ROCO International LLC

Davidson, United States

Our Industrial Shoe Sole Cleaner is a key component in your contamination control efforts. Available as an Infloor and Upfloor model, the motorized counter rotating brush belts provide excellent cleaning with maximum stability for users. The equipment is available in three cleaning modes; Dry, water, and disinfection cleaning.

Additional Details :
Automated Boot And Shoe Sanitizing Systems

• Permanent in-floor and up-floor boot cleaning
• Wet and Dry Cleaning
• Can be adapted for fork lifts
• Unique counter-rotating brush cleaning system
• Quiet (55 dB)
• Wide application range: food, pharmaceutical, automotive, chemical, electronic industry and general industry

Industrial Shoe Sole Cleaner Infloor/Upfloor Features

• Permanent In-floor and Up-floor installation
• Counter-rotating brush strips are self cleaning and provide safe standing
• Brushes provide resistance automatically to each shoe sole/machine wheel
• Stainless steel construction
• Motion sensor activation
• Easy to clean
• Ingoing/outgoing movement on same unit
• Hand disinfection devices available
• Two-year warranty (can be extended to four years)

Technical Data Premium Infloor :

• Power supply : 380V 50Hz or 208 V/460V 60Hz three phase
• Noise : 55dB/1m
• Brush velocity : 20 m/s; 4000 fpm
• Brush material : PA6.6 nylon
• Enclosure rating : waterproof NEMA 4X (IP65)
• Motion sensor activated
• Material : stainless; corrosion and chemical resistant
• CE certificate; CE user’s manual

The Differential Pressure Gauge (Series S2000) is a low cost mechanical gauge with aluminum housing for monitoring positive, negative, or differential pressure.

Additional Details : The Series S2000 differential pressure gauges are low cost, diaphragm operated, mechanical differential pressure gauges that may be used in all applications where the Dwyer® Magnehelic® brand gages may be used. The Sensocon® Series S2000 differential pressure gauge can be used in applications for measuring positive, negative, or differential pressure with an accuracy of 2%. Standard applications include monitoring filter status, duct static pressure, room pressure, fan or blower pressure, paint booths, dust collectors, and cabinet purging along with many others.

The low cost, diaphragm-operated Differential Pressure Gauge Series (S-5000) is well appreciated for its reliability and high-end performance by the global clients.

Applications :

• The S-5000 can be used in applications for measuring positive, negative, or differential pressure with an accuracy of 5%.
• Standard applications include monitoring filter status, duct static pressure, room pressure, fan or blower pressure, paint booths, dust collectors, and cabinet purging along with many others.

The Series A1 Digital Differential Pressure Gauge is a patent pending microprocessor based digital pressure gage for positive, negative, and differential measurement designed to be a direct replacement for mechanical gauges.

Additional Information :

• The Series A1 Digital Differential Pressure Gauge is a patent pending microprocessor based digital pressure gage for positive, negative, and differential measurement designed to be a direct replacement for mechanical gauges.
• The Series A1 digital differential pressure gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%.
• For applications requiring better accuracy, the A1 is also available with 0.5% or 0.25% accuracy.
• The A1 pressure gauge also has an optional 4-20 mA output for applications requiring an output signal.
• The A1 features a bright ½" LED display, which gives the gauge improved readability and precision.
• The A1 digital differential pressure gauges also feature 5 user selectable engineering units including in. w.c., mm w.c., cm w.c., kPa, and Pa.
• The Series A1 offers an improved look, and performance compared to mechanical gauges.

The Series A2 digital differential pressure gauge is a patent pending microprocessor based digital pressure gauge for positive, negative, and differential measurement designed to be a direct replacement for mechanical gauges.

Additional Information :

• The Series A2 digital differential pressure gauge is a patent pending microprocessor based digital pressure gauge for positive, negative, and differential measurement designed to be a direct replacement for mechanical gauges.
• The Series A2 differential pressure gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%.
• For applications requiring better accuracy, the A2 is also available with 0.5% or 0.25% accuracy.
• The A2 digital differential pressure gauge also has an optional 4-20 mA output for applications requiring an output signal.
• The A2 features a bright ½" LED display and process arch, which gives the gauge improved readability and precision.
• The A2 digital differential pressure gauges also feature 5 user selectable engineering units including in. w.c., mm w.c., cm w.c., kPa, and Pa.
• The Series A2 offers an improved look, and performance compare to mechanical gauges

The Series A4 digital differential pressure controller is a patent pending microprocessor based pressure controller for positive, negative, and differential pressure as well as velocity and flow.

Additional Details : The SeriesA4 digital differential pressure controller   is a patent pending microprocessor based   pressure controller   for positive, negative, and differential pressure as well as velocity and flow. The   Series A4 differential pressure controller   includes (2) 8A SPDT relays and an associated   programming menu that allows full configuration of variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user-friendly menu on the OLED display or uploaded using an   Opti Link™ programming key. The OLED also displays the exact setpoints or other user defined variables during normal operation. Furthermore, the menu structure can be customized by moving variables to different menu levels to accommodate many applications. Compared to other mechanical products, the   Series A4 digital differential pressure controller   has a significantly reduced depth, an improved look, and better performance at a similar price.

The Series VTP Multi Range Air Velocity Transmitter can simultaneously display and output Air Velocity, Temperature and Pressure (optional). This is the first product to combine all 3 variables in one transmitter making the VTP an exceptional option for multi-variable measuring.

