Sealeze, A Jason Company

United States

Sealeze Staple Set Brushes are custom manufactured for each specific application need, with different shapes, lengths, and diameters. All tufted brush designs are available in a variety of filament materials that provide the best performance and value for your particular application. Sealeze's sales representatives and engineering staff specialize in working closely with you to design optimized solutions for use in your application, ensuring successful results and satisfaction. Staple set (or tufted) brushes are available in a range of substrates ranging from wood and polypropylene to high temperature Tivar or any of a variety of options. Let our in-house engineering staff help you determine the best combination of filament and substrate for your application. Metal staple set brush is available in mild steel, stainless steels*, brass, and phosphor bronze and are available with wood, nylon and polypropylene substrates. If you need special filament or substrate materials for your staple set application, Sealeze can accommodate your needs. In addition to our standard materials, we have the capability to manufacture brushes, holders and substrates from less common materials, such as monel or brass. Let us know should your needs require brushes andor holders constructed of non-standard materials.

Grommet and Brush Seal SolutionsDirect from the Manufacturerin floor standard cable seal bigFrom surface mount grommets to under-floor-through-wall cable seals, CoolBalance with XtraSeal technology provides the most efficient brush seals to control air flow for maximizing the efficiency of cooling systems in computer rooms, data centers or other facilities.computer-facilities

Cup seals and cup arcs are available with and without brush holders, or can be installed with mounting tabs. Click here for available mounting tabs. Channel sizes include A, B, C, D, F, G, and K and are available in galvanized and stainless steels. Standard minimum cup outside diameter (OD) and standard minimum arc outside radius (OR) depends on channel size and channel material as shown below. (For cup and arc forms with K channel, contact your Sealeze Sales Representative for maximum and minimum radii). A wide range of synthetic, natural and metal filaments are available.

Inverted arcs (filaments pointed inward) and external arcs (filaments pointed out) are available with and without brush holders. Channel sizes include A, B, C, D, F, G and K and are available in galvanized and stainless steels. Minimum arc outside radius (OR) or inside radius (IR) depends on channel size and channel material as shown below. A wide range of synthetic, natural and metal filaments are available. Ez-Flex Strip Brush is available as an alternative to metal back brush. It's great for use around curves and in-field installation. Click here for more information.If your application requires an arc form with diameter and radius less than those shown, contact a Sealeze Sales Representative for more information. To e-mail us your application information,

Sealeze metal filament brushes are ideal for applications requiring abrasion, electrical conductivity, chemical shielding, electro-magnetic shielding, elevated temperatures or applications where synthetic or natural fiber brushes are not appropriate. Sealeze Metal Filament brushes can be used to dissipate static charges in extreme high-temperature applications.For Food and Pharmaceutical applications, stainless steel filament with stainless steel channel are widely used in these and other FDA-regulated industries. Whether your application is best addressed with straight strip or staple set (tufted) brush, metal filament is available in mild steel, stainless steels*, brass, and phosphor bronze. Filaments are available in diameters ranging from 0.003 to 0.013. Metal Backed Strip Brush Strip brushes are available with galvanized steel or stainless steel channels, as follows: Sections A and B are available in galvanized steel and stainless steel T-304 channel material with the following filaments mild steel, stainless steel T-304, brass and phosphor bronze. Sections C, D, F and G are available in galvanized steel and stainless steels T-304 and T-316L channel material with the following filaments mild steel, stainless steels T-304 and T-316L, brass and phosphor bronze. *T-304 is stock, T-31

Inverted and external spirals are available both right-hand and left-hand wound, in a wide variety of synthetic (including conductive), metal, and natural filaments and in a full range of pitches. Channel sizes include A, B, C, D, F, G and K and are available in galvanized and stainless steels. Minimum outside diameter (OD) and inside diameter (ID) depend on channel size and channel material as shown below. Ez-Flex Strip Brush is available as an alternative to metal back brush. It's great for use around curves and in-field installation. Click here for more information.Mandrels for external spiral brushes can be made to your specifications, including: solid or tubular construction, keyway or threaded mounting, welded or clip-mounted brush. If your application requires a spiral with diameter less than those shown, contact a Sealeze Sales Representative for more information. To e-mail us your application information, click here.Or, call 1-800-787-7325 or 1-804-743-0982

