Our Products

Our product range contains a wide range of BPE High Purity Fittings

Food Grade Sanitary Fittings

Pure Supply maintains a large inventory of sanitary fittings commonly used in food manufacturing processes and similar applications. These fittings are available in two different grades of stainless steel: 304L and 316L. Weld and tri-clamp ends are offered on all fitting types. Typically, weld end fittings are used on permanent installations such as clean-in-place (CIP) systems. Clamp end fittings allow for remove-ability for maintenance purposes. Clamps90 Degree Clamp End Elbows90 Degree Weld End Elbows45 Degree Clamp End Elbows45 Degree Weld End ElbowsFerrulesGasketsClamp End TeesWeld End TeesClamp End Concentric ReducersWeld End Concentric ReducersClamp End Eccentric ReducersWeld End Eccentric ReducersEnd CapsAdapter Fittings

Ask Latest Price & Details

BPE High Purity Fittings

A ferrule is the most common component in process systems. Also referred to as tri-clamp or s-clamp, the ferrule joins weld end and clamp end components. The tri-clamp end allows for remove-ability. Gaskets and clamps secure the clamp connections in place and prevent leaking. The ferrule is available in 304L SS and 316L SS and meets all FDA and 3A stainless requirements. Other diameters and lengths are available upon request. Please contact Pure Supply at (859) 581-3940 for special inquiries.

Ask Latest Price & Details

BPE Clamps

Clamps are common components in process systems and secure clamp end fittings, valves, instruments in place on the exterior of the system. The tri-clamp end allows for remove-ability. The most common clamp has a single wingnut for tightening. Two-bolt clamps are utilized for high pressure system applications. Clamps are made from 304 stainless steel. Other diameters and lengths are available upon request. Please contact Pure Supply at (859) 581-3940 for special inquiries.High Pressure 2-Bolt ClampsStandard Wingnut Clamps

Ask Latest Price & Details

BPE 90 Degree Clamp Elbows

A 90 degree elbow is an essential component in most process systems and reroutes runs of tube. The tri-clamp end allows for remove-ability. Gaskets and clamps secure the elbow in place and prevent leaking. The BPE 90 degree elbow is available in 316L SS with 20 ra (roughness average) mechanically polished or 15 ra electro polished interior finish. The fittings meet all ASME BPE requirements for sanitary processes. Other diameters and lengths are available upon request. Please contact Pure Supply at (859) 581-3940 for special inquiries.15ra Electro Polished 90 Degree Clamp Elbows20ra Mechanical Polished 90 Degree Clamp Elbows

Ask Latest Price & Details

BPE 45 Degree Clamp Elbows

A 45 degree elbow is an essential component in most process systems and reroutes runs of tube. The tri-clamp end allows for remove-ability. Gaskets and clamps secure the elbow in place and prevent leaking. The BPE 45 degree elbow is available in 316L SS with 20 ra (roughness average) mechanically polished or 15 ra electro polished interior finish. The fittings meet all ASME BPE requirements for sanitary processes. Other diameters and lengths are available upon request. Please contact Pure Supply at (859) 581-3940 for special inquiries.

Ask Latest Price & Details

BPE Gaskets

A gasket is an essential component in tri-clamp connections, designed for sanitary process providing a liquid and air tight seal. Gaskets are available in different materials ranging from PTFE (Teflon), Buna, EPDM, Viton, Silverback (composite stainless steel and Teflon), and Tefflex (PTFE and EPDM joined). Silverback and Tefflex gaskets are only available upon request. Materials vary in flexibility, temperature rating, permeability, and corrosive resistance. Product composition, CIP solutions, and process temperature dictate gasket material selection. Please contact Pure Supply at (859) 581-3940 for material specifications and special inquires.

Ask Latest Price & Details

BPE Weld Concentric Reducers

A reducer decreases line diameter and concentrates flow in process systems. Concentric reducers are cone shaped, typically used in vertical runs of tube. The weld end (commonly referred to as buttweld) is joined permanently to the process system. The BPE reducer is available in 316L SS with 20 ra (roughness average) mechanically polished or 15 ra electro polished interior finish. The fittings meet all ASME BPE requirements for sanitary processes. Other diameters and lengths are available upon request. Please contact Pure Supply at (859) 581-3940 for special inquiries.

Ask Latest Price & Details

Controlling Media Flow Valves

Valves are invaluable in controlling media flow in process and utility systems. Product flow rate, pressure, temperature, and chemical resistance determine the valve type best suited to the application. Accessories, such as seal adjusters and stroke limiters, manual overrides, proximity switches, optical position indicators and electrical position indicators, are available.

Ask Latest Price & Details

Tell Us What are you looking for? Will call you back