RAAR Group USA, Inc.

CA, United States

We are an eminent Supplier and Exporter of TOS Varnsdorf 13-15 Horizontal Boring Mill from USA. The Horizontal Boring Mills we make available feature back eliminator type construction. Our Horizontal Boring Mills have 25-ton table load capacity. Bulk orders of the Boring Mills are processed by us as per the specific requirements of the buyers.

 

Specifications :

• Capacity : 6"
• Rpm’s 10 to 1500, hp 37 kw, (50hp)
• Table Size : 72" x 98", 20 tons cap.
• Twin drive for milling on table
• X-axis : 197"
• Y-axis : 98.4"
• W-axis (column) : 78"
• Z-axis (spindle) : 31.5"
• X Trave l: 5 M, 197.4"
• Y Travel : 2 1/2 M, 98"
• Z Travel : 80"

C/W Heidenhain TNC 530 control, chiller, back eliminator-type construction, in feeding column; 25 ton table load capacity, coolant through Spindle, built-in full b-axis rotary table, simultaneous rotary milling; ball screws & independent servo drives, 20" long spindle nose support, operators platform, hardened ways, and Teleflex telescoping way covers.

Price : $795, 000.00

Voest Alpine Plate Bending Roll 1979 model 5.5 inches x 144 in Cold capacity, under poer in the USA. Customer is responsible for removal.

Preliminary Specifications:Swing Over ways: 34.6X-Axis Travel: 21.5Z-Axis Travel: 44Spindle Nose Mount Front /Rear: A1-20Spindle Bore: 10.752-Speed HeadstockSpindle Speeds: 10-600 RPMSpindle HP: 60 HPEquipped with:New Emerson Quantum MP Series Spindle Drive(8) Position Turret (4-Turning Positions, 4-Boring Positions)Heavy Duty Tail Stock / 7 Stroke26 4-Jaw Chuck35 Face PlateCoolant System/Chip ConveyorMisc. Tool HoldersAvailable Manuals/Electrical DrawingsControl: Fanuc 6TbDims: 208 L-R x 142 F-B Weight: 35, 000 lbs Approx.Price: $69, 500.00 FOB - El Monte, CA**Preparation for Domestic Shipping OnlySpecifications are intended as guidelines only and are not binding.

The company has cemented its presence among the distinguished Suppliers and Exporters of Toshiba BTD 13 R22 5.1 Horizontal Boring Mill from USA. The Horizontal Boring Mills we make available come with geared head and chip conveyor. We maintain a large stock of the Horizontal Boring Mills in our state-of-the-art warehouse. The entire range of the Boring Mills is reasonably priced by us.

 

Specifications :

• Table Size : 70.9" X 86.6"
• Table Load Capacity : 22, 000 LBS.
• Spindle Diameter : 5.1"
• Spindle Speed : 2500 RPM
• # OF Ranges : 3

• Axis Travel X - Axis : 118"
  • Y - Axis (Spindle Vertical) : 90.5"
  • Z - Axis (Table Cross) : 63"
  • W - Axis (Quill) : 27.5"
  • B - Axis (ROTARY TABLE) : .001 (360, 000)

• Rapid Feed Rate : 396 IPM
• Cutting Feed Rate : 396 IPM
• Spindle Drive Motor : 30 H.P. A.C.
• Spindle Taper : #50
• Tool Changer Capacity : 38 ATC
• Max. Tool Dia. : 9.05"
• Max Tool Length : 15.75"
• Max.Tool Weight : 44 LBS.
• Machine Weight : 81, 400 LBS.

