Post Buy Requirement
PI
United States
Add Review

Our Products

  1. Sensors 3 Products available
  2. Cables And Wire Accessories 9 Products available
  3. Hoses, Hose Assemblies & Fittings 5 Products available
  4. Filters 3 Products available
  5. Pumps, Pumping Machines & Parts 7 Products available
  6. PVC, PP & Plastic Products 3 Products available
  7. Hose Pipes 3 Products available
  8. Industrial Pump 3 Products available
  9. Others 45 Products available

Other Products / Services

PGM METERING SYSTEM

  • Series MPN: 3A0260H
The Graco PGM (Precision Gear Metering) Metering System delivers a smooth, consistent bead dispense even with high-viscosity materials. And because it also provides higher flow rates, manufacturing facilities can dramatically improve production capacity and ROI.

Ideally suited for: Solar panel manufacturing Automotive windshield manufacturing

Handles a range of materials:
Ambient, warm melt and hot melt materials to 400F (204C)
Low to high-viscosity materials
Unlimited volume

Improve your production capacity with PGM's high flow rates:

Provides high flow rates:
Up to 600 ccmin for ambient materials
Up to 300 ccmin for high viscosity hot melt materials

Smooth, consistent bead dispense - even at high flow rates

Offers clean starts and stops for less material waste

Bead control saves material costs

Wrist-mountable design assures precise dosing control

Touch-screen controls are easy to use, easy to integrate
View Complete Details

Supply Systems

  • Series MPN: 313528E
Supply Systems- Bulk material unloader for ambient sealants, adhesives and other medium to high-viscosity materials

For large drums up to 200 liter (55 gal)

Graco D200 - For high-volume in-plant applications
Graco D200s - For heavy-duty, high-volume applications of high-viscosity materials. Provides more down-force for difficult-to-move materials

For pails up to 60 liter (16-gal)

For 20, 30 and 60 liter (5, 7, and 16-gal) pail sizes. Provides the same proven technologies as the larger systems, but with small NXT Air Motors.
Graco L20c - A lightweight, elevator ram on a cart
Graco S20 - For low-volume applications of medium to high-viscosity materials
Graco S20c - Same as the S20, but includes a cart
Graco D60 - Provides higher down-force and 60-liter pail capacity

Features include:

Industry-first controls give you immediate and important information at the touch of a button

Quick placement of drum or pail

Platen wipers can be replaced in seconds

Pump's quick-disconnect coupler, turbuckle mount and pump cartridge packings let you service the pump without removing it from the ram

High-quality, durable parts reduce maintenance time, maximize uptime
View Complete Details

1K Ultra-Lite Valves

1K Ultra-Lite- Precision Dispense Valve for precise bead dispensing of sealants and adhesives. The
1K Ultra-Lite valves are top-of-the-line, lightweight, compact valves designed for long service.

Features include:

Manual and automatic versions available

Lubricated packings for longer seal life

Severe-Duty needle and seat

Eliminates snake-head and material drip

Adjustable forward travel to reduce material surge
View Complete Details

INVISIPAC

  • Series MPN: 333347D
InvisiPac is a Tank-Free Hot Melt Adhesive Delivery System. With the Graco InvisiPac, youre up to operating temperature and running production in less than 10 minutes. Because its engineered with a Tank-Free design, adhesive spends less time at high temperature, significantly reducing char and its negative side effects. You get great performance even from low cost adhesives allowing you to keep your packaging line up and running.

