Tilt-Or-Lift, Inc.

• SeriesV-25-AF

V-25-AF Service Lifts Our V-25-AF(8, 10, 12) have 22 inch wide runways. This allows a wide variety of vehicles to be raised up to 72" so all service work can be done while standing. The lift has capacities of 25, 000 or 30, 000 pounds. It is portable, has removable runway panels for complete access to the vehicle and a removable floor beam to allow service equipment and toolboxes to be rolled under the vehicle. And of course, it complies with all applicable OSHA and ANSI requirements, has automatic safety backup features, and comes with a one-year warranty.

• SeriesV-13-A

V-13-A Forklift Service Lift The Lift-A-Lift service lift, model V-13-A, is designed to allow complete access to the underside parts of forklifts, industrial trucks and motor vehicles for lubrication, repair, or part replacement. Just drive the vehicle onto the 16 inch wide runways. The self-leveling lift raises the vehicle up to 71 inches so all maintenance can be performed while standing. The Lift-A-Lift service lift complies with applicable ANSI and OSHA requirements. Automatic safety pawls are incorporated in the design to prevent accidents in the event of hydraulic failure. The Lift-A-Lift service lift is portable and has removable runway panels and floor beams for easier access. Standard 16 inch wide runways are factory set at 52 to 69 inches (outside dimension) to accommodate a wide range of vehicles. The lift is available in 13, 000 lbs. GVW capacity. A variety of popular options is available to enhance its utility. All lifts are shipped assembled and factory tested. All lifts also include a full one-year warranty. Click Here for Specs and Drawings of the V-13-A.

Adjustable Lift-A-Lift Fast, Safe, and Easy Maintenance for Forklifts, Industrial Vehicles, and Light Trucks. The Lift-A-Lift® forklift service lift is designed to allow complete access to underside parts of forklifts and other short-wheelbased industrial vehicles for lubrication, repair or parts replacement. Just drive the vehicle onto the adjustable runways. The self-leveling service lift raises the vehicle up to 71 inches, so all maintenance can be performed while standing. The Lift-A-Lift® truck lift is made in the USA and complies with applicable ANSI and OSHA requirements. Automatic safety locks are incorporated into the design to prevent accidents due to hydraulic failure. Compare us to the other guys... We offer more standard features! The Lift-A-Lift® truck lift is portable with removable runway panels and floor beams for easier access. Standard 18 inch wide runways adjust hydraulically from 56" to 76" on the 20, 000#, 30, 000# and 40, 000# service lift. The width adjustment feature accommodates a wide range of industrial vehicles. And of course, it complies with all applicable OSHA and ANSI requirements, has automatic safety backup features, and comes with a one-year warranty.

Fixed Width Lift-A-Lift NEW Fixed Width Lift-A-Lift Provides Safety, Convenience and Economy! Fast, safe and easy maintenance for Forklifts, Industrial Vehicles and Trucks. Tilt-Or-Lift is proud to announce that we now have our most popular model, the four-post Lift-A-Lift, which is now available in an economical fixed-width package. Tilt-Or-Lift has been providing safety to mechanics since 1973. It is designed to provide safe easy access to underbody parts for lubrication, repair or part replacement.

• SeriesV-25-AFSMC Lift-A-Lift

V-25-AFSMC Lift-A-Lift® Platform Lift for Jet Engines Fast, safe and easy maintenance for jet engine repair and service. Tilt-Or-Lift, Inc., the leading designer of specialty lifts since 1973, has changed the way of building, repair and service of jet engines. The Lift-A-Lift Work Platform Model V-25-AFSMC is designed to allow complete access to all parts on jet engines, (standing vertically on a dolly) inside the work platform. Lower the gate plates, then you will have complete access to all sides of the jet engine. Up to 40% savings on labor versus conventional ways to service jet engines. The Lift-A-Lift Work Platform is assembled and tested prior to shipment and comes with a one year warranty. The unit is collapsed to a width of 8'-0" for shipment. The Lift-A-Lift jet engine work platform has a dimension of 12 feet wide by 12 feet long. Vertical travel range of 66 inches raised height. The platform has a capacity of 2, 000# G.V.W. The Lift-A-Lift Work Platform has an adjustable stairway to allow access at any height. Each of the lifts' four lifting posts are hydraulic and have automatic safety pawls in each post to prevent accidents. The Lift-A-Lift Work Platform is assembled and tested prior to shipment and comes with a one year warranty. The unit is collapsed to a width of 8'-0" for shipment. The Lift-A-Lift jet engine work platform has a dimension of 12 feet wide by 12 feet long. Vertical travel range of 66 inches raised height. The platform has a capacity of 2, 000# G.V.W. The Lift-A-Lift Work Platform has an adjustable stairway to allow access at any height. Each of the lifts' four lifting posts are hydraulic and have automatic safety pawls in each post to prevent accidents. The Lift-A-Lift maintenance lift; one of the fine family of service lifts available from Tilt-Or-Lift, Inc., the lift specialists.

V-25-AFSMC Lift-A-Lift® Platform Lift for Jet Engines Fast, safe and easy maintenance for jet engine repair and service. Tilt-Or-Lift, Inc., the leading designer of specialty lifts since 1973, has changed the way of building, repair and service of jet engines. The Lift-A-Lift Work Platform Model V-25-AFSMC is designed to allow complete access to all parts on jet engines, (standing vertically on a dolly) inside the work platform. Lower the gate plates, then you will have complete access to all sides of the jet engine. Up to 40% savings on labor versus conventional ways to service jet engines. The Lift-A-Lift Work Platform is assembled and tested prior to shipment and comes with a one year warranty. The unit is collapsed to a width of 8'-0" for shipment. The Lift-A-Lift jet engine work platform has a dimension of 12 feet wide by 12 feet long. Vertical travel range of 66 inches raised height. The platform has a capacity of 2, 000# G.V.W. The Lift-A-Lift Work Platform has an adjustable stairway to allow access at any height. Each of the lifts' four lifting posts are hydraulic and have automatic safety pawls in each post to prevent accidents. The Lift-A-Lift Work Platform is assembled and tested prior to shipment and comes with a one year warranty. The unit is collapsed to a width of 8'-0" for shipment. The Lift-A-Lift jet engine work platform has a dimension of 12 feet wide by 12 feet long. Vertical travel range of 66 inches raised height. The platform has a capacity of 2, 000# G.V.W. The Lift-A-Lift Work Platform has an adjustable stairway to allow access at any height. Each of the lifts' four lifting posts are hydraulic and have automatic safety pawls in each post to prevent accidents. The Lift-A-Lift maintenance lift; one of the fine family of service lifts available from Tilt-Or-Lift, Inc., the lift specialists.