EQUIPPED WITH :

• Tosnuc 888 Cnc Control W / Color Graphics
• Geared Head
• B-axis Table (360, 000 Positons)
• Pendant Operator Control Panel
• Spindle Chiller
• Splash and Coolant Guarding
• Coolant System
• Thru Spindle Coolant
• Chip Conveyor
• All Available Manuals

Price : $289, 500.00

We offer Toshiba CNC Boring Mill model btd-110 r16, new 2. specifications: spindle diameter: 110 mm quill diameter: 225 mm spindle taper nose: iso no. 50 spindle stroke (w): 500 mm stroke y axis: 1, 800 mm x axis: 2, 500 mm z axis: 1, 450 mm spindle rpm: 3 way 5-3, 000 rpm each automatic feed speed 1-6, 000 mmmin machine height: 4, 300 mm width: 5, 730 mm length: 6, 650 mm weight: 29, 000 kg electronic power: ac 200v 50 hz +- 10% 58 kva spindle motor: ac 1511 kw cnc rotary table size: 1, 400 mm x 1, 600 mm t slot: 22 mm max. Table load: 6, 300 kg rotation speed: 720 degreemin scale feedback b axis: 0.0001 mm rotary scale cnc control: tosnuc 888 control axis: x, y, z, w, b 5-axis simultaneously controllable axis: linear interpolation - all axis circular interpolation â�� 2 axis least input increment: 0 .001 mm 0.0001 degree max programmable dimension: plus or minus: 99999.999 mm : plus or minus: 99999.99 degree scale feedback (x, y, z, b axis) atc: 38 position tool diameter: 125 mm tool length: 400 mm max. Tool length: 400 mm mat tool weight: 25 kg. max. T-tool cutter diameter (single point): 400 mm max. Tool diameter (single point): 240 mm additional equipment: harden x, y, v axis slide way; xy axis extended stroke; spindle lock; oil mist for spindle; oil cooler for spindle bearing and motor jacket flange; lift up chi[p conveyor; oil pan for table; coolant system; teaching function; helical cutting (go203); synchronized tap; help function; manual origin measuring function; program memory 600m; add. Tool compensation total 499 sets. price: $ 429, 500.00. Fob in containers at your facility in india. may be seen under power in tokyo, japan.

We offer Okuma Mcr A5c 25 50 2008 Gantry Mill. Double column universal 5axis machining-center okuma mcr-a5c 25-50 2008 osp-p-200m between column: 2550 t: 5000 2000 x-5200 y-3000 z-650 w-1000 b-1°c-1° from table to spindle: 0½ 1345 bc axis universal head 30½ 4000rpm bt-50 atc-72 high column+400 table cross t-slot add 2(20h7) kitagawa cnc rotary table tr-400b kitagawa so-14 scroll chuck tail stock oil hole oil mist helical interpolation 360° synchronized tap lant face cutting function work coordinate 200set tool offset 300set chip conveyor.

go to the following web site:www.raargroupusa.com we have all types of industrial machinery and equipment

14 OVER ALL BENDING LENGTH12 BETWEEN HOUSINGS18 THROAT6 STROKE200 TON BENDING CAPACITYDIGITAL BLANKING (2kd) EAGLE EYEAUTOGAUGE CNC 1000 MODEL G-24 BACKGAUGEPROTECH DBM DIGITAL AIR ASSISTED CLUTCH480/3/60 VOLTFLOOR MOUNTED NO PIT REQUIREDPRICE: $26500.00LOCATION: CITY OF INDUSTRY, CA

Specifications: NEW Windows Based CNC Controller 28 individual programmable axis and feedback servos.Tension / Strain control and tangency sensors. Max Sheet width - 170 inch.Max Sheet length - 56 Feet (672 inches)S-Jaws, Curvature 55 Inch Radius min. by 170 inch width.Auxiliary Jaw Curvature - 16 Inch Radius min. by 70 Inch width.14 inch diameter extrusion Jaws, Max part length, 50 Feet (600inch) Strong back for Bull nose and deep draw forming. Jaw oscillation 15 Deg.Yoke Oscillation 15 Deg.Jaw Rotation 30 Deg.Yoke Angulations, 90 Deg. - Horizontal to Vertical Tension Cylinder Stroke- 24 Inches each side Carriage Stroke, 70 Inches with 10 Lock positions on the main rail. 3 Die tables, 2250 Ton in tandem, 152 inch stroke, 15 Degree Tilt.Center Die table 2 position, Transverse and longitudinal 1000 Ton Thrust2 Outboard Die Tables - 750 Ton thrust each.400 Ton Bulldozer, 60 Inch Stroke

