Edm Machine in USA

• Maximum Part Size : 21"x18"x16"
• Tolerance : 0.0003"

Our CNC 6 axis wire EDM cutting machines can handle production of components, with nearly any intricate geometry, used in aerospace, military, and automotive applications. We manufacture wire EDM machined work-holding fixtures as well as dies from electrically conductive materials such as tool steel, alloy st more...

• Tank Size : 17.7" x 13.77" x 7.87"
• Table Size : 13.8" x 9.8"

The EDAC1 sinker EDM machine is built to deliver the highest level of accuracy and surface finish capability with its refined power generator control and exacting construction. The mechanical alignment tolerances of each axis is 2 microns (0.00008”) or smaller over the full stroke, and the machine is capabl more...

• Model No. : FH30
• Spindle Speed : 3000 RPM

Offsite Diagnostics via analog or digital inputs 16 Axes capability Rotary Table Accuracy 3 to 5 arc seconds Squareness .0005 Repeatability .0002 Electrode capability 24" Electrode diameter .012" - .25" Rapid Speed 400 ipm X, Y, Z 200 ipm W Drive Resolution, Absolute encoders more...

• Part Size : 1/2
• Component Preservation : Our traveling Wire EDM features anti-electrolysis (patented) providing protection against corrosion, oxidation and discoloration on iron, steel, aluminum, and titanium alloys.
• Hole Depth : Our equipment is capable of fabricating holes up to 9
• Quality Control : Our inspection department provides experienced personnel and inspection equipment, necessary to satisfy our customers' ever tightening quality requirements. We supply documentation upon demand for all quality functions including: First Article, in Pr
• Hole Diameters : Our precision hole drilling department is capable of drilling holes from 0.010

The jewel of our technology and equipment is in our Electrical Discharge Machining Department. Klesk Metal Stamping Co. has had wire EDM capabilities since 1977. We have wire, conventional, and small hole drilling EDM. We use our EDM equipment to build our production tooling, build fixtures, do prototypes and more...

Electrical discharge machining is a machining method primarily used for hard metals or those that would be very difficult to machine with traditional techniques. EDM typically works with materials that are electrically conductive. EDM can cut intricate contours or cavities in pre-hardened steel without the ne more...

Doing ID holes can be a bear. Getting as good an ID hole as you do an OD hole, perfectly round, can also be a bear. If the ID hole is blind, it is even worse. Northeast EDM has solved all of this with the creation of its ID hole popper that can work in material from 6” to 36” in diameter. more...

Climate-controlled 20, 000 sq, ft. EDM manufacturing facility houses engineering, Electrical Discharge Machining (EDM) machining service, grinding sector, inspection departments and full service high speed machine shop. more...

We have an operational base of 14 various state of the art EDM machines. Our latest Mitsubishi technology machine produces the finest finish at the least amount of time and at the least expensive cost. We evaluate each of our manufacturing requirements to determine the appropriate method of manufacturing. In more...

The wire, which is constantly fed from a spool, is held between upper and lower guides. The guides move in the X-Y plane, and sometimes the upper guide can also move independently giving rise to transitioning shapes (circle on the bottom square at the top). This gives the Wire EDM the ability to be programmed more...

This FANUC 11D-i12 Wire EDM (Electric discharge machining) machine burns with virtually no re-cast. – 200 Amp 4 axis Wire EDM – Up to 12’’ thick material capability. – Wire break and automatic feed for unattended operation. – Tolerances as low as .0001 of an inch more...