Features include:

Vacuum system feeds pellets to an in-line melt chamber- Pellets are automatically added as needed

The InvisiPac System sends a continuous flow of adhesive through production - significantly reducing the time adhesive spends at high temperature

Quick start-up ready in less than 10 minutes, eliminating costly downtime

No tank adhesive supplied and melted to meet your applications demand means less adhesive time at high temperature

Less adhesive time at high temperature means less char and less material degradation

Less char results in reduced nozzle plugging, less system maintenance and more uptime

Great performance, even with low-cost adhesives
View Complete Details

SANIFORCE DOUBLE DIAPHRAGM PUMP

  • Series MPN: 311879Y
SaniForce 1040 Double Diaphragm Pump: 1 inch air-operated double diaphragm sanitary pump with flow rates up to 40 gpm (151 lpm) - ideal for food-related applications. One of the best, most durable, lube-free air valves in the industry. Ideal for applications requiring high flow rates and portability, Gracos dependable diaphragm pumps offer a wide range of food-grade elastomers including Santoprene, PTFE and overmolded EPDMPTFE.

SaniForce 1040 Double Diaphragm Pump
1.5 in (38 mm) Tri-clamp connection
All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21
Fluid pressure to 120 psi (8.4 bar, 0.84 MPa)
Flow rates of 40 gpm (151 lpm)
High volume evacuation of liquid concentrates from holding vesselsrepackaging of fluids from original container to smaller receptacles - up to 10, 000 cps
Suitable to pump: concentrated fruit juices, sauces, pastes, starches, wine, food-grade oil, jams and jellies

Patented, lube-free air valve
Three-way pilot valve for no-stick operation
Increase durability and reduce repair time with fewer moving parts
1040, 1590 and 2150 SaniForce pumps use common center sections
100% externally serviceable air valve

PTFEEPDM Overmolded Diaphragms
Overmolded diaphragm plate w PTFE on the fluid side & EPDM on the air side- no place to harbor bacteria
Improve wear and diaphragm life with no exposed diaphragm plate on the fluid side
Longer diaphragm life in abrasive applications that still require PTFE
View Complete Details

Controller

  • Series MP 3000
Upgrade without the upcharge! Our MP3000 Series Viscosity Controller offers an entirely new standard of versatility and economy in a compact PLC Touch Screen package. Save set up time with simple, easy to understand menus User friendly intuitive touchscreen interface Separate PLC with two (2) 4-20 madc each analog inputs & outputs Set point viscosity control with solvent and make up fluid additions Set point pH control with amine extender & water additions
- Save set up time with simple, easy to understand menus - User friendly intuitive touchscreen interface - Separate PLC with two (2) 4-20 madc each analog inputs & outputs - Set point viscosity control with solvent and make up fluid additions - Set point pH control with amine extender & water additions>
View Complete Details

PISTOL GRIP DISPENSE GUNS

  • Series ULTRA-LITE 6000
The Ultra-Lite 6000 Pistol Grip Flow Gun for precise control of low-to-medium viscosity materials. The operator-friendly Ultra-Lite 6000 combines ergonomic design with high-operating pressure for dispensing low-to-medium viscosity industrial and automotive sealants and adhesives.

Features include:

Operating pressures to 6000 psi (414 bar; 41.4 MPa).

150 headhandle angle is more comfortable for operator

Changeable tips for a variety of dispensing needs

Lightweight with convenient trigger pull
View Complete Details

MAPLE PIGGABLE PUMP

  • Series 20 AFP
The Maple 20 AFP piggable pump is the finishing industry's best pump solution. Contains the best air motor and the best fluid section and is the industry leader for reliable operation, simple maintenance and hydraulic efficiency. The Maple 20 operates at 4.2:1 ratio, delivering 7.5 GPM at 60 cycles per minute.

Features include:

Handles the Troublesome and Difficult Coatings- From high solids to CARC to UV as well as moisture sensitive to shear sensitive

Backup seal ensures you can keep on pumping until the next shift

Quick exhaust valve enables rapid switchover and smooth flow

Simple to Maintain- No "upper seal" to keep lubricated or adjusted

Hydraulically Efficient- Piston seals are always engaged. If the air motor is consuming air, you're moving fluid, unlike some competitive designs.
View Complete Details

DISPENSIT VALVE

The Dispensit 1095 is a positive displacement, controlled-flow metering rod valve, designed to produce precise beads of materials of nearly any viscosity.

