Bags #4966848

The Aircraft Lifting Bag is used to lift crippled aircraft from runways or terrain where itis impractical or impossible to use standard aircraft jacks. SUBSALVE USA is currentlymanufacturing these airlifting pneumatic bags for the U.S. Air Force, as well as manyother foreign air forces throughout the world (NSN # 173-00-263-2962). Constructed of the same urethane-coated nylon as our underwater lift bags, these liftbags are highly resistant to extreme atmospheric temperature, abrasion and petrochemicals.Equipped with all necessary hardware ready for immediate useEach SUBSALVE USA lift bag is tested prior to shipping.Accessories:in diameter 50ft inflation hoseGround cover

When you need to float an object close to the surface, use SUBSALVEs pillow shaped Enclosed Flotation Bags in any positionupright or flat, outside or inside of structuresfor vessel salvage, auto recovery, pipeline and cable installation and emergency flotationfor ships, aircraft, submersibles and ROVs.FabricUrethane-coated nylonhigh-strength and heavy-dutySuperior abrasion resistanceResistant to most petro-chemicalsUV-resistantLow maintenance requirements and easy to cleanRF welded seams Lifting HarnessHeavy nylon lift harness built into the body of the lift bagSafe working ratio of 6:1 Safe and easy to useEquipped with all necessary hardwareready for immediate use34 NPT inflationdeflation port equipped with ball valveStainless steel quick disconnect for inflationPressure relief valves: set to release at 2.5 psi above ambient pressureEnough pressure relief vales are

Versatile and easy-to-use, these enclosed-bottom, parachute-shaped lift bags witha single attachment point are essential in construction, heavy and light salvage andmany offshore tasks.Inverted water droplet design facilitates maximum lift capacity with least possibleweight, with stress distributed evenly over the fabric surface.Able to be pre-inflated when necessaryWill not dump air if the bag breaks the surface of the waterPressure relief valves at the bottom of the bag avoid over pressurization of the lift bagEquipped with all the necessary hardware and ready for immediate use. FabricUrethane-coated nylonhigh-strength and heavy-dutySuperior abrasion resistanceResistant to most petro-chemicalsUV-resistantLow maintenance requirements and easy to cleanRF welded seams Easy To UseBelow 2 tonsMultiple nylon lift straps sewn directly to bottom of lift bag, which bears loadand provides safe working ratio of 6:1.Fitted with a 34 NPT inflation port with quick disconnect or cam lock fitting anda 34 stainless steel ball valve for rapid deflation.2 tons and overDesigned with a replaceable heavy-duty nylon webbing lift harness fabricated intothe skin of the bag, which bears the load and provides a safe working ratio of 6:1.Fitted with a 34 NPT inflation port with quick disconnect or cam lock fitting anda 34 stainless steel ball valve for rapid deflation.

Specially designed lift bags used to remove and install boat propellers.Available in three standard sizes (100lb, 200lb, 300lb), custom sizes available.Each lift bag has 4 lift points and one dump valve with lanyard for manualoperation.Each SUBSALVE USA lift bag is tested prior to shipping.Custom sizes available.All Subsalve USA products are compliant with IMCA D-016-AIRBAGS, ABS, U.S. Department of Defense Standards.

Tech divers, wreck divers and public safety divers use this multi-purpose bag as:A lift bag to recover objects.An up-line float.A decompression-line float.A dry bag.An inflatable dive flagfloat to warn off boaters.Quad bags are ready to goManufactured of high-strength, lightweight, vinyl coated nylon fabric.Can be rolled up small enough to carry on every dive.Screened on both sides with a bright red divers down flag for high visibilityEquipped with an oral inflation and an optional lanyard operated dump valve.Equipped withVelcro tie strapBottom waterproof closureStainless steel snapOral inflationEquipped with all necessary hardware ready for immediate use.U.S. Patent No. D-362, 817Each SUBSALVE USA lift bag is tested prior to shipping.Custom sizes available.All Subsalve USA products are compliant with IMCA D-016-AIRBAGS, ABS, U.S. Department of Defense Standards.

The Subsalve USA lifeboat davit testing system allows for lifeboat davits and otherstructures to be load tested in areas with insufficient access for conventional solidweights. The handling weight of water filled test bags compared to solid weights issubstantially reduced increasing ease of use.To use the system simply place the empty bag in the desired location, fill withwater, execute the load test and discharge the water from the bag. ComponentsDesired number of 375KG capacity test bags (6 handling straps per bag)34 x 50ft Inflation a & discharge hoses with quick couplers fittings6 station manifold with 34 quick couplersAir driven double diaphragm pump rated to 15 GPM.25ft Inflation & discharge hoses Each SUBSALVE USA lift bag is tested prior to shipping.Custom sizes available.All Subsalve USA products are compliant with IMCA D-016-AIRBAGS, ABS, U.S. Department of Defense Standards.