Post Buy Requirement
SS
United States
Add Review

Laboratory Equipments

ITW Red Head Stud Anchors

ITW Red Head Stud Anchors are specified for anchorage into concrete. Stud Anchors feature a bolt body and pre-assembled expander plug. Anchors should be installed with carbide tipped hammer drill bits made in accordance to ANSI B212.15-1994. Anchors are tested to ASTM E488 criteria. Anchors are listed by the following agencies as required: UL and FM
View Complete Details

ITW Red Head Redi-Drive Pipe-Drive Anchors

  • Model No. PD4-112
  • Size 1/4 x 2-1/8 in
  • Anchor Diameter 1/4 in - 20
ITW Red Head Redi-Drive is a high performance small diameter one-piece hammer-drive anchor. The anchor holds based on a friction principle-the shank diameter is larger than the drill hole size. Anchors should be installed with carbide tipped hammer drill bits made in accordance to ANSI B212.15-1994. The Redi-Drive is available in four types: mushroom head, pipe-hanging (14" & 38"), Tie- Wire, and double head forming versions. Anchor performance in solid concrete at one inch embedment shall exceed 400 lbs. allowable tension load and 750 lbs. allowable shear load.
View Complete Details

HWH Tapcon Masonry Anchor

  • Model No. SHW4-114
  • Size 1/4 x 1-1/4 in
  • Anchor Diameter 1/4 in
  • Weight/Box 1.4 lbs
Red Head Tapcon Stainless Steel Hex Head Anchor is the "original masonry" anchor that cuts its own threads into concrete, brick, or block. Maximum performance is achieved because the Tapcon Anchor, the Condrive Installation Tool, and the carbide-tipped Tapcon Drill Bits are designed to work as a system. It is essential to use the Condrive tool and the correct drill bit to assure consistent anchor performance. A Phillips Flat Head style is available when flush seating is necessary in countersink applications. The Climaseal Coating is standard on all Tapcon anchors to provide extended corrosion resistance. Advanced thread form cuts into masonry materials for greater stability and pullout values Lengths of Tapcon Anchors range from 1-14 inch to 4 inch in 316 inch and up to 6 inch 14 inch diameters. Nail-Type Point guides the anchor into the pre-drilled hole, so no hole spotting or inserts are required. These anchors install fast and easily (three anchors per minute), and are excellent for wood to concrete applications. Specs: Fixture Thickness - 1-14 to 1-34 inches; Bit Length - 4-12-Inch inches.
View Complete Details

ITW Red Head Redi-Drive Anchors

ITW Red Head Redi-Drive is a high performance small diameter one-piece hammer-drive anchor. The anchor holds based on a friction principle-the shank diameter is larger than the drill hole size. Anchors should be installed with carbide tipped hammer drill bits made in accordance to ANSI B212.15-1994. The Redi-Drive is available in four types: mushroom head, pipe-hanging (14" & 38"), Tie- Wire, and double head forming versions. Anchor performance in solid concrete at one inch embedment shall exceed 400 lbs. allowable tension load and 750 lbs. allowable shear load.
View Complete Details

ITW Red Head Multi-Set Drop-In Anchors

  • Model No. RM-14
  • Bolt Size Threads 1/4 in
  • Drill Bit Diameter 3/8 in 9.5 mm
  • Thread Depth 3/8 in 9.5 mm
  • Weight/Box 2.6 lbs
ITW Red Head RM Multi-Set Drop-In Anchor. Drop-In, shell type anchors feature an internally threaded, all-steel shell with expansion cone insert and flush embedment lip. Anchors are manufactured from zinc-plated carbon steel, 18-8 stainless steel and 316 stainless steel. Anchors should be installed with carbide tipped hammer drill bits made in accordance to ANSI B212.15-1994 specifications. Anchors should be tested to ASTM E488 criteria and listed by ICC (formerly ICBO). Anchors should also be listed by the following agencies as required by the local building code: UL, FM, City of Los Angeles, California State Fire Marshal and Caltrans.
View Complete Details

ITW RedHead Trubolt Carbon Wedge Anchors

  • Model No. WS-1416
  • Size 1/4 x 1-3/4 in
  • Overall Length 1-3/4 in 44.5 mm
  • Anchor Diameter 1/4 in - 20
  • Weight/Box 3.1 lbs
Trubolt Wedge anchors feature a stainless steel expansion clip, threaded stud body, nut and washer. Anchor bodies are made of plated carbon steel, hot-dipped galvanized carbon steel, type 304 stainless steel or type 316 stainless steel as identified in the drawings or other notations. The exposed end of the anchor is stamped to identify anchor length. Stampings should be preserved during installation for any subsequent embedment verification. Use carbide tipped hammer drill bits made in accordance with ANSI B212.15-1994 to install anchors. Anchors are tested to ACI 355.2 and ICC-ES AC193. Anchors are listed by the following agencies as required by the local building code: ICC-ES, UL, FM, City of Los Angeles, California State Fire Marshal and Caltrans.
View Complete Details

ITW RedHead Trubolt Stainless Steel Wedge Anchors

  • Size 1/4 x 1-3/4 in
  • Model No. WW-1416
  • Anchor Diameter 1/4 in - 20
  • Overall Length 1-3/4 in 44.5 mm
Trubolt Wedge anchors feature a stainless steel expansion clip, threaded stud body, nut and washer. Anchor bodies are made of plated carbon steel, hot-dipped galvanized carbon steel, type 304 stainless steel or type 316 stainless steel as identified in the drawings or other notations. The exposed end of the anchor is stamped to identify anchor length. Stampings should be preserved during installation for any subsequent embedment verification. Use carbide tipped hammer drill bits made in accordance with ANSI B212.15-1994 to install anchors. Anchors are tested to ACI 355.2 and ICC-ES AC193. Anchors are listed by the following agencies as required by the local building code: ICC-ES, UL, FM, City of Los Angeles, California State Fire Marshal and Caltrans.
View Complete Details

E-Z Drywall Anchors

  • Model No. EZ100
  • Price Unit of Measure C = 100 EA = 1 C
  • Box Qty. 100
  • Weight/Box 1.6 lbs
Redhead EZ100 Zinc E-Z Drywall Anchor Box of 100. Use the popular Nylon EZ-Anchor in drywall from 38" to 58". Easy to install with your phillips head screwdriver. Use with a #8 sheet metal screw. Installs quickly with a phillips screwdriver. Perfect for many light duty applications from shelving and electrical fixtures, wall fixtures and security cameras.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Stanley Supply Online)
  • Long Island City, NY 11101 map, United States
  • Share us via