Our Products
Level Transmitters
1 Products availableOur offered Product range includes NYRD-PB Radar level sensor, NYRD-SL Radar level Sensor and NYRD702 Guided Wave Radar Level Sensor.
High Frequency Radar Level Meter
Design features:
Small antenna size, easy to install; non-contact radar, no wear, no pollution
Hardly affected by corrosion or foam; hardly affected by changes in water vapor, temperature and pressure in the atmosphere.
Severe dust environment has little influence on the work of high frequency level gauge.
Shorter wavelength, better reflection on inclined solid surfaces
The beam angle is small and the energy is concentrated, which enhances the echo ability and helps to avoid the interference.
The measurement blind area is smaller, and good results can be obtained for small tank measurement.
High signal-to-noise ratio, even in the case of switching, can achieve better performance
High frequency is the best choice for measuring solid and low dielectric constant medium
2. Technical parameters
Application:Easy to crystallize, dew, corrosive liquid, powder
Antenna material: 316L/PTFE/Flat
Measuring range: 40 meters
Frequency range: 26GHz
Accuracy: 3mm
Medium temperature: -40 to +260 C
Process pressure: -0.12.0Mpa
Power supply: 24vDC (two-wire, four-wire optional)
Signal output: 4.20mA/HART (two lines/four lines)/ RS485/Mod bus
Process connection:Flange
Protection level: IP67
Explosion-proof grade: Exia IIC T6 Ga
Additional Information:
Payment Terms : T/T
Delivery Time : 10
We are the main supplier of this product.
Additional Information:
Payment Terms : T/T
Delivery Time : 10
Design features
Guided wave radar level gauge adopts advanced microwave processing technology and unique Echo Discovery echo processing technology. Contact measurement has high accuracy and more accurate measurement. At the same time, guided wave radar is anti-adhesion, not affected by external environment such as medium temperature and adhesion.
The 70X series guided wave radar level gauge is suitable for various complex working conditions and application occasions due to various process connection modes and detection components. For example, high temperature, high pressure and low dielectric constant medium, etc.
Using pulse mode, the product can be installed in all kinds of metal and non-metal containers with very low emission power, which is harmless to human body and environment.
Application:No stirring liquid or powder
Antenna material:304/PTFE/Rod type
Measuring range: 6 meters
Frequency range: 1.8GHz
Accuracy: 1mm
Medium temperature: : -40 to +130 C;-40 to +250 C
Process pressure: -0.14.0Mpa
Power supply: 24vDC (two-wire, four-wire optional)
Signal output: 4.20mA/HART (two lines/four lines)/ RS485/Mod bus
Process connection:Flange/Thread
Protection level: IP67
Explosion-proof grade: Exia IIC T6
Additional Information:
Payment Terms : T/T
Delivery Time : 10