Features include:

Controlled flow positive displacing metering valve

Simple control

Precision hydraulic flow control

Ideal for dispensing high-viscosity gasketing materials

Delivers uniform beads
View Complete Details

LINE FLOW GUNS Spray Guns

In-Line Flow Guns for precise control of low-viscosity sealants and adhesives.

Handles: PVC sealers with glass or plastic filler Low to high abrasive fluids Waterborne or solventborne materials Most fluids up to 150, 000 centipoise

Features include:

Well-suited for dispensing onto horizontal surfaces

Selectable trigger lock and hanger slot for operator convenience

Accepts flanged or threaded tips for a variety of dispensing needs

204355 has rugged, lightweight design

240199 has lowest trigger force and weight in its class
View Complete Details

SABLINK System

Incorporating our new VTS no moving parts viscosity sensor, custom designed heat exchanger and optional pH electrode, in an easy to install modular package; our StablINK system is designed to eliminate process fluid variables by reducing temperature fluctuations caused by atmospheric conditions, press speeds or other process inconsistencies.
View Complete Details

Caulk Guns

  • Series 950 SERIES
950 Series sealant guns replace caulk guns in high-volume operations. They dispense sealants from 2.5, 6 and 12 oz. (74, 177 and 355 ml) cartridges. All metal rugged construction Knob is permanently captured onto the gun body Pistol grip or palm grip Air-powered or manual-operated.

Features include:

All metal rugged construction

Knob is permanently captured onto the gun body

Pistol grip or palm grip

Air-powered or manual-operated
View Complete Details

Super-Mini Tee

  • Size 2.0" x 3.75'
  • Weight 2.5 lbs
Series 8100- Super-Mini Tee Type Filters
(2.0" x 3.75') Compact Size
up to 10, 000 PSI. 1.5 GPM 50 SCFM

Stainless Steel Construction
Light-Weight: 2.5 lbs
Ports: 14" NPT
View Complete Details

COMPRESSED AIR TEMPERATURE CONTROL System

The Anti-Condensation Compressed Air Temperature Control System by Saint Clair Systems is a patented approach to keeping turbine air above the dew point. The SCS 2100AH mounts outside the explosion-proof environment and uses water to transfer heat to the associated air heaters located within 3' of the turbine drive air inlet. This temperature control approach eliminates condensation and the problems that it creates!
View Complete Details

RECORABLE COAXIAL HOSE HEAT

Re-Corable Coaxial Hose Heat Exchanger The pictures to the left shows our patented point of application Re-Corable Coaxial Hose Heat Exchanger used in production for validation testing. It is also a tube-in-tube heat exchanger design which allows temperature control to be added without any change in the existing material flow path.The system is flexible enough to use in robotic or manual operations and provides temperature control all the way to the gun.
View Complete Details

Sealant Equipment

The SCS Temperature Control Unit (TCU) monitors and maintains material temperature by heating or cooling during adhesive and sealant dispense operations. The TCU circulates closed-loop conditioning water through heat exchangers and ancillary components to ensure proper temperature of the material at the point-of-application. In addition to maintaining the high viscosity of sealers and adhesives, the TCU sealer system & adhesive system accommodates the parameters unique to these applications: frequent heatcool switching; lower dispense volumes at higher dispense pressure; and temperature control within non-circulating or "dead-end" protective coating systems. SCS makes accurate control in such conditions routine. Also routine are the benefits that come with temperature and viscosity control, including: minimized rework, fewer production-line stoppages, and an improved bottom line.
View Complete Details

COIL COATING SYSTEMS

coil-coating systems eliminate inconsistencies in manual viscosity measurements and adjustments by controlling viscosity with temperature. Saint Clair Systems has developed methods to measure and analyze, in real time, the temperature of coating material across the width and length of the strip, ensuring consistent film builds from edge-to-edge and head-to-tail. With the ability to control material temperature, you can ensure a stable and repeatable coating viscosity. This allows other process variables, such as roll speeds and nip pressure, to become definable and repeatable, reducing set-up time and scrap.
View Complete Details

Maple Pump

  • Series 30
The Maple 30 pump is the finishing industry's best pump solution. Contains the best air motor and the best fluid section and is the industry leader for reliable operation, simple maintenance and hydraulic efficiency. The Maple 30 operates at 3:1 ratio, delivering 12 GPM at 60 cycles per minute.