We are offering Eaton Leonard Model VB75 GP Vector Bend CNC Tube Bender Left Hand Bend 34" eaton leonard #vb75 3-axis cnc mandrel type tube bender, maximum bend radius: 180° + spring back, maximum bend centerline radius: 7.5¢½½ open on clamp, bending rotation: left hand (counter-clockwise), adaptive motion cnc control system, hydraulic pressure die assist, direct acting pressure die new 1995 came from the boeing c-17 mfg. Plant in long beach, ca.

Betts Bridgeford CNC Lathe 10' Swing, 300 HP Variable Drive Headstock Under power, available for inspection in the Los Angeles area in top line aerospace shop 100" Swing, Fanuc 21i CNC Control, 300 HP BETTS Headstock 90" 4 Jaw Faceplate 40' Dual Carriage 40 Ton Capacity Between Centers Excellent Condition Yes, there

Lucas 5" CNC Table Type Horizontal Boring Mill Fanuc 11 CNC Control Travel: 103" x, 72" y, 33" z, 48" w-quill Came out of top aerospace tooling facility. Price: $110, 000 FOB your truck.

ZERO BLAST- BLAST CLEANER MODEL: BNPA200 S/N: 37669 BLAST CABINET IS 4' x 4'INDEXING TURNTABLETWO STATION INDEXING(8) NOZZLE GUNS42 DIAMETER ROTARY TABLE COMPLETE WITH RECLAIMER MODEL # 1800 & DUST COLLECTOR $14500.00

(1) Used Bridgeport/Harig Model 618 "E-Z Surf", 3-Axis CNC Surface Grinder with Full Enclosure*, New 1996Specifications:Table Working Surface - Maximum 6" x 18Longitudinal Travel - X-Axis 20"Cross Travel - Z-Axis 6-3/4"Spindle Center to Table - Maximum Height 12"Grinding Spindle Speed 3450 RPMGrinding Wheel Diameter 8"Grinding Wheel Width 1-1/4"Grinding Wheel Hole Diameter 1-1/4"Grinding Wheel Motor 2.5 HPElectrics 460/230/3/60Approximate Dimensions 70"L x 36"W x 78"HApproximate Weight 2, 250 Lbs.Equipped With: Full EnclosureEZ-Surf Model BPCG PC Based CNC Programmable Control with CRT3-Axis Automatic OperationMDI-Setup-Teach-Program & Edit2-Axis Linear & Circular InterpolationAbsolute & Incremental OperationDwell in MDI or End of StrokeRS-232 PortElectronic Handwheels on Y & Z AxesBallscrews on Y & Z AxesSpecifications and Equipment are Preliminary Subject to Buyer Verification. Sold As Is Where Is, with no implied warranty or guarantee.Price FOB your truck: $5950.00

SNK PM-6B Two Gantries 3 Spindle 5-Axis Profiler Two Gantry 3 spindle 5 axis 7000 Spindle RPM 40HP Cat 50 1440" X 120" Y 32" Z A + or - 25 Deg. B + or - 25 Deg. 40" spacing spindle to spindle Each gantry travels 1164" Fanuc 15M with Control post Installed new in 2000 Under power $1, 200, 000.00 FOB your truck Rick.

