Our Products

Sheet Metal Electrical Enclosure 6 Products available
Industrial Air Conditioner & Devices 6 Products available
Adaptors, Plugs And Sockets 5 Products available
Cables And Wire Accessories 3 Products available
Laptops, Computers & Mainframes
2 Products available
- Hygienic Design PC Enclosure Systems
- PC Enclosure Systems
Metal Box
2 Products available
- Junction Boxes JB Stainless Steel
- Pushbutton Boxes PB Stainless Steel
Commercial Air Conditioner
2 Products available
- TopTherm Chillers 1 - 6 KW
- Therm Chillers
Primer Paint
1 Products available
- Single-component Primers
Hardware Fittings And Accessories
1 Products available
- Base Plates
Surveying Instruments
1 Products available
- Width Divider
Others Products 41 Products available

Our Products

Leading Manufacturer, Supplier & Retailer of CS Wall-Mounted Housings, Vario rack-mounted fan, Roof-Mounted Fans, Trim Panel CM, TP and Base Plate Modules.

HD Connection Components

Model Number HD 4000.066

The HD connection components provide a hygiene-compliant solution for connecting two housings with integrated cable management.

View Complete Details

Ask Latest Price & Details

Roof-Mounted Fans

Voltage 115 V, 1~, 50 Hz/60 Hz
Model No. SK 3164.115
Air throughput 1500 m³/h (882.9 cfm)

Roof-mounted fan for the office sector with minimal noise level (40 dB) and high volumetric flow (unimpeded air flow 1500 m3h).

View Complete Details

Ask Latest Price & Details

Trim Panel CM, TP

Model Number CM 5001.130
Height 24.5 mm (0.96 ˝)
Width 600 mm (24 ˝)
depth 400 mm (16 ˝)

To cover the entire base opening for CM or the entire roof opening when using TopConsole pedestals on their own.

View Complete Details

Ask Latest Price & Details

Base Plate Modules

Model Number DK 7825.360
Width 600 mm (24 ˝)

Base plate module, vented for TS, TS-IT, SE, for use in network enclosure base frames. To replace an existing base plate of the same depth.

View Complete Details

Ask Latest Price & Details

Pressure Relief Stoppers

Model Number SZ 2459.500
Material Polyamide

Pressure relief plug with integrated sealing membrane, specifically for exposure to changing climatic conditions (e.g. with outdoor siting).

View Complete Details

Ask Latest Price & Details

Condensate Discharge

Model Number SZ 2459.000
Material Polyamide

Condensate outlet for reliable condensate discharge from the inside and protection against splashed water from the outside (labyrinth effect).

View Complete Details

Ask Latest Price & Details

Enclosure Internal Fan

Model Number SK 3108.115
Voltage 115 V, 1~, 50 Hz/60 Hz
Air throughput 160 m³/h

To prevent hot spots inside the enclosure and facilitate the ventilation of active enclosure climate control components.

View Complete Details

Ask Latest Price & Details

Vario Rack-mounted Fan

Model No. SK 3357.100

Guide frame for Vario rack-mounted fan: Installed directly in the subrack, using one or two mounting brackets on the 19" mounting level.

View Complete Details

Ask Latest Price & Details

Connection Console

Model Number CP 6206.490
Color Console, lid: RAL 7024 Cable entry grommets: RAL 7035

For rear connection of slimline command panels. Removable cover for simple cable routing Removable cover for simple cable.

View Complete Details

Ask Latest Price & Details

Support Section CP 180 Open

Model Number CP 6218.150
Length 500 mm (20 ˝)
Height 160 mm (6.3 ˝)
Width 90 mm (3.5 ˝)

Attached to the connection components with 4 self-tapping screws in the screw channel. May be cut to any required length, no thread-tapping required. Open cable duct for easy servicing access and for pre-assembled cables with connectors; lockable via cover profile. X-shaped profiling for greater load capacity, large cable routing channels. Upper channel suitable for cables with large connectors (e.g. DVI or VGA) and availableusable throughout the entire system.

View Complete Details

Ask Latest Price & Details

Op-mounted Joint CP 180 Horizontal Outlet

Model Number CP 6218.700

For swivel mounting of the support arm system on a horizontal surface also suitable for ceiling mounting. Removable cover for easy cable routing.

