNC "Contour Blade" section. Thicknesses, depending on widths, of .020” and .035”. Single or double edge Single or double bevel 180 deg. twist for double edge Stainless Steel See foam blades accessories section for appropriate blade Sharpening Stones, and Linear Blade Guides for your particular machine. *Consult Precision Blades technical staff at (662) 869-1034 for more information and recommendations for your specific applications.

View Complete Details

Wide Knife Band

  • Width 1 1/2" 2"2 3/8"3 1/4"

Precision Blades “Wide Band” knife blades are specifically designed for specialty applications, including cutting re-bond, foam, rubber, leather, packaging materials, insulation, carpet re-cycling, textiles, and cork. This blade is the perfect choice for skiving and peeling. . It is highly recommended to use “Wide Band” knife blades with machines that possess continuous sharpening grinding stones to keep blades sharp and maximize blade life. “Wide Band” knife blades possess a high carbon content mined from European ore. The unique metallurgical structure of our steel is exclusive to Precision Blades, resulting in holding the knife edge longer than other products in the market. Precision Blades pays particular attention to the “Wide Band” welding process, which insures the weld hardness is the same as the blades hardness. Our welds deliver a strong bond, which withstands higher feed rates and provides extended blade life. The finishing process includes inductive heat tempering, to increase material hardness, then a final polishing process is implemented to insure proper, precise tracking. There are 3 separate types of “Wide Band” styles: Precision Track (PT) - Provides minimum deflection and blade movement. Supreme Track (ST) - Higher degree of tracking, polishing, and specialty weld processing in the finishing process. Ultra-Supreme Track (UST) - Ultimate trackingpolishing which eliminates deflection and blade movement specifically when cutting very thin material.

View Complete Details

Special Notch

  • Width 1/4" 3/8" 1/2" 1 1/4"

Precision Blades “Special Notch” blade was designed as a modified knife edge with a small serration (notch) every ¼”. The notch promotes a more aggressive cutting edge than the standard knife edge, while providing a clean cut of the material. “Special Notch” may be used on machines with or without sharpening stones, however, grinding stones are recommended since they will keep the blade sharper and extend blade life. “Special Notch” material is manufactured using high carbon European mined ore. The chemical composition of the finished product possesses a unique metallurgical structure exclusive for all Precision Blades products. Our state of the art manufacturing processes is methodical in guaranteeing every tooth is properly sized and extra sharp. Precision Blades proprietary welding process, also delivers a stronger bond which withstands higher feed rates than other blades on the market. Applications “Special Notch” is available: Single or double edge Single or double bevel 180 deg. twist available for double edge. Available in widths from ¼” up to 1 ¼” Thicknesses, depending on widths, of .020” and .035”. For widths narrower than ¼” see CNC “Contour Blade” section. Stainless Steel See Ordering Designation References in the Ordering Matrix Section. *Consult Precision Blades technical staff at (662) 869-1034 for more information and recommendations for your specific applications.

View Complete Details

V-Tooth

  • Width 1/4" 3/8" 1/2" 1 1/4"

Precision Blades “V-Tooth” products are the perfect choice when cutting soft to medium materials including foams, plastics, rubber, packaging materials, etc. “V-Tooth” cuts more aggressively than a knife edge blade. However, if used on a machine with grinding stones, the stones should be disengaged. The most popular standard straight V-Toothed blade is 14 tooth. V-Tooth is also available with the more aggressive “conventional” type tooth which should be considered when cutting denser foams. Precision Blades “V-Tooth” material is manufactured from high carbon European mined ore. The chemical composition of the finished product possesses a unique metallurgical structure exclusive for all Precision Blade products. Precision Blades has developed a new manufacturing process and design for V-Tooth blades resulting in an Extra-Sharp tooth and a "U" shaped gullet (versus a "V" shaped gullet). These small details provide smoother, more aggressive cutting and significantly extends blade life. Precision Blades proprietary welding process also delivers a stronger bond which withstands higher feed rates than other blades on the market.

View Complete Details

Sharks Tooth

  • Width 1/2" 5/8" 3/4"

Precision Blades “Shark Tooth” was developed by Precision Blades Product Development Group specifically to cut more aggressively, very dense mineral wool fibers made from basalt rock and slag. Applications include insulation products made for aerospace, marine, industrial, sound proofingacoustical applications, furnaces, HVAC, etc. Other applications include fiber, packaging, and honeycomb. “Shark Tooth” entire tooth is sharpened, including the gullet, and is specifically designed to run with the teeth facing backwards for smooth cutting. The “Sharks Tooth” blade material is manufactured using high carbon European mined ore. The chemical composition of the finished product possesses a unique metallurgical structure exclusive for all Precision Blade products. Our state of the art manufacturing processes is methodical in guaranteeing every tooth is properly sized and extra sharp. Precision Blades proprietary welding process also delivers a stronger bond which withstands higher feed rates than other blades on the market.