Additional Details : The Series VTP Multi Range Air Velocity Transmitter can simultaneously display and output Air Velocity, Temperature and Pressure (optional). This is the first product to combine all 3 variables in one transmitter making the VTP an exceptional option for multi-variable measuring. The VTP utilizes an industrial 316 Stainless Steel armored RTD sensor as the thermal air velocity measuring component. Using a fully protected 316 SS sensor drastically extends the life of the air velocity sensor and also makes it insensitive to water, dust or corrosion. The VTP comes standard with a LCD and can simultaneously display air velocity, temperature, and pressure.
The VTP is easily configured or adjusted in the field with the digital display and keypad.  The Air Velocity Range and Pressure Range are both field adjustable as well as units of measure. Other adjustable parameters include signal dampening and low velocity cut off point. The VTP Air Velocity Transmitter can also be configured to measure and totalize flow in CFM or M3/h by entering the duct area where the measurement is taken.
Installation of the VTP Air Velocity Transmitter is easy with the adjustable depth, removable flange. The standard product includes an integral design, but is also available with a remote mounted probe to accommodate any application 10. Digital Differential Pressure Controller

The Series JFM-S FloSen® Airflow Measuring Stations provide accurate, repeatable measurement of air movement in HVAC ducts. The Probes patented elliptically shaped sensor design with improved aerodynamic characteristics outperforms more traditional devices, and overcomes loss of accuracy caused by fluid separation at the sensor body. The elimination of separation results in a stabilized static pressure signal, helping to eliminate “hunting” during fan control.

Additional Information :The Series JFM-S FloSen® Airflow Measuring Stations provide accurate, repeatable measurement of air movement in HVAC ducts. The Probes patented elliptically shaped sensor design with improved aerodynamic characteristics outperforms more traditional devices, and overcomes loss of accuracy caused by fluid separation at the sensor body. The elimination of separation results in a stabilized static pressure signal, helping to eliminate “hunting” during fan control.

The Series 212 Weatherproof Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send a corresponding 4-20 mA or 0-10 V output signal.

Additional Information :

• The Series 212 Weatherproof Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send a corresponding 4-20 mA or 0-10 V output signal.
• The Series 212 Weatherproof Differential Pressure Transmitter is designed with an IP 65 enclosure and can be easily mounted to any flat surface.
• The Series 212 is not position sensitive and can be mounted in any orientation without compromising accuracy.

The Series AFS is a differential pressure air velocity sensor designed to measure average air velocities in VAV terminal units and HVAC ductwork.

Additional Information :

• The Series AFS is a differential pressure air velocity sensor designed to measure average air velocities in VAV terminal units and HVAC ductwork
• It has an aero-dynamic elliptical shape resulting in a minimum pressure drop and amplified differential pressure signals which allow accurate measurement of air velocities from 300 fpm to 5000 fpm (1.5 m/s to 20 m/s).
• It includes multiple sensing points aligned in line grooves to measure total and static pressure.
• It is easy to install and cost effective.
• Series AFS Airflow Sensors are perfect for VAV Retrofits.

The Series JFM-P FloSen® Airflow Meassuring Probes provide accurate, repeatable measurement of air movement in HVAC ducts.  Its patented elliptically shaped sensor design with improved aerodynamic characteristics outperforms more traditional devices, and overcomes loss of accuracy caused by fluid separation at the sensor body.

Additional Information :  The Series JFM-P FloSen® Airflow Meassuring Probes provide accurate, repeatable measurement of air movement in HVAC ducts.  Its patented elliptically shaped sensor design with improved aerodynamic characteristics outperforms more traditional devices, and overcomes loss of accuracy caused by fluid separation at the sensor body.  It is designed to maintain a constant parallel airflow pattern over the static sensing ports for more accurate, steady signals under all duct conditions.  The elimination of separation results in a stabilized static pressure signal, helping to eliminate “hunting” during fan control.
FloSen® Airflow Probes utilize a unique in-line groove for total pressure sensing and dual ports for static pressure sensing which produces a higher differential pressure for very low velocity measurements. The total and static pressure measuring points are distributed for equal-area averaging of flows resulting in improved accuracy and reliability. This design permits accurate and stable measurement in highly turbulent flow locations with directional pitch and yaw varying up to 20 degrees without the need for airflow straighteners which restrict airflow and can easily become clogged. The elliptical shape of the FloSen® Airflow Probes allows air to glide unrestricted around the aerodynamically designed sensors and offers the lowest pressure drop of any airflow measuring device available minimizing HVAC operating costs.
The FloSen® Airflow Probes have been designed for easy installation and maintenance. The insertion-style probes can be completely installed from outside the duct. The quantity of FloSen® Airflow Measuring Probes selected for each duct size is based on ASHRAE and AMCA standards to produce assured airflow measuring accuracy over a flow turn-down ratio of 17:1.

Our Shoe Sole Cleaner is a key component in your contamination control efforts. Available as the Basic Shoe Sole Cleaner with dry cleaning mode and the Professional Shoe Sole Cleaner with disinfection. The motorized counter rotating brush belts provide excellent cleaning with maximum stability for users.

Application Range :

• Basic Shoe Cleaning

• Basic Dry

• Professional Shoe Cleaning

The Jeti AirShower is an all-stainless step-in cubicle equipped with a high-speed fan and HEPA filter that sanitizes the clothing an employee is wearing when he or she moves from one part of the plant to another. Available as the Z-250 for cleanrooms and Z-260 for Industrial applications.

The Series 251 wet/wet differential pressure transmitter utilizes a differential pressure sensing technology that offers 0.25% accuracy with static operating pressures up to 1000 PSI.

Additional Information :

• The Series 251 wet/wet differential pressure transmitter utilizes a differential pressure sensing technology that offers 0.25% accuracy with static operating pressures up to 1000 PSI.
• The Series 251 features 316 stainless steel construction designed to meet NEMA 4X (IP 65) standards.
• The transmitter also offers exceptional field flexibility with a 5:1 turn down and comes standard with a certificate of calibration.