The National Telephone Supply Company

United States

Nicopress Jumper Sleeves are designed for the loop splicing of both solid and stranded conductor. These partial tension sleeves are made of high conductivity seamless aluminum tubing and meet ANSI C119.4-2011. Each capped sleeve is marked with catalog stock number, conductor size and installation groove. Seamless High Conductivity Aluminum TubingSleeves Develop Class II Partial Tension Requirements in Conformance with EEI-NEMA Standard ANSI C119.4-2011 Inner Bore Filled with Special Oxide Inhibiting CompoundSolid Staked Center BarrierCapped Ends

Split tinned sleeves are used for the non-tension solder splicing of underground power cables. These sleeves are designed for use with concentric, compact, or sector compact cables. Tin coated copper material split design facilitate easy soldering and a good flow of solder into the splice. Smoothly rounded edges assure the uniform distribution of electrostatic stresses.

Full tension sleeves are made from a high conductivity seamless copper or copper alloy with a specially bonded inner bore coating to assure maximum conductivity and holding power. Sleeves often develop 100% of the rated breaking strength of the conductor. Each sleeve is marked with a catalog stock number, conductor size, and installation tool groove. Seamless High Conductivity Copper TubingSleeves Develop 95% or More of the Rated Breaking Strength of the ConductorSpecially Bonded Inner Bore CoatingRolled Center Constriction Conductor Stop

Where wire overlap is available on new fence installation or repair work, Nicopress "FW" Fence Wire Sleeves, installed with Nicopress Compression Tools, provide the fastest and most economical means of splicing fence wire. Sleeves are ideal for lap-splicing and dead-ending woven, barbed, and single strand electrical fence wire.

When repair sections of fence must be cut and returned to its original position, Nicopress Butt Type Sleeves, installed with Nicopress Compression Tools, provide a smooth, continuous wire surface. With no wire overlap, this streamlined splice is ideal in trellis applications where automatic equipment may travel wire.

Nicopress reducing sleeves are designed for jumper splicing applications involving the joining of two different size conductors. Both ends of these sleeves are pressed in the same tool groove. Reducing sleeves are made of high conductivity seamless metal tubing with a specially bonded inner bore coating. Each sleeve is marked with catalog stock number, conductor size, and installation tool groove. Seamless High Conductivity Copper TubingSpecially Bonded Inner Bore CoatingRolled Center Constriction Conductor Stop SpecificationsOther SizesRelated Products

Nicopress split repair sleeves are split their entire length so they can be slipped over damaged or broken wire sections of conductors. Installation of split repair sleeves restores the original conductivity of the conductor and 95% of the breaking strength of the conductor. This is true even when 13 of the conductor wires are broken. These sleeves are made of high conductivity metal and may be used as a seat for hot line clamps. Each sleeve is marked with a catalog number, conductor size, and installation tool groove. High Conductivity Seamless Copper TubingSleeves Develop 95% or More of the Rated Breaking Strength of the ConductorWire Brushing of Conductor and use of Splicing Compound Recommended SpecificationsOther SizesRelated Products

Oval sleeves are efficient terminating products and when properly applied provide a secure connection equal to the rated breaking strength of the wire rope.