View Complete Details

Piranha Scallop

  • Width 3MM 3.6MM 3.8MM 4.5MM

Precision Blades “Piranha Scallop” was developed by Precision Blades founder. Its the most aggressive blade in our line, specifically designed to cut through medium to very dense foams evenly and smoothly. “Piranha Scallop” is the favorite blade for mattress manufacturers, cutting very dense foams, and works particularly well with Gel-Foams. It also works well for cutting plastics, cardboard, packaging materials, rubber, etc. “Piranha Scallop” material is manufactured using high carbon European mined ore. The chemical composition of the finished product possesses a unique metallurgical structure, exclusive for all Precision Blade products. Our state of the art manufacturing processes is methodical in guaranteeing every tooth is properly sized and extra sharp. Precision Blades proprietary welding process also delivers a stronger bond, which withstands higher feed rates than other blades on the market. Applications “Piranha Scallop” is available only in one tooth configuration. 12 widths from 3MM to 4.5MM, 30MM, and ¼” to 1 ¼” Thickness gauge, depending on width, are from .020 to .035 Single or double edge Single or double bevel Stainless steel *Consult Precision Blades technical staff at (662) 869-1034 for more information and recommendations for your specific applications.

View Complete Details

Butcher Blade

  • Width 1/4" 3/8" 1/2" 5/8"

The �Butcher Blade� applications include pork, fish, and poultry. However it can also be used for dense foams, corrugated cardboard, tubes, packaging materials, polyethelene/polyurethane foams and bubble wrap. The �Butcher Blade� has a set tooth configuration (one tooth left, one tooth right) with one straight (raker tooth) every third tooth. The teeth are induction-heat treated, to provide a harder cutting surface while the back is left untreated to provide elasticity to the blade structure. The �Butcher Blade� material is manufactured using high carbon European mined ore. The chemical composition of the finished product is a unique metallurgical structure exclusive for all Precision Blade products. The finished product includes a unique heat treating process which significantly hardens the blade providing significant extended blade life. Our state of the art manufacturing processes is methodical in guaranteeing every tooth is properly sized, extra sharp and set to precise specifications. Precision Blades proprietary welding process also delivers a stronger bond which withstands higher feed rates than other blades on the market. Applications �Butcher Blade� is available: Tooth pitches of 3 or 4 Teeth/Inch Widths of 5/8�, ¾�, 1� Thickness, depending on widths, of .020�, .022�, and .032� Stainless steel *Consult Precision Blades technical staff at (662) 869-1034 for more information and recommendations for your specific applications.

View Complete Details

scallop

  • widths ¼” to 2” and 30MM
  • Thickness 020” to .035” and .45MM

Precision Blades “Scallop Blade” applications include medium to heavy foams, insulation materials, rubber, paperboard, packaging film and foil, cardboard tubes, fiberglass, and boneless meats. “Scallop” is a very aggressive blade which exudes minimal dust. “Scallop” is the favorite blade for mattress manufacturers cutting very dense foams and works particularly well with Gel-Foams. ”Scallop” material is manufactured using high carbon European mined ore. The chemical composition of the finished product possesses a unique metallurgical structure exclusive for all Precision Blade products. Our state of the art manufacturing processes is methodical in guaranteeing every tooth is properly sized and extra sharp. Precision Blades proprietary welding process also delivers a stronger bond which withstands higher feed rates than other blades on the market.

View Complete Details

Mini Scallop

  • Thickness 020” to .035” and .45MM
  • widths 3MM to 4.5MM, 30MM and ¼” to 1 ¼”

The 10-Tooth “Mini-Scallop” unique blade design was developed by Precision Blades Product Development group. The “Mini-Scallop” possesses a long radial gullet and extra sharp teeth which promotes lower dust and extended blade life than standard V-Toothed products. Precision Blades “Mini-Scallop” material is manufactured from high carbon European mined ore. The chemical composition of the finished product possesses a unique metallurgical structure exclusive for all Precision Blade products. Precision Blades proprietary welding process also delivers a stronger bond which withstands higher feed rates than other blades on the market.