NEW 2012 Parpas Model XS-75 5 Axis High Speed CNC Gantry Mill Siemens 840D CNC Control - In Containers - Never Installed Specifications:  X Axis Travel: 275.59" - 7, 000 mm Y Axis Travel: 196.85" - 5, 000 mm Z Axis Travel: 78.74" - 2, 000 mm Distance Between Columns: 224.4" - 5, 700 mm Pallet Dimensions: 196.85"L x 165.35" W - 5, 000 mm x 4, 200 mm A Axis Rotation (TWE-TT.-C Head): +/- 110 Degrees C Axis Rotation (TWE-TT.-C Head): Continuous Maximum X Axis Feed Rate: 3, 148 IPM - 80, 000 mm/min Maximum Y Axis Feed Rate: 1, 574 IPM - 40, 000 mm/min Equipped with the Following Features: Siemens 840D 5 Axis CNC Control Parpas "Total Thermal Control System - TTCS" Thermo-Stabilized & Insulated Main Machine Structure TWE-TT 2 Axis Head w/Automatic Cartridge Changer: 24, 000 RPM, 80HP, HSK-63A Taper Spindle Included 7, 000 RPM and 15, 000 RPM Spindle Cartridges (Available at Additional Cost) 48 Position Automatic Tool Changer Thru-the-Spindle-Coolant - 585 PSi / 50 Bar Coolant System - High Flow, Flume and Wash Torque Motors - High Speed Feed Rates Optional Drilling System for Composite Material Blum - Laser Tool Pre-setter Full Machine Enclosure w/Retractable Roof Automatic Pallet Changer System w/4 Pallets Price, FOB, West Coast USA Warehouse: $POR Comes with Installation and 1 year warranty.

We are offering International Shipping

Metallurgical Coal that we offer is sourced from the trustworthy vendors of the market. We are reckoned as one of the reputed Exporters and Suppliers of Metallurgical Coal. The best thing about our Metallurgical Coal is that it is low in carbon content. When it comes to delivery, we go for those shipment modes that make possible for us to deliver orders for Metallurgical Coal within the promised time frame.

Thermal Coal is widely used as a fuel for steam locomotives. Also, it is used for generating power and heat. We are one of the prominent Suppliers and Exporters of Thermal Coal. Procured from the most reliable sources of the market, our Thermal Coal is highly demanded in the market. The final dispatch of our Thermal Coal is done using those shipment modes that ensure its timely and prompt delivery.

We are pleased to offer the following machine, subject to prior sale, for your consideration:Travel Specifications:X Axis Travel: 236.22" - 6, 000 mmY Axis Travel: 236.22" - 6, 000 mmZ Axis Travel: 78.74" - 2, 000 mm MACHINELambda SP Base MachineDEAC B6CS Control SystemDual Y-Axis Drives, Scales and ReadersStructural Temperature CompensationTESASTAR-m Probe HeadTESASTAR-mp ProbeTESA Extension Kit (50, 100 and 200mm)TESA Stylus Kit #7Calibration Sphere COMPUTER & SOFTWARE SYSTEMHP XW4600 Workstation, Intel Core 2 Duo E6550, 2Gb RAM, 160Gb HD, 16x DVD/-RW, 256Mb Graphics Card, 2 Serial Ports, 2 Ethernet Cards, Keyboard and MouseWindows XP Operating System22-inch Flat MonitorInk Jet PrinterComputer TablePC-DMIS CAD++ Measurement Software with AutoPath Bundle SoftwareDataPage RT Statistical SoftwareThis DEA Lambda CMM Gantry Measuring Machine was ordered new manufacturingcompany, and never installed.Price, FOB, West Coast USA Warehouse: $849, 000.00 USD

Mattison 120" Geared Head Vertical Spindle Rotary Surface GrinderS/N: 96-30, New 1980#96 (108) -120 Specifications: Specifications - subject to verification 144" Swing Inside Water Guards120" Diameter Magnetic Chuck66" Diameter Cortland Style Wheel Chuck48" Height Under New Set Of Segments300 H.P. Geared Head Main SpindleEquipped With:Quick Tilt HeadD. C. BrakingHydrostatic Carriage WaysVariable Hydraulic Table Speed Machine is now in a warehouse, OH PRICE: $389, 500.00 USD ON LOCATION