View Complete Details

Ask Latest Price & Details

Angle Piece

Model Number CP 6218.600

For connecting horizontal and vertical support arm components. Removable covers for easy cable routing.

View Complete Details

Ask Latest Price & Details

CS Wall-Mounted Housings

Model Number CS 9791.015
Height 522 mm (21 ˝)
Width 370 mm (15 ˝)
Depth 210 mm (8.3 ˝)

Outdoor housings for wall or pole mounting. Enclosure-within-an-enclosure concept, outer enclosure with cut-out at the bottom and integrated louvers on the rear and side panels for ventilation

View Complete Details

Ask Latest Price & Details

Junction Boxes JB Stainless Steel

Model No JB 8018.134
Height 100 mm (3.9 ˝)
Width 100 mm (3.9 ˝)
Depth 75 mm (3 ˝)

The JB enclosure offers protection for dense wiring and sensitive small instruments. These hinged cover junction boxes combine the advantages of the AE and KL series at an economical cost. Features include 180 degree hinge and slotted insert quarter turn latch. Foamed-in-place gasket and a knife-edge perimeter add extra protection.

View Complete Details

Ask Latest Price & Details

Fan Tray

Model No. DK 7968.035
Voltage 230 V

Can be retro-fitted from above in all TS 8 network enclosures. The rear section is left free for cable entry. Two fans as standard. Can be increased to max. 46 fans.

View Complete Details

Ask Latest Price & Details

Base Plates

Model No DK 5502.510
width 800 mm (31 ˝)
depth 600 mm (24 ˝)

Potential equalization via assembly components and grounding points are available . The base plate is set to cover the entire base opening.

View Complete Details

Ask Latest Price & Details

Quick-fit Baying Connector

Model No TS 8800.500

Simply attach the screws, insert the quick-release baying connector, tap in with a hammer and secure.

View Complete Details

Ask Latest Price & Details

Baying Brackets

Material Carbon steel
Model No TS 4582.500

To provide additional stabilization, or in cases where mounting plate brackets, pivoting frame or busbar support prevent the installation of angular baying brackets.

View Complete Details

Ask Latest Price & Details

Self-adhesive

Model No. SZ 2573.000

To seal the cable entry between the base plates, particularly suitable for cables with identical cross-sections.

View Complete Details

Ask Latest Price & Details

PC Enclosure Systems

Model No PC 5386.000
Height 1600
Width 800
Depth 636

Secure accommodation of all PC components, from monitors, to PCs, to keyboards. For ultimate ease of operation in a contemporary design. Complete protection from humidity and dirt, temperature fluctuations and unauthorized access.

View Complete Details

Ask Latest Price & Details

Upport Section CP 180 Solid

Model No. CP 6218.050
Length 500 mm (20 ˝)
Height 160 mm (6.3 ˝)
Width 90 mm (3.5 ˝)

Attachment to the connection components with 4 self-tapping screws in the screw channel. May be cut to any length required, no thread-tapping necessary. Closed cable duct with a large cross-section.

View Complete Details

Ask Latest Price & Details

CP 180 Coupling

Model No. CP 6218.300

For swivel mounting the housing on the vertical section of the CP 180 support arm system.180 for support arm connection 130 mm

View Complete Details

Ask Latest Price & Details

Metal Gland Plates Metric Knockouts

Model Number SZ 2560.400
Width 160 mm
Version Solid
plate size 1
Depth 70 mm

As a sparereplacement part for flange plates supplied loose as standard, protection category IP 66 when mounting in the usual position at the bottom.

View Complete Details

Ask Latest Price & Details

Width Divider

Model Number TS 8800.200

Width divider, divides 1200 mm wide TS and SE enclosures into two halves in the base assembly, to enable different configurations.C

View Complete Details

Ask Latest Price & Details

Plastic Cable Gland Plates

Width 330 mm
Model No. SZ 2561.500
size 3
Depth 90 mm

Pierce the plastic and pull through the cable. With protection category IP 65 when the cable is pulled through carefully.

View Complete Details

Ask Latest Price & Details

Metal Gland Plates

Width 221 mm
Model No. SZ 1581.100
Depth 90 mm
plate size 2

Simply knock out the holes for the cable glands with a screwdriver. Protection category IP 66 is achieved when mounting in the usual position at the bottom.