View Complete Details

Wavy Blade

  • Thickness 020” to .035”
  • Widths 1/4” to 2”

The “Wavy Blade” cuts straight, and smoothly while leaving minimal dust in materials such as lighter foams, fabric, felt, fibrous materials, foam rubber, sponge, vinyl, leather, paper, cardboard, filter media. The “Wavy Blade” works particularly well cutting fibrous materials since the wave cuts smoothly through the materials and will not pull the individual fibers like a V-Tooth product. ”Wavy Blade” material is manufactured using high carbon European mined ore. The chemical composition of the finished product possesses a unique metallurgical structure exclusive for all Precision Blade products. Our state of the art manufacturing processes is methodical in guaranteeing every tooth is properly sized and extra sharp. Precision Blades proprietary welding process also delivers a stronger bond which withstands higher feed rates than other blades on the market.

View Complete Details

Packaging Blade

  • widths ½” to 1 ¼” and 30MM
  • Thickness 020” to .035”

The “Packaging Blade” is the perfect choice for cutting corrugated cardboard, medium to heavy foam, bubble wrap, bone, styrofoam, and tissue processing. “Packaging Blades” have a set tooth configuration (ETS-one tooth left, one tooth right, etc.) or Raker (one tooth left, one right, with the third tooth straight). The blade is induction heat treated to provide a harder cutting surface and extended blade life. The “Packaging Blade” material is manufactured using high carbon European mined ore. The chemical composition of the finished product is a unique metallurgical structure exclusive for all Precision Blade products. The finished product includes a unique heat treating process which significantly hardens the blade providing significant extended blade life. Our state of the art manufacturing processes is methodical in guaranteeing every tooth is properly sized, extra sharp and set to precise specifications. Precision Blades proprietary welding process also delivers a stronger bond which withstands higher feed rates than other blades on the market.

View Complete Details

hand knives

  • Lengths 5”, 8”, 12”, or 14”

Our “Hand-Knives” are designed for hand held cutting machines used primarily for pattern cuts. Can also be used for straight cuts. Hand-Knives are sold in pairs and are single beveled. When properly installed, they produce a reciprocating action which cleanly cuts foam, sponge, light-weight rubber, etc. The “Hand-Knife” material is manufactured using high carbon European mined ore. The chemical composition of the finished product possesses a unique metallurgical structure exclusive for all Precision Blade products. Our state of the art manufacturing processes is methodical in guaranteeing every tooth is properly sized and extra sharp. Precision Blades proprietary welding process also delivers a stronger bond which withstands higher feed rates than other blades on the market.

View Complete Details

Portable Band Blade

  • Dimension ½” width X 44 7/8” length

Precision Blades offers “Portable Band Blades” for most hand-held portable machines including Porta-Band machines. These blades are a M42 Bi-Metal with a high cobalt content which is suitable for cutting many different variations of metals. The “Portable Band Blades” material is manufactured using high carbon European mined ore. The chemical composition of the finished product possesses a unique metallurgical structure exclusive for all Precision Blade products. Our state of the art manufacturing processes is methodical in guaranteeing every tooth is properly sized and extra sharp. Precision Blades proprietary welding process also delivers a stronger bond which withstands higher feed rates than other blades on the market.

View Complete Details

wire cutting blades

  • diameters 1.0mm to 1.7mm
  • Lengths 7,500mm (24.6 ft.) to 11,000mm (36 ft.)

Precision Blades Wire Cutting blades are an alternative to using steel blades when cutting various materials including expanded polyurethane foams, extruded polyester, rock wool, foam resins, and calcium silicates. Wire Cutters are used on specialized wire cutting machines offered by many band saw manufacturers. These machines utilize a narrow, interwoven, roughened (abrasive) steel wire which cleanly cuts through many materials like a knife. Their chemical makeup is a high carbon steel content. Precision Blades' Wire Cutters are extremely durable, providing longer life than standard band saw blades and can cut through even the densest materials. Wire Cutters can also be used on specialty computerized CNC contour machines where preset designated program cuts to a desired length, width, andor thickness. *Consult Precision Blades technical staff at (662)869-1034, for more information and recommendations for your specific applications.