Straight strip brush with nylon filament is available immediately from our large stock, in 8 ft. or 10 ft. lengths with nylon 6 filament, galvanized steel channels and a variety of filament trim lengths and diameters. Custom trim lengths, filament diameters and filament materials (metal and natural), as well as other channel materials, are available with quick turnaround. Download the Sealeze Straight Strip Stock Nylon Brush and Holder Reference Guide in PDF format. If our sto

Lever Seals of almost any length Long lever seals can be configured using Sealeze stock nylon brushes mounted brush holders. Brushes with holders are mounted in parallel with the ends of the filaments just touching. With brush holders, end clips are not necessary. Holders can be provided with mounting holes to meet your specifications. Click here for mounting hole options. If your application requires lever seals with special materials, shapes or sizes, contact a Sealeze Sales Representative for more information.

Sealeze manufactures brushes using tampico, pig hair and horsehair filament for applications where synthetic filaments are not suited. Tampico is a plant fiber obtained from the Agave plant that grows in Mexico.Of a medium-soft texture, resistant to heat and chemicals, and highly water absorbent, tampico is most often used for light scrubbing, washing and light-abrasive applications. Horsehair is relatively soft to moderately stiff, depending on bristle length and grade. Horsehair is used dry for polishing or scratch-free cleaning on delicate surfaces. Pig hair, often used for cleaning or spreading viscous fluids, is a stiff, resilient, non-conductive fiber. Sealeze manufactures a wide variety of brush sizes with natural filaments. A Sealeze Sales Representative can help you determine the right brush for your application. Contact a Sealeze Sales Representative for more information. Static Dissipative Brush Filament Sealeze can produce brushes with soft plymer filaments that conduct and dissipate static electric charge. For more information on these types of products, see our Static Electricity Dissipation page. Elevated Temperature Brush Filament hightemp Brushes are often required to perform in applications where temperatures can reach several hundred degrees. Temperature range and brush characteristics such as stiffness, abrasiveness and filament length must be considered in selecting the correct filament for the application. Sealeze offers several different brush materials, both synthetic and metal (click here for metal filament brushes), for high temperature environments. Our synthetic brushes for elevated temperature applications have excellent abrasive resistance, flex life, bend recovery and solvent resistance and are designed for sustained working temperatures up to 300 degrees F. These brushes are immediately available from stock, are assembled with straight or angled clear anodized aluminum holders and come in 8 ft. or 10 ft. lengths. If our stock brushes dont meet your needs, we can manufacture these brushes with custom trims, materials and densities. Contact a Sealeze Sales Representative for more information. To e-mail us your application information, click here. Or, call 1-800-787-7325 or 1-804-743-0982 METAL BACKED STRIP BRUSHXTRASEAL STRIP BRUSHEZ-FLEX STRIP BRUSHSTAPLE SET BRUSHFORMED STRIP BRUSHCOOLBALANCE FLOOR & WALL GROMMETSSTRIP BRUSH HOLDERS & ACCESSORIES logos DownloadsAbout BrushSelecting The Right BrushCreditCareersPatentsLegal and Privacy Statementlogo whiteJason Inc.

Ez-Flex flexible strip brush brings another dimension to your design options. The flexibility of our Ez-Flex strip brush allows it to conform to contours and shapes that typical metal-backed brush cannot address. Constructed entirely without metal parts, these brushes use high-quality nylon or polypropylene filament. Ez-Flex strip brush is effective in temperatures as low as -70 F. Ez-Flex strip brush comes in virtually any length, with nylon or polypropylene filament, nylon or polypropylene channels and a variety of filament trim lengths and diameters. It can be used with or without our traditional aluminum holders. To download the Sealeze Ez-Flex strip brush Worksheet in PDF format, click here for English and here for metric. Sealeze Ez-Flex provides engineers and designers with a flexible way to eliminate problems. Need a continuous length of brush to fit

brushes are ideal for heavy-duty sealing applications where an impervious, yet flexible, shield is required. Air Flow with Sealeze XtraSeal Brush Learn how Sealeze XtraSeal brush provides the best seal for reducing air flow.Sandwiched between layers of filament, a solid sheet of thin, flexible material (membrane) provides a barrier to debris and sprays. This is ideal for tough applications where debris or jets of fluid need to be contained. XtraSeal brushes can be provided with membrane lengths to your specification. Typically, the membrane is 0.250 inches shorter than the brush filaments to maintain the sweep effect of the brush. XtraSeal brushes are available in B, C, D, F and G sizes, with galvanized steel