Suzhou Schrada

Suzhou, United States

stainless steel negative pressure fan completely discharges the indoor hot air and odor through the negative pressure exhausting, the fresh air naturally flows into the room for ventilation, and the air exchange rate is up to 99%, it has large air volume, low energy consumption, low speed, low noise and defense, advantages such as dust and rain can be used alone or in combination with other equipment, and are favored by many customers.

core configuration

1. Outer frame: 304 stainless steel;

2. Wind blade: 304 stainless steel;

3. Transmission mode: belt type;

4. Motor: all copper motor.

application installation environment

1. Industry: garment factory, plastic factory, electronics factory, electroplating factory, chemical plant, machinery factory, printing and dyeing factory, coal factory, machinery factory, etc.;

2. Business: shopping malls, supermarkets, hotels, entertainment venues, hotels, internet cafes, etc.;

3. Animal husbandry: pig farm, chicken farm, rabbit farm ventilation;

4. Agriculture: garden flowers, greenhouses, aquaculture bases, etc.;

5. Places that require cooling and humidity. Such as cotton mills, wool mills, linen mills, textile mills, chemical mills, warp knitting mills, texturing mills, knitting mills, silk mills, hosiery factories and other types of textile mills;

6. Suitable for warehousing and logistics, e-commerce

introduction of permanent magnet energy saving fan
permanent magnet largescale energysaving fan is powered by a permanent magnet brushless motor, the fan blade is made of titanium-magnesium-aluminum alloy, and the ventilation cooling device driven by the single-phase 220v power source has a large area without dead angle vertical air supply, and the wind is soft and comfortable, and at the same time accelerate indoor and outdoor air convection, take away the hot air generated by the equipment, and have the functions of ventilation cooling, accelerated air circulation, dust removal and dehumidification.

core configuration
motor: permanent magnet brushless synchronous motor, no gearbox, power:1.2kw/ac 220v
control: intelligent frequency conversion control system, stepless speed control knob;with emergency start and stop, overload protection, voltage shock protection, phase loss protection and other protection functions
fan blade: titanium magnesium alloy material, high density, high hardness, good toughness, small and light
main frame: a380 aluminum alloy frame, with high hardness, light weight, high-end, beautiful, corrosion-resistant
hardware bolts: all stainless steel, can be used under humid conditions, acid and alkali conditions
others: exclusive shock absorption design, pu film is used for the connecting part of the blade hub and the fan connecting beam, to prevent resonance, reduce fan noise and extend fan life

Introduction to mobile air coolerThe mobile air cooler is a multi-functional equipment that integrates cooling, ventilation, dust removal and deodorization. The equipment can bring cooling and ventilation effects to many public places and household occasions such as workshops, logistics warehouses, stadiums, venues, shopping malls, etc.

Advantages of mobileair cooler1. Energy saving: only consume 1 degree of electricity per hour, and the cost is low;2.Environmental protection: no freon gas, integrating deodorization, ventilation, cooling and humidity;3. Cooling: fast efficiency, cooling effect of 3 C -6C;4. Coverage area: large air volume and long distance, the equipment coverage area can reach 60-150;5. Installation: Mobile fan can be used directly on the ground for easy maintenance.

Suzhou Schrada Environmental Technology Co., Ltd. is specialized in the factory building ventilation function, warehouse dehumidification project, waste gas treatment project, pipeline ventilation project scheme design and project installment factory, providing comprehensive environmental protection ventilation and exhaust gas purification solutions for enterprises.

Core configuration

1. Outer frame: galvanized sheet material;

2. Wind blade: stainless steel material;

3. Transmission mode: belt type

4. Motor: All copper aluminum shell motor.

Application installation environment

1. Industry: garment factory, plastic factory, electronics factory, electroplating factory, chemical plant, machinery factory, printing and dyeing factory, coal factory, machinery factory, etc.;

2. Business: shopping malls, supermarkets, hotels, entertainment venues, hotels, Internet cafes, etc.;

3. Animal husbandry: ventilation, pig farms, rabbit farms, etc.

4. Agriculture: garden flowers, greenhouse, aquaculture base;

5. Places that require cooling and humidity. Such as cotton mills, wool mills, linen mills, textile mills, chemical mills, warp knitting mills, texturing mills, knitting mills, silk mills, hosiery factories and other types of textile mills;

6. Applicable to the field of warehousing and logistics, e-commerce.

the full name of the "hvls" large fan is "high volume, low speed", which is a large fan with a large air volume and a low wind speed.when it works, it rotates slowly through the super-large fan blade to drive a large amount of air to flow continuously downward and spread out along the ground, effectively promoting a wide range of sufficient convection inside and outside the room, and replacing the dirty hot air inside the room through air convection, so as to improve the indoor working environment.

1) easy in installation and maintation.

2) adopting advanced world famous brand components in pneumatic parts , electric parts and operation parts.

3) the speed of wind is 1-4 m/s, provide the best feeling for people.

4) low-consumption and high-efficiency.

5) this energy-saving industrial ceiling fans have been widely used in machinery, agriculture, animal husbandry and food production industries.

Model number AT-1260

Motor 750 w

Voltage 380 V

Fans diameter (mm) 1060

Noise decibel

Suzhou Schrada Environmental Technology Co., Ltd. is specialized in the factory building ventilation function, warehouse dehumidification project, waste gas treatment project, pipeline ventilation project scheme design and project installment factory, providing comprehensive environmental protection ventilation and exhaust gas purification solutions for enterprises.

The company is in charge of permanent magnet fans, industrial fans, UV photolysis equipment, plasma processing equipment, activated carbon adsorption processing equipment, environmentally friendly air coolers, fans, axial fans, vacuum fans, ducts and accessories.

TypeEvaporative Air Cooler

MountingWall/Window/Rooftop Mounting

Warranty1 Year

After-sales Service ProvidedVideo technical support

Applicable IndustriesGarment Shops, Building Material Shops, Machinery Repair Shops, Manufacturing Plant, Food & Beverage Factory, Farms, Restaurant, Home Use, Retail, Food Shop, Printing Shops, Construction works , Energy & Mining, Food & Beverage Shops

ConditionNew

Place of OriginJiangsu, China

Brand NameSchrada

Operating Voltage380V

Product nameEvaporative air cooler used for industry

Power1.1 k W

Noise

Galvanized Steel Spiral Duct/Spiral Pipe/Air Duct

Main feature

1. Smooth appearance, no burr, silver white;

2. Convenient installation and little connection;

3. Small ventilation resistance and low ventilation noise;

4. Good strength and rigidity;

5. The thickness is controllable and can be selected arbitrarily in 5-107 mu m.

6. We can design and customize all kinds of specifications according to customer's requirements.

Function

1. Air supply

2. Exhaust smoke

3.Dust removal

4.Bulk material transport