Decorative Laminates in USA

YOU ARE IN : USA / Construction / Wall And Floor Decorative / Decorative Laminates

View 42 Products below

  • Aertrim Bd 100 Aircraft Decorative Laminate

    • Series : AerTrim BD 100

    AerTrim® BD 100 is Schneller’s newest decorative laminate developed for aircraft applications to simulate the look of fabric-type materials. Typical areas of use are bulkheads, class dividerspartitions and dado panels. AerTrim® BD 100 has been successfully flight-tested and evaluated in a joint effort with several major airlines. Product Features Textile-like emboss textures Simulate fabric appearance Glass fiber More...

    Schneller, Inc.

    | More...

  • Diclad Series Laminates

    • Low Electrical Loss : 0.0009 to 0.0018 at X-band)
    • Low Dielectric Constant : Typical Range: 2.17 to 2.60

    DiClad® laminates are Fiberglass Reinforced PTFE-based composites for use in High Frequency Applications as printed circuit board substrates. Controlled Fiberglass and PTFE content and ratio enable DiClad laminates to offer a range of low dielectric constant values. The lowest dielectric constant and loss tangent are achieved with higher relative PTFE content, while a higher ratio of fiberglass reinforcement provide More...

  • Graphite Laminate With 316 Ss Wire Insert

    • Standard Thickness: : 1/32”, 1/16”, 1/8”
    • Sheet Size: : 39.4” x 39.4”(Meter Size), 60” x 60”

    Graphite Sheet Laminate with reinforcement 316 stainless steel wire mesh insert, adhesive bond. Made with high purity Minseal 2010-B Industrial Grade Flexible Graphite.

    Mineral Seal Corp.

    | More...

  • Lam Flexible Laminates

    • DE_CNSTNT : 2.9
    • DE_BRKDWN : 8050 Volts
    • THICKNESS : 0.006 (0.15mm)

    The Fibertek ''Res-I-Lam'' family of DMD Flexible Laminates is both new and revolutionary in today's marketplace. All other producers of DMD Laminates use a solvent based adhesive system which falls woefully short of the quality features of the Fibertek DMD products. The Fibertek superiority is a direct result of our proprietary solvent-free adhesive system, developed and employed exclusively by Fibertek. More...

    Fibertek, Inc.

    | More...

  • Cfl4547ac Confor Foam Laminate

    • Thickness : 2"
    • Series : CFL4547AC

    Confor Foam Laminate CFL4547AC MediumFirm 2" thickness Confor Foam CF45AC and CF47AC are laminated together to offer a seating experience that offers greater comfort and support than a single layer and slight variation from the CF42ACCF45AC and CF42AC47AC laminate. The laminated sheets are available in 16" x 18, " 18" x 20" and 18" x 24." Weight of material is 1.06 lbssquare foot. Please be aware that 1 and 2 inch th More...

    Scs Interiors

    | More...

  • High Performance Flexible Laminates

    • Family : DMD
    • Construction : Construction

    3M™ DMD180 High-Performance Flexible Laminate is a specially formulated non-woven material laminated on both sides of a polyester film. It has strong dielectric strength and good thermal performance in high-temperature motor applications. Available from 6 to 24-mil (.15 to .61mm) thickness, DMD180 laminates are excellent solutions for major insulation applications rated through Class 180(H). Applications MotorGener More...

    Bristol Tape Corp.

    | More...

  • Furniture Laminate

    • Color : Gray
    • Item Number: : 400297
    • Shipping Weight: : 65.00 lbs

    The ability to combine polyethylene foam with film creates a virtually tear proof film that addresses the needs of various applications. Easy to use, lightweight and recyclable, this material resists scratching marring and abrasion and is a More...

  • Ad Series Laminates

    AD series PTFEwoven glass based laminates are designed for cost sensitive commercial applications and deliver consistent, high performance required of high frequency PCB materials. This product series is offered with a dielectric constant range from 2.5 to 10.2, with loss tangent values ranging from 0.0014 to 0.003 @ 10GHz. This offers designers a broad range of products to meet demanding requirements for a variety o

    Rogers Corporation

    | More...