View Complete Details

Ask Latest Price & Details

Air Water Heat Exchangers Wall-mounted HD

Voltage 230 V, 1~, 50 Hz/60 Hz
Model No SK 3214.700
Total cooling output L35 W10 200L 0.6 kW (2047 BTU)
Total cooling output L35 W10 400 0.65 kW (2217 BTU)

Airwater heat exchanger for production areas in the food and beverage industry where hygiene is important - the perfect addition to the Rittal Hygienic Design range. The easy-to-clean design reduces the risk of contamination and ensures food safety.

View Complete Details

Ask Latest Price & Details

Fitting G

Model Number SK 3201.900

The G 38 internal threaded adaptor can be used to create fixed piping on the airwater heat exchanger for both the inlet and return.

View Complete Details

Ask Latest Price & Details

RiDiag

Model Number SK 3159.300

For the diagnosis, maintenance and long-term data capture of TopTherm units using the e-Comfort controller. RiDiag logs equipment data and prepares an error list.

View Complete Details

Ask Latest Price & Details

Single-component Primers

Color Dark gray
Model No. SZ 2436.800
Content 12 ml

Single-component primers are ideal to protect against corrosion in areas where the paint has been removed due to cut-outs or similar. This serves to re-create corrosion resistance in the paint-free area. The primer satisfies the requirements of standard IEC 61439 for low-voltage and switchgear assemblies.

View Complete Details

Ask Latest Price & Details

Therm Chillers

Voltage 400 V, 3~, 50 Hz
Model Number SK 3335.790
Total cooling output W10 U32 6.5 kW (22178 BTU)
Total cooling output W18 U32 8 kW (27297 BTU)

TopTherm chillers in TS housing with a minimal base area can be integrated perfectly into an enclosure suite. Their modular design and the fact that there is one version for two frequencies mean that the chillers are very flexible. In addition, they are convenient to service and reliable, thanks to icing protection.

View Complete Details

Ask Latest Price & Details

TP Consoles

Model Number TP 6746.500
Height 973 mm (38 ˝)
Width 600 mm (24 ˝)
Depth 400 mm (16 ˝)

TP consoles, ready-to-use unit with high protection category IP 55 in four different widths. Tool-free assembly of lid with lid stay. Compatibility with TS 8 system accessories, such as a baseplinth and cable entry grommets.

View Complete Details

Ask Latest Price & Details

LCP Rack Units

Model No. SK 3311.238
output 10/20/30 kW
Voltage 208 V

For the highest density installations, these LCP Rack units totally control the air path for efficient cooling. The LCP Rack CW is a closed loop system and units are scalable from as low as 10kW to as high as 60kW with all the most requested stops in between. These new, more powerful units in the line maintain the 12-inch wide footprint making it possible, in some situations, to double the cooling capacity without taking up additional floor space.The units high-efficiency fans have been moved to the front of the LCP on the cool side away from maximum heat which will extend the life of the fans. Water connections are available at either the top or bottom of the unit.

View Complete Details

Ask Latest Price & Details

Vent Attachment TS

Model Number TS 8801.380

The passive TS vent cap fits precisely onto the cut-outs for TopTherm roof-mounted cooling units. Can also be mounted on any roof surface of sufficient size.

View Complete Details

Ask Latest Price & Details

Comfort Panel

Model Number CP 6372.541
Height 400 mm (16 ˝)
Width 520 mm (20 ˝)
depth 74 mm (2.9 ˝)

Aluminum housing, high thermal conductivity for optimum passive heat dissipation. Low weight coupled with high stability. Protection category IP 65 to IEC 60 529.

View Complete Details

Ask Latest Price & Details

Hygienic Design PC Enclosure Systems

Model No HD 4000.062
Heigh 692 mm (27 ˝)
Width 810 mm (32 ˝)
Height 848 mm (33 ˝)
Depth 266 mm (10 ˝)

The HD modular production data enclosure provides secure accommodation for all PC components, from the monitor and screen to the printer, in hygienically sensitive areas that are subjected to regular cleaning. The HD modular production data enclosure is therefore the ideal solution for data traceability in the food industry.