Features include:

Handles the Troublesome and Difficult Coatings- From high solids to CARC to UV as well as moisture sensitive to shear sensitive

Backup seal ensures you can keep on pumping until the next shift

Quick exhaust valve enables rapid switchover and smooth flow

Simple to Maintain- No "upper seal" to keep lubricated or adjusted

Hydraulically Efficient- Piston seals are always engaged. If the air motor is consuming air, you're moving fluid, unlike some competitive designs.
View Complete Details

Hand Lamp

  • Series MPN: EHL-120
Manufacturer: Gleason Reel
Model: Hand Lamp
MPN: EHL-120
Hand Lamp Includes:

Plastic Grip

Switch

Metal GuardReflector

Receptacle
View Complete Details

FANUC Robotics

  • Series P-205IA
FANUC Robotics P-250iA series paint robots offer the industrys best solution for your large and mid-size painting needs. In addition to providing the industrys best work envelope and motion performance, they offer many features that enable maximum throughput, optimal quality, and low operating costs. The P-250iA is designed for efficient process equipment integration with features such as a hollo wrist, an option for two motors on the outer arm for gear pumps, an outer arm designed for easy integration of paint application equipment and multiple hose routing options. The P-250iA is available in both the P-250iA 15 full-size arm and mid-size arm P-250iA 10S to right size the robo for the application. The robot can also be mounted for elevated, in-booth and clean wall floor style rails. This flexibility provides maximum use of the product in a variety of applications. An excellent replacement for manual sprayers and older automation, the P-250iA robot (with optional rail solutions) provides a reach that gives process flexibility to maintain precise target distances and gun orientations over the largest of parts maximizing quality.
View Complete Details

VISION 10 CONTROLLER

PLC Based Controller for up to 10 stations 10"" Fully Functional Touch Screen Manual or Automatic Control High, low, level alarm outputs Adjustable control values Scalable Trend Plots Additional Temperature or pH input display Converted value readout including: Zahn, Ford & Shell Cup, cPs, cSt, SSU etc.

- 10"" Fully Functional Touch Screen - Manual or Automatic Control - High, low, level alarm outputs - Adjustable control values - Scalable Trend Plots - Additional Temperature or pH input display - Converted value readout including: Zahn, Ford & Shell Cup, cPs, cSt, SSU etc.
View Complete Details

Led Lamp

  • Series LED-120-A
LED Lamp Includes:

Cushioned Hand Cap with Internal Ballast

Covered ONOFF Switch in Handle

Clear Polycarbonate Lens with Reflector Label and Cushioned Outer Ring

Produces 920 Lumens

12 Watt LEDs rated @ 50, 000 hours

One-watt LED flashlight at the end of the fixture

120 Volt, 0.65 Amps, 50-60 Hz.
View Complete Details

Precision Filter Discs

Precision Filter Discs
SFD-2000- Precision Filter Discs

High Quality 304 Stainless Steel
10 thru 150 Micron Absolute
View Complete Details

NORCROSS INVISIBLE CONTROLLER

The Norcross Invisible Controller is software which operates with any PLC that has a touch-screen interface, to provide full monitoring and control of up to 10 stations utilizing Norcross viscosity sensors. Eliminating the need for multiple controllers, this viscosity control software can provide trend plots in real-time for each station, data logging up to seven days, and permits set-point and other viscosity parameter adjustments on-the-fly. Custom installed and fully integrated into a users system, the Norcross Invisible Controller software simplifies the operator interface and creates a single report for the entire system. It is compatible with popular PLCs such as Allen-Bradley, Mitsubishi, Rockwell, and Siemens. Typical applications include printing inks, chemicals, coatings, lacquers, and adhesives. The Norcross Invisible Controller is offered to users of Norcross viscosity sensors to save them the expense of purchasing a duplicate PLC.
View Complete Details