View Complete Details

Hard Back

  • Thickness .025”, .032”, or .042”
  • Widths 1/8” to 2”

Precision Blades “Flex-Back” is perfect for general wood processing including contouring, furniture frame cutting, cardboardpackaging material, bubble wrap, etc. Precision Blade “Flexi-Back” possesses a high carbon content. The blade teeth are milled, rather than stamped producing a sharper more consistent tooth. The teeth are then induction heat-tempered to a high Rockwell hardness, while leaving the back of the blade more flexible. This dual process provides a precision sharpened, hardened tooth that cuts quickly and efficiently through the wood, while the flexible blade back provides greater elasticity, dramatically extending the life of the blade. For the furniture cutting process, it is recommended that every tooth be set (ETS). Flexi-Back is available in 6 different widths from 18” to 2”, .025.032.035 thicknesses (depending on width), and 7 different pitches ranging from 3 to 24 Pitch (TeethInch). “Flex-Back” Blade material is manufactured using high carbon European mined ore. The chemical composition of the finished product possesses a unique metallurgical structure exclusive for all Precision Blade products. Our state of the art manufacturing processes is methodical in guaranteeing every tooth is properly sized and extra sharp. Precision Blades proprietary welding process also delivers a stronger bond which withstands higher feed rates than other blades on the market.

View Complete Details

pallet band

  • Widths 3/8” to 2”
  • Thickness 020”, .022”,.032”

Precision Blades ”Pallet Band” is the perfect blade choice for pallet manufacturing. The high carbon content offers superior cutting performance, coupled with unrivaled fatigue resistance. “Pallet Band” possess precision milled teeth, rather than stamped producing a sharper more consistent tooth. The teeth are then induction heat treated to increase the hardness which provides extended blade life. “Pallet Band” tolerates higher feed pressure, allowing the cutting of more raw material in less time than using traditional manufacturing technologies. Every other tooth has a light set with the center tooth being straight (Raker) to clean out the chips as the saw passes through the wood. The recommended product for Pallet Band manufacturing is 1” to 1 12” width, .035” to .042” thickness, and 6 or 8 TeethInch (TPI). “Pallet Band” material is manufactured using high carbon European mined ore. The chemical composition of the finished product possesses a unique metallurgical structure exclusive for all Precision Blade products. Our state of the art manufacturing processes is methodical in guaranteeing every tooth is properly sized and extra sharp. Precision Blades proprietary welding process also delivers a stronger bond which withstands higher feed rates than other blades on the market.

View Complete Details

Re-Saw Blades

  • Thickness .035”, .042”, .050”
  • Widths 1/2” to 1 1/4"

Precision Blades “RE-SAW” blades are manufactured with M42 Bi-Metal steel. It is the perfect blade choice for disassembling pallets. The blade was designed with a fine tooth pitch that easily cuts through nails with minimum resistance and binding. The best recommended choice for fast prolonged production is a blade having a 1 ¼” width, .042 thickness, and either a 58 variable or 6 constant pitch. Precision Blades “RE-SAW” blades are manufactured with M42 Bi-Metal steel. It is the perfect blade choice for disassembling pallets. The blade was designed with a fine tooth pitch that easily cuts through nails with minimum resistance and binding. The best recommended choice for fast prolonged production is a blade having a 1 ¼” width, .042 thickness, and either a 58 variable or 6 constant pitch. “Re-Saw” blade material is manufactured using high cobalt ore. The chemical composition of the finished product possesses a unique metallurgical structure exclusive for all Precision Blade products. Our state of the art manufacturing processes is methodical in guaranteeing every tooth is properly sized and extra sharp. Precision Blades proprietary welding process also delivers a stronger bond which withstands higher feed rates than other blades on the market.

View Complete Details

Timber Slitter

  • Widths ¾” to 1 1/2"
  • Thickness .032” or .042”

Precision Blades “Timber-Slitter” blade is a high carbon, hard-toothed blade, and perfect for timber slitting applications. This hooked tooth blade is milled, rather than stamped, providing a sharper more consistent tooth. It is then induction heat-tempered, which increases the blade hardness. It easily cuts through both soft and hardwoods, and may be used for portable sawmills or fixed multi-head sawmills. It uses narrow blade band saw technology, and can also be used for pallet manufacturing, fencing, crates, and timber boards. “Timber-Slitter” blade material is manufactured using high carbon European mined ore. The chemical composition of the finished product possesses a unique metallurgical structure exclusive for all Precision Blade products. Our state of the art manufacturing processes is methodical in guaranteeing every tooth is properly sized and extra sharp. Precision Blades proprietary welding process also delivers a stronger bond which withstands higher feed rates than other blades on the market.

