Wood And Lumber #5146463

AerFilm LHR is the original low-heat-release, low-smoke and low-toxic-gas, thin-film decorative laminate. Engineered to cover both flat and three-dimensional panels, AerFilm LHR is lightweight and economical, while providing superior texture retention and stain resistance. Product Features Integrally colored base provides excellent damage resistance and panel protection;helps minimize the aesthetic appearance of scratches and damaged areas. Approved and in use by all major aircraft manufacturers worldwide. These products have been thoroughly tested to the most stringent requirements and have been fully qualified. Capable of forming onto three-dimensional parts. AerFilm LHR can also be used on flat or single-contoured substrates. Capable of continuous geometric designs on roll goods up to 60 (1.52 m) wide. Continuously laminated and embossed roll goods, or press-laminated and embossed sheets available. Unlimited custom color, texture and design availability is ensured and backed up by Schnellers well-equipped and experienced Design and Color Matching staffs. Heat-activated or pressure-sensitive adhesive provides the versatility needed to satisfy all application requirements. Superior texture retention during heat application and forming ensures that covered panels maintain their low-gloss, non-plastic look. Stainsolvent-resistant top facing makes AerFilm LHR more cleanable and maintainable.Compliant with FAA Heat Release and Smoke Density requirements as per 14CFR 25.853 (a) and (d) and major aircraft manufacturers toxicity specifications. Integrally colored base provides excellent damage resistance and panel protection;helps minimize the aesthetic appearance of scratches and damaged areas.Approved and in use by all major aircraft manufacturers worldwide. These products have been thoroughly tested to the most stringent requirements and have been fully qualified. Capable of forming onto three-dimensional parts. AerFilm LHR can also be used on flat or single-contoured substrates. Capable of continuous geometric designs on roll goods up to 60 (1.52 m) wide. Continuously laminated and embossed roll goods, or press-laminated and embossed sheets available. Unlimited custom color, texture and design availability is ensured and backed up by Schnellers well-equipped and experienced Design and Color Matching staffs. Heat-activated or pressure-sensitive adhesive provides the versatility needed to satisfy all application requirements. Superior texture retention during heat application and forming ensures that covered panels maintain their low-gloss, non-plastic look. Stainsolvent-resistant top facing makes AerFilm LHR more cleanable and maintainable.Compliant with FAA Heat Release and Smoke Density requirements as per 14CFR 25.853 (a) and (d) and major aircraft manufacturers toxicity specifications. Integrally colored base provides excellent damage resistance and panel protection;helps minimize the aesthetic appearance of scratches and damaged areas.Approved and in use by all major aircraft manufacturers worldwide. These products have been thoroughly tested to the most stringent requirements and have been fully qualified. Capable of forming onto three-dimensional parts. AerFilm LHR can also be used on flat or single-contoured substrates. Capable of continuous geometric designs on roll goods up to 60 (1.52 m) wide. Continuously laminated and embossed roll goods, or press-laminated and embossed sheets available. Unlimited custom color, texture and design availability is ensured and backed up by Schnellers well-equipped and experienced Design and Color Matching staffs. Heat-activated or pressure-sensitive adhesive provides the versatility needed to satisfy all application requirements. Superior texture retention during heat application and forming ensures that covered panels maintain their low-gloss, non-plastic look. Stainsolvent-resistant top facing makes AerFilm LHR more cleanable and maintainable.Compliant with FAA Heat Release and Smoke Density requirements as per 14CFR 25.853 (a) and (d) and major aircraft manufacturers toxicity specifications. Integrally colored base provides excellent damage resistance and panel protection;helps minimize the aesthetic appearance of scratches and damaged areas.Approved and in use by all major aircraft manufacturers worldwide. These products have been thoroughly tested to the most stringent requirements and have been fully qualified. Capable of forming onto three-dimensional parts. AerFilm LHR can also be used on flat or single-contoured substrates. Capable of continuous geometric designs on roll goods up to 60 (1.52 m) wide. Continuously laminated and embossed roll goods, or press-laminated and embossed sheets available. Unlimited custom color, texture and design availability is ensured and backed up by Schnellers well-equipped and experienced Design and Color Matching staffs. Heat-activated or pressure-sensitive adhesive provides the versatility needed to satisfy all application requirements. Superior texture retention during heat application and forming ensures that covered panels maintain their low-gloss, non-plastic look. Stainsolvent-resistant top facing makes AerFilm LHR more cleanable and maintainable.Compliant with FAA Heat Release and Smoke Density requirements as per 14CFR 25.853 (a) and (d) and major aircraft manufacturers toxicity specifications. Integrally colored base provides excellent damage resistance and panel protection;helps minimize the aesthetic appearance of scratches and damaged areas.Approved and in use by all major aircraft manufacturers worldwide. These products have been thoroughly tested to the most stringent requirements and have been fully qualified. Capable of forming onto three-dimensional parts. AerFilm LHR can also be used on flat or single-contoured substrates. Capable of continuous geometric designs on roll goods up to 60 (1.52 m) wide. Continuously laminated and embossed roll goods, or press-laminated and embossed sheets available. Unlimited custom color, texture and design availability is ensured and backed up by Schnellers well-equipped and experienced Design and Color Matching staffs. Heat-activated or pressure-sensitive adhesive provides the versatility needed to satisfy all application requirements. Superior texture retention during heat application and forming ensures that covered panels maintain their low-gloss, non-plastic look. Stainsolvent-resistant top facing makes AerFilm LHR more cleanable and maintainable.Compliant with FAA Heat Release and Smoke Density requirements as per 14CFR 25.853 (a) and (d) and major aircraft manufacturers toxicity specifications.