INLINE PH SENSOR

The Norcross In-Line pH Sensor installs directly in a fluid line to monitor pH and incorporates a transmitter which converts its mV signal to 4-20 mA for transmission to a controller. Featuring a flat tip probe with a glass insert, this sensor has a patented integral reservoir which traps fluid to keep the probe tip wet during job changes and prevent drying out; a problem which often reduces or destroys the effectiveness of conventional sensors. Suitable for any process where pH is an important parameter to be measured and controlled, the Norcross In-Line pH Sensor can be used with the firms VISC and MP-2000 controllers which let operators establish a pH set-point and automatically add amine or other ingredients as required. Applications include many liquid chemical processes such as water-based printing inks, food production, pharmaceutical, and general manufacturing
View Complete Details

DYNAMITE DISPENSE VALVE

  • Series MPN: 308266C
DynaMite Dispense Valve- Improve quality and minimize rework. The DynaMite valves are used with DynaMite 190 for small-scale assembly operations.

Features include:

Precise beaddot diameter and positioning

Wetted parts are made of SST, PTFE, and acetal to provide wide fluid compatibility

Valve can be converted from manual trigger (pistol grip) actuation to fixtured automated actuation
View Complete Details

Oil Filter Systems

BGK Finishing Systems offers the industry leading technology in Oil Filter Curing Systems. Utilizing flexible, efficient, high-intensity electric infrared curing technology, BGK modular designs meet individual production specifications.
Typical system components:
Chain-on-edge conveyor
Coating booth
Cool down
Infrared oven
Rotators
Air knife station
Automatic load station
Unload station
View Complete Details

VISCSENSE VISCOSITY CONTROL SYSTEM

The ViscSense Viscosity Control system features an intuitive touch screen controller and employs a compact acoustic wave sensor that can be installed in-line within a process, regardless of orientation, to continuously monitor viscosity and temperature. Unaffected by flow or vibration, this viscosity control system has no moving parts and can measure low shear viscosities from 0-600 mPa s and temperatures to 105C, depending upon the material. Providing on-the-fly readouts in any cup value, the ViscSense Viscosity Control System is suitable for use with low viscosity coatings or inks and applications with from one to 10 stations. Compatible with any PLC, the controller operates on 24 VDC and provides 4-20 mA, RS232, and CANBUS outputs. The sensor weighs 249 grams and has a NPT pipe connection.
View Complete Details

LABPAK VISCOMETER

The Norcross LabPak Viscometer is a simple to use mechanical device which utilizes a piston to measure time-of-fall up to 20 seconds, with accuracy to within .01 second. Capable of measuring changes in viscosity as small as 0.02 CPS, depending upon the water or solvent based liquids being measured, it displays viscosity in ""Norcross Seconds"" Time-Of-Fall. Featuring a removable sleeve that accommodates samples down to 6ml, as well as larger samples in beakers, the Norcross LabPak Viscometer consists of all stainless steel wetted parts and open rod construction. Easy to clean, this laboratory viscometer works under atmospheric pressure, has a 3-way 24 VDC air valve, and requires 40 psi dry air and 100240 VAC.
View Complete Details

Viscosity Control System

  • Series VISC1000
The Norcross VISC1000 Viscosity Control System can monitor and control from 1 to 3 stations and features a touch screen interface that displays process parameters and trend data for each station. Displaying set-point, actual viscosity, alarms, and automaticmanual mode for each station, it provides real-time data logging and allows viscosity parameter changes on-the-fly. Suitable for all processes where viscosity is critical, the Norcross VISC1000 Viscosity Control System lets users change each station separately, such as air valve, solvent control parameters, set points, high-low alarms, and color-codes for ingredients. Trend plot software provides data logging for 1 hour up to 7 days and systems are available for up to 12 stations.
View Complete Details