View Complete Details

Genesis Blade

  • Thickness .025”, .035”, and .042”
  • widths ¼” to 1 ¼”

Precision Blades “Genesis” M42 high cobalt Bi-Metal blade is a premium general purpose band saw blade. It possesses strong wear resistant tooth hardness that ensures longer blade life. Excellent choice for cutting small solids and thin wall tubing including carbon steels, alloy steels, stainless steels, and tool steels. “Genesis” blade material is manufactured using high cobalt European mined ore. The chemical composition of the finished product possesses a unique metallurgical structure exclusive for all Precision Blade products. Our state of the art manufacturing processes is methodical in guaranteeing every tooth is properly sized, set, and extra sharp. Precision Blades proprietary welding process also delivers a stronger bond which withstands higher feed rates than other blades on the market.

View Complete Details

Stealth Blade

  • Thickness .035”, .042”, .050”, or .063”
  • widths ¼” to 2”,

The “Stealth” is anM42 high cobalt Bi-Metal multi-purpose blade - the premium choice for cutting all type of metals. “Stealth” possesses a positive rake of 5 to 10 degrees, depending on tooth pitch, to more aggressively cut through difficult machining solid, angled, thick wall tubing and light structural metals. A modified progressive close tolerance tooth set provides a smoother finish than a standard raker set. Tooth profile delivers aggressive cutting performance while resisting tooth strippage. The ”Stealth” blade material is manufactured using high cobalt European mined ore. The chemical composition of the finished product possesses a unique metallurgical structure exclusive for all Precision Blade products. Our state of the art manufacturing processes is methodical in guaranteeing every tooth is properly sized, set, and extra sharp. Precision Blades proprietary welding process also delivers a stronger bond which withstands higher feed rates than other blades on the market.

View Complete Details

Aggressor Blade

  • Thicknesses .035”, .042”, .050”, and .063”
  • widths 1” to 2 5/8”

The “Aggressor” blade is an M42 high cobalt Bi-Metal blade - possesses a 15 degree rake “curvilinear” tooth. This aggressive blade is the perfect choice for cutting difficult materials such as thick, solid, steel bars which are bundled. The unique tooth design provides fast cutting with minimal tooth strippage. The “Aggressor” blade material is manufactured using high cobalt European mined ore. The chemical composition of the finished product possesses a unique metallurgical structure exclusive for all Precision Blade products. Our state of the art manufacturing processes is methodical in guaranteeing every tooth is properly sized, set, and extra sharp. Precision Blades proprietary welding process also delivers a stronger bond which withstands higher feed rates than other blades on the market.

View Complete Details

terminator

  • Thickness 035”, .042”, .050”, or .063”
  • widths 1” to 2 5/8”

Precision Blades “Terminator” is a M42 high cobalt Bi-Metal blade - developed for cutting thick walled structural materials that tend to close into the cut. The unique tooth design with a 10 degree positive raker face angle eliminates this occurrence, eliminating blade damage due to binding while cutting heavy structural beams and stackedbundled tubing. The “Terminator” blade material is manufactured using high cobalt European mined ore. The chemical composition of the finished product possesses a unique metallurgical structure exclusive for all Precision Blade products. Our state of the art manufacturing processes is methodical in guaranteeing every tooth is properly sized, set and extra sharp. Precision Blades proprietary welding process also delivers a stronger bond which withstands higher feed rates than other blades on the market.

View Complete Details

Linear Stripper Guide

  • widths 1 ¾” to 4”

Precision Blades manufactures Linear Blade Guides for all OEM manufactured machines. “Linear Stripper Guides” are made from heavy gauge steel construction with widths from 1 ¾” to 4”, and any length depending on your needs. Precision Blades welds the top and bottom pieces of the guide resulting in a product which will provide a higher quality product versus other manufactures who glue their parts together. Stripper Guides finish is a baked on Teflon® coating providing a slick glassy finish for the blade to easily travel on. These details provide our customers a higher quality product which provides extended blade and guide life. You will also find Precision Blades pricing for “Linear Stripper Guides” to be very competitive and shipping lead times are typically 3 to 4 days from receipt of order.

View Complete Details

Blade Sharpening Stone

Precision Blades offers “Blade Sharpening Stones” for most OEM manufactures machines which use knife band blades. Our stones are available for both “Narrow Band” as well as “Wide Band” blades in many different sizes. Precision Blades stocks many sizes in bulk and will in most cases ship your order the same day received. You will again find our prices to be extremely competitive for our sharpening stones.

View Complete Details

Flap, Cut Off & Grinding Wheels

  • quality 4 ½” Flap,

Precision Blades offers a line of high quality 4 ½” Flap, Cut Off, and Grinding wheels at extremely competitive price levels. As with sharpening stones Precision Blades stocks a number of these products with various grits for your quick ship needs.

View Complete Details

Tell Us What are you looking for? Will call you back

Contact Us

  • Saltillo, MS 38866 map, United States