View Complete Details

Ask Latest Price & Details

Pushbutton Boxes PB Stainless Steel

Model No. PB 8017.714
diameter 30.5 mm
Height 88 mm (3.5 ˝)
Width 82 mm (3.2 ˝)
Depth 69 mm (2.7 ˝)

The NEMA rated PB series pushbutton box enclosure is designed for indoor use to house pushbuttons, selector switches, and pilot lights. This enclosure protects equipment from dirt, dust, sprayed water, oil, and coolants.

View Complete Details

Ask Latest Price & Details

Operating Housing Desktop TFT

Model Number CP 6321.000
Height 450 mm (18 ˝)
Width 650 mm (26 ˝)
Depth 155 mm (6.1 ˝)

Integrated VESA 75100 mount. Effective and attractive protection for commercially available desktop TFTs up to 24" in 16:916:10 formats. High protection category of IP 65.

View Complete Details

Ask Latest Price & Details

RiMatrix S Standard Security Room

Model No DK 7998.607

The standardized data center at your premises is equipped with an additional security room feature (room-within-a-room) to provide additional protection from fire, water and smoke.

View Complete Details

Ask Latest Price & Details

Operating Housing With Handle Strips

Model Number CP 6320.000
Height 200 mm (7.9 ˝)
Width 300 mm (12 ˝)
Depth 155 mm (6.1 ˝)

Command panel with handle strips in contemporary design of sheet steel, with 130 mm support arm cut-out to fit CP 60120180 support arm system, service access optionally from the front or rear, aluminum front panel easily removable for machining, protection category IP 55

View Complete Details

Ask Latest Price & Details

Wall-mounted Enclosures EL Mounting Angles

Model No. DK 7709.735
Height 9 U (9 U)
Installation depth 520 mm (20 ˝)

Wall-mounted housing 3-part, pre-configured with: Solid flange plate, top, with brush strip at the bottom, mounting rails, C rails, outlet filter, ground rail, wall-mounting bracket

View Complete Details

Ask Latest Price & Details

Aisle Containment

Model No SK 7999.922

Door and roof components separate hot and cold air in the data center. Increases the efficiency of the climate control systems. Can be used as a hot or cold aisle partition

View Complete Details

Ask Latest Price & Details

Consoles For 3-Part Assembly

Model Number TP 6720.50
Height 700 mm (28 ˝)
Width 600 mm (24 ˝)
Depth 240 mm (9.4 ˝)

Four widths offer the ideal conditions for individual monitoring and a three-piece configuration of the TopConsole system.

View Complete Details

Ask Latest Price & Details

Cable Routing Bars For Universal Use

Model Number DK 7111.212

For structured routing of entire cable bundles, all-round attachment for universal use, connection comb.

View Complete Details

Ask Latest Price & Details

Leveling Feet For TS

Model Number SO 2859.000
. Height 100 mm.

Mounted on TS, SE and PC enclosures, for easier floor cleaning and to compensate for floor irregularities of 15 mm. Height 100 mm.

View Complete Details

Ask Latest Price & Details

Hinges For Side PaneL

Model No. TS 8800.110

The 180 opening angle allows unhindered access. Can be installed optionally from the inside or outside of the enclosure. A hinge can be used in place of three enclosure panel holders. The enclosure retains the same protection category when a hinge used.

View Complete Details

Ask Latest Price & Details

Twin Castors

Model Number CP 6148.000
Load per component 75 kg (165.3 lb.)

M12 x 20 fastening screw thread. For: TS 8 baying system, SE 8 free-standing enclosure system, PC enclosure system, pedestal base plate, 6106.2006106.300 pedestal, TopConsole pedestals, Industrial Workstations, Data Rack

View Complete Details

Ask Latest Price & Details

HD Leveling Feet

Model Number HD 4000.240

HD leveling feet to minimize cleaning time thanks to fully covered, permanently sealed thread. Also compensates for floor inclines of up to 10 thanks to the flexible base plate. Design to EHEDG standards.

View Complete Details

Ask Latest Price & Details

CMC III Processing Units

Model No DK 7030.000
Number of sensors 32
system 2 x RJ45 CAN bus

The Processing UnitCompact is the central unit in the CMC III monitoring system. Up to 324 external sensorsCAN-Bus connection units can be connected to the integral sensors. The unit can be connected to the data network via Ethernet, configured via WebUSB, alarms can be sent via an e-mail server and the unit can be connected to the company Network Management System via SNMP.

View Complete Details

Ask Latest Price & Details