Brake Systems

BGK's Brake Pad Systems have a modular design to meet each individual production specifications. Systems are available with up to 14 cure lanes wide and handle production rates of 10 to 100 pads per minute.
With removable sections for easy maintenance access and an oven top that raises for simplified lamp changes keep your system running at its peak. These systems provide a tough finish that meets film build and brake fluid resistance testing.Highlighted features:
Powder Booth Feed Escapement Conveyor (1-3 lanes)
Powder Coating Booth (1-3 lanes)
Walking Beam Transfer Conveyor (4-14 lanes)
Infrared Oven
Forced Air Cool Down
Exit Conveyor
Unload Station
PLC Controls with Operator Interface
View Complete Details

IR OVENS

Dryingapplied to products that have a lot of moisture, usually introduced by some previously applied chemical or coating process. In drying, the oven moves a constant stream of heated air over the products to take the moisture out
Bakingtechnique is applied to heat objects over a period of time wout drying them out and curing the coating to the part
Curinga slower process where an objectcompound is heated to give it different properties & alter its molecular structure. IR curing can provide zoned control to meet any finishing requirementpart configuration for optimum performance
View Complete Details

HEATER MODULES

BGK infrared Heater Modules use T3 quartz emitters in 1600, 2500, 3650, 3800 or 5000 watts. Emitter life is estimated at 5000 hours when operated at full lamp rated voltage; longer life can be expected when operating at a reduced voltage.
Standard infrared heater modules are available in lengths of 24", 33", 46" and 66.25" and in widths from 6-96" (in 6" increments).
Highlighted features:
Full Range Infrared
Instant OnOff
Wide Variety of Sizes
Flashing, Drying and Curing
All Coating Types
Infinitely Adjustable Power
Heavy Duty Construction
Polished Aluminum Emitter Covers
Self-Cleaning Ceramic Reflector
Applications up to 100 wattsin2
View Complete Details

FLUORESCENT HAND LAMP

  • Series MPN: FL-120
Fluorescent Hand Lamp Includes:

Protected switch

Cushioned End Cap

Polycarbonate Outer Tube and End Lens

Directed Light (from one side plus magnified from end)

Integral Ballast

13 watt, 900 lumen PLS-13 Lamp (included)
View Complete Details

Reciprocators

BGK Finishing Systems offers the time tested Binks Reciprocator. The Binks Reciprocator has been a "Work Horse" in the industry for over 50 years. With horizontal or vertical models, multiple stroke lengths and a variety of standard options, you can create a reciprocator to fit your process needs.
Highlighted (standard) features:
Horizontal and Vertical Models
Multiple Stroke Lengths
Manual or PLC Controls
Adjustable Cam Spray Control
Moveable Base (on Vertical Model)
Variable Speed (from 10-300 FPM)
Continuous Running or Reversing Stroke
View Complete Details

M51 Inline Viscometer

Use the M51 Viscosity Sensor with either solvent or water-based applications, such as printing fluid, glue and adhesives. This Inline Sensor mounts directly in the fluid line and can be used with any Norcross Viscosity Controller.
View Complete Details

SPINDLE MASTER

BGK Finishing Systems is proud to continue the Binks Spindle Master heritage with the Spindle Master II. Using chain-on-edge conveyor technology the Binks Spindle Master's compact, self-contained design is great solution for your painting process. Whether you're starting a new line or working through a conversion, BGK will make a productive and efficient difference.Highlighted features:
Adjustable Spray Gun Mounting
Compact, Self-Contained Machine
Five Standard Layouts
Simple and Quick Set-Up
Spray Booth with Exhaust Fan
Standard Spray Control Options
VFD Drives
View Complete Details

PCF METERING SYSTEM

  • Series MPN: 3A2098H
PCF Metering System- Precision Continuous Flow Metering and Dispense System. Used in conjunction with a material supply system and robotics platform, the Graco PCF Metering System assures a precise, continuous flow of material. Closed-loop technology provides real-time adjustments for changes in material temperatures, viscosities, dispense rates or robot speeds providing your operation with a highly precise, continuous dispense.