30 TON BRUDERER 3-POST HIGH SPEED PRESS Model: BSTA30(S/N: N/A) Bolster 21.5" x 18.375" x 2.375" 12" x 3.75" Opening Sub-Bolster 12" between Tie Bars) x 18.375" x 1.75: 6" x 2" Opening Adjustable Stroke .629" to 1.57" Shut-Height 7.5" (estimated SDAU over the Sub-Bolster) SPM: 100-600 Ram 21.5" x 18.375" 2" Locating Hole in the Center Sound CabinetCondition: Good FOB Santa Ana, CA.Price: $15, 500.00

We are a reputed Supplier and Exporter of Leblond Gap Bed CNC Lathe from USA. The CNC Lathe offered by us is manufactured in adherence with international quality standards. In order to meet the bulk and urgent requirements of the buyers, we maintain a large stock of the CNC Lathes in our spacious warehouse. Buyers can obtain the Lathe at market-leading rates from us.

 

HEADSTOCK :

• Spindle speeds, number : 36

• Spindle speeds range : 5.4-600 rpm

• Spindle diameter at bearings –front, center, rear : 8”, 6”, 4 5/16”

• Front spindle bearings, two Timken #0, outside diameter : 12 1/2”

  • Radial load at 100 rpm : 106, 800 lbs

  • Radial load at 100 rpm : 106, 800 lbs

• Center spindle bearing, outside diameter : 8 858”

  • Radial load at 100 rpm : 23, 300 lbs.

• Read spindle ball bearing, outside diameter : 7 7/8”

  • Radial load at 100 rpm : 21, 790 lbs.

• Spindle, diameter of hole, straight : 3 1/16”

• Spindle, diameter of hole, taper (No. 350 ASA) : 3 1/2”

• Spindle, size of center : #6 Morse

• Spindle nose, standard taper key drive, size : L3

• Spindle nose, diameter, large end of taper : 6 1/2”

• Headstock length on bed : 48 5/8”

 

CARRIAGE AND COMPOUND REST :

• Length on ways : 46 3/4”

• Bearing surface, square inches : 415

• Bridge width : 15”

• Cross slide travel, with taper attachment : 21 1/2”

 

GENERAL CAPACITY :

• Swing over bed and carriage wings : 36”

• Swing over cross slide : 20 ½”

• Swing over 24” wide gap : 56” (approx)

• Distance between centers (max. turning length) in increments of 24” : 156”

• Steady Rest Capacity, min. and max. diameter, standard size : 1 ¼” to 12”

• Steady Rest Capacity, min. and max. diameter, oversize : 9 ½” to 20”

• Follow rest Capacity, min, max. diameter : 1 ½” to 7”

• Face plate diameter, small (standard equipment) : 14”

• Distance, spindle center to floor : 43”

• Chuck Size : 36” 4-jaw chuck

 

Price on Location : $325, 000.00

 

New, GE Fanuc 21 iT CNC Control

 

Machine Serial Number : 3NK855

Wysong 12' X 3/8" Shear, new 1996 CUTTING LENGTH . 144" CAPACITY, MILD STEEL . 3/8" STAINLESS STEEL . 9/32" MAXIMUM RAKE OF UPPER BLADE . 5/16" BACK GAUGE RANGE . 36" SPEED . 50 S.P.M. NUMBER OF HOLDDOWN FEET . 19 HOLDDOWN FEET CENTERS . 7" TO 8" FRONT GAUGE RANGE . 48" BACK GAUGE RANGE . 36" APPROXIMATE WEIGHT . 37, 000 LBS. APPROXIMATE DIMENSIONS (WITH GAUGES): LENGTH . 240" WIDTH . 127" HEIGHT . 68" AIR ACTUATED MECHANICAL CLUTCH w/ DUAL REMOTE PNEUMATIC 36" CAPACITY FRONT OPERATED TWO-SPEED MOTORIZED BACK GAUGE 1 year old drive motor, 2011 rebuilt back gauge with new screws, bushings, bearings and nuts. 2011 converted manual back gauge to motorized with computer read out. Price: $37, 500.00

go to the following web site:www.raargroupusa.com we have all types of industrial machinery and equipment