AerTrim LW is a medium-weight, integrally colored glass fiber-reinforced decorative laminate ideally suited for areas where weight is still important but increased abuse is expected. Applied to flat or single-contoured parts, AerTrim LW can easily be wrapped around a radius of 18 inch (3.2mm). Product Features Thermoplastic resin system is more flexible than other fiberglass-supported products, for easier cutting, handling, edge wrapping.Exceeds latest 6565200 heat release rate and smoke density requirements. Stainsolvent-resistant top facing for easy cleaning. Unlimited custom color matching. Graphic design assistance through Schneller's Design Center. Available with Schnellers pressure-sensitive adhesive (PSLHR) or with no adhesive. Can also be applied using commercially available contact adhesives. Qualified to Boeing DMS 2389. Typical roll size: 60-80 yards (55-73 meters). Supplied in continuous rolls, maximum width 60 inches (152cm).

AerTrim BD 100 is Schnellers newest decorative laminate developed for aircraft applications to simulate the look of fabric-type materials. Typical areas of use are bulkheads, class dividerspartitions and dado panels. AerTrim BD 100 has been successfully flight-tested and evaluated in a joint effort with several major airlines. Product Features Textile-like emboss textures Simulate fabric appearanceGlass fiber reinforcement Long life superior durability 6565200 Compliant Improved flame and smoke performance vs. fabric Unlimited custom color and design availability is ensured and backed up by Schnellers well-equipped and experienced Design and Color Matching staffs Product Specifications Typical roll size is 50-60 linear yards (46-55 linear meters). Typical weight of a roll is 140-175 pounds per roll (63-80 Kilograms per roll). Supplied in continuous rolls maximum width of 57 inches (1.5 meters) wide.

AerTrim sofTouch is our newest light-weight, reinforced decorative laminate with a unique soft feel. Ideal for hard surfaces where customer interface and premium cabin experience are essential. Target surfaces are flat and slightly curved 2-dimensional. Product FeaturesProvides a exceptional tactile passenger experience Ultimate design freedom in terms of colors and textures while providing the aesthetic consistency required of premium cabin accommodations ReliablyConsistently passes all FST requirements (FAA and OEM) Superior durability (abrasion, scratch resistance) versus other soft furnishings Superior resistance to fading (colorfastness to light) versus other soft furnishings Superior cleanability and stain resistance versus other soft furnishings Lower weight versus leather (approximately 20 -30% weight savings) Product SpecificationsTypical roll size is 60-80 yards (55-73 meters). Supplied in continuous rolls 58 inches (1.47 meters) wide.