Handles a range of materials:
Ambient, warm melt and hot melt materials to 400F (204C)
Low to high viscosity materials
Unlimited volume

Features inlcude:

Advanced Display Module, Fluid Plate, Graco CAN Cable and Gateway

Closed-loop "real-time" control ensures a precise, continuous dispense improves part quality and reduces material waste

Intuitive user interface simplifies setup, reduces training time

Integrated USB interface for easy data downloads - allows for further analysis of process data

Multiple gun capabilities for additional productivity - lets you program up to four guns

Compact modular design - easy to install, integrate and maintain

Low cost of ownership - fewer wear parts compared to shot meters
View Complete Details

IR SMART LAB OVEN

Independently Controllable Infrared Heat Zones- For purposes of flexibility, the top and bottom infrared heaters are zoned independently. This is very useful when you need to duplicate a customer's oven that may have top heat only. When testing for optimal cure speeds turn on both top and bottom infrared heaters.
Accuracy and Repeatability- Repeated testing shows 2% variance on temperature. The oven controller maintains oven parameters so that uniform testing can be repeated, accurately. This oven allows you to check coating performance from batch to batch under the exact same infrared conditions.
Temperature Profile Development- As the coatings industry moves toward accelerated cure schedules, you will be able to duplicate any cure time and temperature that your customers require. The BGK IR Smart Oven will allow you to cure, record, document and make changes to virtually any coating cure parameters.
Closed Loop Temperature Controls- Rapid response infrared lamps require the speed of optical temperature measurement for consistent heat profiles. BGK has long been a leader in controlling infrared heat sources. Controls are accessed via PLC with an operator interface screen.Four modes of Operational Control
Manual
http:www.bgk.comportals0imagesmanual.gif
Enter desired % power output for the heaters. The start and stop buttons turn the heaters on and off.
TimePower
http:www.bgk.comportals0imagestimepower.gif
Enter desired % power output and the desired amount of time. The temperature the panel achieves is the variable (up to 20 steps possible).
PowerTemp
http:www.bgk.comportals0imagespowertemp.gif
Enter desired % power output and the desired panel temperature. The time it takes the panel to reach temperature is the variable (up to 20 steps possible).
TimeTemp
http:www.bgk.comportals0imagestimetemp.gif
A PID control algorithm ramps the part temperature to set-point via operator defined maximum power output rate (slow or fast). The power output required to maintain part temperature is the variable (up to 20 steps possible).
Smart Logger (OPTIONAL)- The IR Smart Oven can be equipped with the Smart Logger. This allows for creation of data files to store andor print test data.
View Complete Details

Tool Balancer Reels

  • Series SERIES "ED"
Reliable & Economical Series ED Tool Balancer Reels The economical choice for balancing tools weighing up to 5 lbs (2.3kg). Molded ABS housing has a smooth exterior with rounded edges designed for maximum ergonomic appeal. Series ED balancers are the most modern, easiest to adjust, and reliable available. Each balancer incorporates all of the important functions expected of a world class product.

Seven Ways Better:

1. Hand-windable spring tension adjustment knob is flush with the housing
2. Push-button tension release simplifies decrease of spring tension
3. Rugged steel upper swivel hook with secondary safety cable provision
4. Over-sized cable opening with direct in-line pull to reduce cable wear270 lb (121.5kg) test 0.047 (1.2mm) dia. 7 x 7 strand galvanized steel aircraft cable nylon covered to 0.063(1.6mm) O.D.
5. 270 lb (121.5kg) test 0.047 (1.2mm) dia. 7 x 7 strand galvanized steel aircraft cable nylon covered to 0.063(1.6mm) O.D.
6. Adjustable cable stop and lower safety hook
7. Matte black finish to minimize reflected light and reduce eye strain
View Complete Details