  • Post your Buy Requirement

  • Industrial Laminates

    Lamitex® thermoset high-pressure laminate grades in Sheet, Rod and Tube in stock. All NEMA grades available, Phenolic, Epoxy, Melamine, Silicone and specialty grades. Common Grades include, X, XX, C, CE, LE, G-3, G-5, G-7, G-9, G10, FR-4 and G-11. Laminate Insulation is readily machined to customer specifications. Custom specialty grades include Kevlar® filled Phenolic and FiberglassPolyimide high-temperature lamin

  • Aluminum Bubble Laminate

    Designed to provide a static-safe environment for ESD-sensitive electronic components Eliminates damage from physical shock during handling and throughout the distribution cycle Maintains cushioning protection over time and provides extra cost savings with each reuse. Does not degrade electrically with multiple uses Contains Bubble Wrap® Brand cushioning inside

  • Ptfe Laminates

    Developed with demanding environments in mind, CHEMFAB® PTFE Laminates remove uncertainty in processes by providing the longest-lasting, most consistent performance innovations for a broad range of unique applications. CHEMFAB® PTFE laminates provide excellent barrier and release properties, combining the most advanced, void-free, multilayer fluoropolymer films with fabric reinforcement. CHEMFAB® PTFE laminates ar

  • Laminates

    AD series PTFEwoven glass based laminates are designed for cost sensitive commercial applications and deliver consistent, high performance required of high frequency PCB materials. This product series is offered with a dielectric constant range from 2.5 to 10.2, with loss tangent values ranging from 0.0014 to 0.003 @ 10GHz. This offers designers a broad range of products to meet demanding requirements for a variety o

    Rogers Corporation

    Woodstock | More...

  • Laminates

    Laminate material, a thin piece of PVC film with a backing, is used in a variety of industries including food service, furniture, and automotive. Recognized for having either a fuzzy non-woven backing or simply being laminated to another piece of vinyl film, laminates are key in products that are designed to be durable, easy to clean, and protective.

    Adams Plastics

    | More...

  • Post your Buy Requirement

  • Plastic Laminate

    Stevens Advantage offers a huge variety of products and tools to design and develop projects and capture exact specification details. Stevens Advantage has developed highly durable, eco-friendly laminate products that reflect the natural texture, tone and ambience of solid wood products. Imagine the possibilities of creating high-design signature products at a fraction of the cost of real wood. Stevens Advantage make

    New England Lab Supplies

    Warwick | More...

  • High Pressure Laminates

    Deals in hot rolled, Coated Steel Coils, Aluminum Plates, Brass Plates, Plastic Material, mold making epoxy, corrosion resistant materials, stainless coil, Galvanized, Engineering plastics, Adhesive products, Copper Plates, industrial material, Stainless Sheet, High Pressure Laminates, cold rolled, Steel Sheets, Fabrications, Bronze Plates

  • Flexible Laminates

    Deals in zip pouches, Flexible Laminates, Pp Woven Bags, PP Bags, Non Woven Fabric, Perforated Bags, Pp Woven Fabric, HDPE Sacks, PET film, Polymers, Holographic Film, Plastic Chemicals, BOPP Film, woven sack, metalized films, engineering resin, HDPE Fabric, Laminated Fabric, plastic resins, HDPE Bags

  • Laminate

    Deals in Lumber, counter tops, Hardware Products, Roofing Material, Laminate, Carpet, Plumbing Material, Building Materials, cabinets, siding material, Tile

  • Laminate

    Deals in Office Supplies, Steel Bearing, Mining Machinery, Construction Material, carbon steel, screen protectors, school supplies, Laminate, hole punches, watercraft parts, Steel Pipes

    Punjtan Energy Inc

    houston | More...