Other Products / Services #5141486

The AIP part number 2010150-009 is provided in a conduction cooled 3-MCU ATR chassis, which supports up to two SBCs, one dedicated Radio Interface Board and a Ritec power supply. Each SBC can hold two PMC mezzanine cards. This configuration offers an IDM, a 1553 and an Ethernet Switch. The chassis is completely sealed and filtered for discreet applications. Conduction cooling is a strong suite for Ritec boasting the most Watts dissipated in a conduction cooled chassis with as much compudensity. The AIP is great for thin-air applications. It is also loaded with plenty of Gigabit Ethernet and a very robust self-contained power supply that utilizes 28 Vdc input power. The SBCs utilize Core 2 Duo Processors with 4 Gigabytes of SDRAM and 2 Gigabytes of flash memory. Gigabit Ethernet, 10100Tx Ethernet, serial, and USB IO interfaces are provided through a single ARINC 600 Series, Size 2 connector, with the Gigabit Ethernet ports provided through a Quadrax connection. A custom cPCI backplane is incorporated that provides two 6U SBC slots, one Radio Interface Board (RIB) slot, and one power supply slot. The equipment is constructed using environmental management techniques that protect internal components from the effects of shock, vibration, and electromagnetic interference. The AIP is designed for deployment in mannedunmanned rugged environments on airborne, shipboard, or ground-mobile platforms.

The FTS 2.0 is provided in a conduction cooled 3-MCU ATR chassis, which supports up to two SBCs, one dedicated RAID controller, and four SATA 2.5-inch solid state drives (SSD) with a maximum storage capacity of 4 Terabytes. The FTS 2.0 incorporates two, Gigabit Ethernet switches and a self contained power supply that utilizes 28 Vdc input power. The SBCs utilize Core 2 Duo Processors with 4 Gigabytes of SDRAM and 2 Gigabytes of flash memory. Gigabit Ethernet, 10100Tx Ethernet, serial, and USB IO interfaces are provided through a single ARINC 600 Series, Size 2 connector, with the 11 Gigabit Ethernet ports provided through a Quadrax connection. A custom cPCI backplane is incorporated that provides two 6U SBC slots, one RAID storage array (RSA) slots, and one power supply slot. The equipment is constructed using environmental management techniques that protect internal components from the effects of shock, vibration, and electromagnetic interference. The FTS 2.0 is designed for deployment in mannedunmanned rugged environments on airborne, shipboard, or ground-mobile platforms. Supports data capacity expansionDedicated RAID controller1024-bit data encryptionConduction cooled2 Gigabit Ethernet switchesGigabit Ethernet fabric switchingCompact PCI backplaneNSA certified sanitization (fast erase)HEMP and TEMPESTMCU mounting trayDiagnostic lidLab mounting tray (breakout panel)Lab cooling fins

The RDJ6940 lightweight color printer is the latest generation in the RITEC family of rugged inkjet printers deployed in military and industrial environments. The RDJ6940 provides unsurpassed print speed, photo-quality color, and the sharpest black printing available for inkjet printing technology. The printer is packaged to support the functionality and convenience of an office environment, while performing in the hostile conditions of military and industrial field operations. The standard RDJ6940 printer configuration provides both Ethernet and USB host connectivity. HP technology and mil-spec performanceUniversal power supplyNetwork and USB connectivityPrints up to 36 ppm black, 27 ppm colorUp to 4800 x 1200 dpi resolutionPaper type sensorMounting trayCustomized vibrationshock isolation systemDC power operation19" rack mount

The Model RDJ9300 is a wide-format color printer that draws upon proven Hewlett-Packard Inkjet performance and proprietary RITEC technology to form a product offering that is well suited for industrial applications or less-severe military environments. The RDJ9300 printer incorporates a reinforced mounting platform that is suited for table-top or rack mounting. A military-style power connector and data interface connector(s) are incorporated into the rear section of the mounting frame. The RDJ9300 can print any size document up to 11x17 inches (B size) and is capable of oversized prints up to 13x19 inches (super B size). Proven Hewlett-Packard technologyUniversal power supply (100-240 Vac)5, 000 page-per-month duty cycle> 15, 000-hour MTBFUSB interfaceCustom vibrationshock isolation systemMultiple mounting interfaces

The RDJ6940C lightweight color printer is the latest generation in the RITEC family of rugged inkjet printers deployed in airborne applications. The RDJ6940C provides unsurpassed print speed, photo-quality color, and the sharpest black printing available for inkjet printing technology. The printer has been selected for deployment as the hardcopy output device for the FAA aircraft fleet. The RDJ6940C is packaged to support the functionality and convenience of an office environment, while performing in the demanding conditions of airborne operations. The standard printer configuration provides both Ethernet and USB host connectivity. HP technology and rugged designUniversal power supplyNetwork and USB connectivityPrints up to 36 ppm black, 27 ppm colorUp to 4800 x 1200 dpi resolutionPaper type sensor; A4 paper supported with front door openFolding top cover for limited clearance installationsMounting trayCustomized vibrationshock isolation systemDC power operation19" rack mount

The MDSU can be provided in either a conduction cooled ATR or air cooled convection chassis. It has provisions for three SBCs, one dedicated RAID controller and twenty-four SATA 2.5 inch solid state drives (SSD). By using 128 Gigabyte drives the MDSU provides a total of 3.1 Terabytes of user storage and has a capacity of over 6.0 Terabytes once MIL-SPEC 256 Gigabyte SSDs become available in the summer of 2009. The main objective of this product line is to surpass 16 Terabytes of data storage while maintaining its dense compact size. Data to and from the SSD is accommodated through four Gigabit (GbE) ports or up to 24 GbE ports via a Gigabit Ethernet Fabric Switch. The MDSU is controlled by a Core 2 Duo Pentium Processor with four Gigabytes of SDRAM through the CPCI bus. The MDSU works on the ground in rugged mobile environments and in the thin air altitudes of airborne applications. Future Data Capacity > 16 TerabytesDedicated SBC RAID ControllerConduction Cooled with Proprietary Thin Air Cooling3 CPCI Slots Stationary All Memory is Removable6.0 Terabytes Storage with 256 Gigabyte SSDs4 to 24 GbEthernet PortsSystem Health ManagerHardware & Software Drive Sanitization AvailableCompact PCI BackplaneChassis Power Supply Temprature MonitoringBuilt in TestExtended Operating Temperature RangeMIL-STD-461464 EMIEMC1024 Bit Data Encryption with Erasable KeyHEMP & TEMPESTARINC Mounting TrayMIL-STD-1275 OptionThree 6U Core 2 Duo CPUsGigabit Ethernet Fabric SwitchingAdditional Memory Modules Sold SeparatelyTransit Case