EXTRA HEAVY-DUTY BALANCER REELS

  • Series SERIES "EH"
Series EH Extra Heavy-duty Tapered Drum Tool Balancers keep tools within reach and reduce damage to tools by suspending them out of the way above the work surface. Risk of repetitive motion injury is reduced because only a light, downward force is required to place the tool in proper operating position. As the tool is lowered, and the spring is wound more tightly, the effective drum diameter increases to compensate for the increased force. Thus, when properly adjusted, the tapered drum keeps the tool at the positioned height.
Features include:

Rugged die cast aluminum housing
Both top and bottom hooks have spring-loaded safety latches
Heavy duty steel wire rope
Automatic safety catch prevents free-spooling if springs fail (not available on EH-02EH-05)
Easy adjustment with everyday tools from outside housing
View Complete Details

CAST ALUMINUM REEL

  • Series SERIES "A"
Series A- Cast Aluminum Reel- CommercialIndustrial Applications Mount on Ceiling Wall or Under Bench

Features include:

Cast Aluminum Construction

Slip Ring in Gasketed Enclosure

Durable Baked Polyester Powder Painted Finish

Unitized 20 Amp Slip Ring

Easily Accessible Gasketed Junction Box

Spool Configuration Prevents "Lock-out"

Field Adjustable Cord Guide with Four Rollers

Positive Locking Dog with Field Adjustable Disengage Feature

Maintenance Free Enclosed Power Spring

Field Adjustable Cord Stop

Type SOW Cable Included On All Reels
View Complete Details

MX LITE PUMP

  • Series MPN: MX412UC-OLT0000
The MX Lite Pump features the new Binks stainless steel MX412 pump with the Binks AA1600M Air Assisted Airless Spray Gun. Provides users with a low cost, robust industrial spray system which applies a wide range of industrial coatings an an optimum finish qualit level.

Features include:

The magnetic detent design (patented) creates a quick stroke changeover with no pulse or surge

Stainless steel system- pump, gun and hoses

Modular design for reduced maintenance and downtime

Self adjusting spring loaded packings with large sight glass for visual packing inspection
View Complete Details

HEAVY-DUTY REEL

  • Series SERIES "EG"
Series EG Heavy-duty Reels feature rugged steel construction with black polyester baked finish, reinforced hanging bracket with forged clevis for ceiling mounting and extra holes for safety chain attachment. Spring is permanently lubricated and provides constant tension, adjustable for balancing tool in normal working zone (6 - 18 in. [152-457mm]). Cable is 920 lbs (414kg) test 0.09 (2.3mm) dia. 7 x 7 strand galvanized steel aircraft cable nylon covered to 0.12 (3.0mm) O.D.
Includes safety tool clip and adjustable cable stop.

LOCKING MODELS include all features listed above plus a positive ratchet lock mechanism to allow locking of the cable at a specific height. A slight pull on the cable releases the lock which functions like a window shade. Lock feature may be disengaged externally when constant tension is required.
View Complete Details

AIR-OPERATED DOUBLE DIAPHRAGM PUMPS

  • Series HUSKY 1050
Husky 1050 Air-Operated Double Diaphragm Pumps: 1 inch Positive Displacement Double Diaphragm Pump

AODD pumps with 1 inch (25.4 mm) connection available in aluminum, polypropylene, conductive polypropylene, PVDF, stainless steel and hastelloy. Our 1 inch (25.4 mm) Husky 1050 pneumatic double diaphragm pumps feature a stall-free, low pulsation air valve which provides a smooth and rapid changeover.

Features include:
30% more efficient than the market leader
20% increase in fluid flow compared to the Husky 1040
Up to 5x longer diaphragm life compared to other double diaphragm pumps in its class
Expanded material offering to handle endless applications
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (PRP, Inc.)
  • Howell, MI 48843 map, United States
  • Share us via