Post Your Requirement Menu

Welcome User

Other Products / Services

We offer the best product range of Novus Plastic Polish, 3M VHB Tapes, Abs Sheet, acetal sheet and Acrylic Mirror Sheet.

3M VHB Tapes

3M™ VHB™ Tapes provide the convenience and simplicity of a tape fastener and are ideal for use in many interior and exterior bonding applications. In many situations, they can replace rivets, spot welds, liquid adhesives and other permanent fasteners. These 3M™ VHB™ Tapes are made with acrylic foam which is viscoelastic in nature. This gives the foam energy absorbing and stress relaxing properties which provides these tapes with their unique characteristics. The acrylic chemistry provides outstanding durability performance. 3M™ VHB™ Tapes utilize a variety of specific foam, adhesive, color and release liner types to provide each productfamily with specific features. These features can include adhesion to specific or a broad range of materials, conformability, high tensile strength, high shear and peel adhesion, resistance to plasticizer migration, and UL746C recognition. All 3M™ VHB™ Tapes have excellent durability and excellent solvent and moisture resistance. Note: All 3M™ VHB™ Tapes should be thoroughly evaluated by the user under actual use conditions with intended substrates to determine whether a specific 3M™ VHB™ Tape is fit for a particular purpose and suitable for user’s method of application, especially if expected use involves extreme environmental conditions.

View Complete Details

Abs Sheet

ABS (acrylonitrile butadiene styrene) is a common thermoplastic used to make lightweight, rigid products such as automotive parts, piping and laboratory equipment. It is widely used for mechanical purposes, and also has good electrical properties. ABS is strong, rigid and tough and can withstand temperatures between -13 °F and 140 °F without affecting its impact resistance. Dimensional stability under load of ABS is excellent. ABS is resistant to aqueous acids, alkalis, hydrocholoric and phosphoric acids, alcohols and natural oils.

View Complete Details

acetal sheet

Acetal products absorb a minimal amount of moisture, and their physical properties remain constant in a variety of environments. Acetals are easily machined and have excellent dimensional stability for close-tolerance machined parts. Acetal is ideally suited for applications which require strength and stiffness. Acetal shapes are produced from copolymer (Acetron® GP) and homopolymer (Delrin®) resins which provide a high modulus of elasticity coupled with great strength, stiffness and toughness. They are also characterized by a low coefficient of friction and good bearing characteristics.

View Complete Details

Acrylic Mirror Sheet

Colored mirror is an excellent way to make a statement about yourself or your company. These colors can be saw cut to size or laser cut in custom shapes and sizes. All of our colors are continuously manufactured substrate with a non-delamination guarantee. Acrylic mirror is also available in reduced glare, scratch resistant, adhesive back and custom masking on front and back.

View Complete Details

Clear Cast Acrylic Rod

Cast acrylic rod is regarded for its excellent optical clarity, high tensile strength, and outstanding light transmission. It is easily fabricated, shatter resistant and very durable. It replaces extruded or molded acrylics because of better machining properties, greater clarity, better resistance to heat distortion and higher tensile strength. It is unaffected by sunlight or fluorescent light and resists aging and maintains stability under a wide range of conditions.

View Complete Details

Chlorinated Polyvinyl Chloride

See PVC Description. CPVC has higher temperature resistance and exceptional fire resistance properties, providing products with low flame spread and smoke generation characteristics.

View Complete Details

Cutting Board

Total Plastics supplies a variety of cutting board material in various colors and sizes. High density polyethylene is strong, easy to clean and FDA approved in most cases. FDA approved and NSF compliant grades Easily cleaned Lightweight Chemical and corrosion resistant No moisture absorption

View Complete Details

High Density Polyethylene

High Density Polyethylene (HDPE) is a high impact strength material, with a higher operating temperature than LDPE. Abrasion resistance Chemical resistance Excellent machinability Low coefficient of friction Self lubricating Stress-cracking resistance Water Saltwater resistance

View Complete Details

King StarBoard Original Marine Building Sheet

King StarBoard® is the original marine-grade high-density polyethylene and the industry standard. It is the product of a proprietary process called K-Stran®, the most advanced manufacturing process available for producing consistently flat continuous sheets. King StarBoard® is environmentally stabilized to withstand the harshest marine conditions. It will not rot or discolor like teak and other solid woods, and it will not delaminate like wood laminates. King StarBoard® is easy to work with using standard woodworking tools, and design changes are a snap. In addition, the installed cost of King StarBoard® is less than teak, other common marine woods, and fiberglass. Boat buyers appreciate King StarBoard®’s low-maintenance finish. Repair and refinishing due to weathering and decay are eliminated, and cleaning is easy. King StarBoard® has a handsome matte finish on both sides to hide scuffs and scratches that would show on glossy textured sheets or acrylics.

View Complete Details

Novus Plastic Polish

NOVUS® polish can restore and clean your plastic acrylic products. NOVUS® polishes have saved manufacturers and consumers millions of dollars over the 30 years they have been on the market. Plastic storm windows & skylights Boat windows & fiberglass Auto interiors, gauges, chrome & acrylic paint Acrylic hot tubs & spas Acrylic aquariums Telephones, pagers, scanners Plastic display cases & signs Safety shields & goggles Airplane windows Salad bar sneeze guards Copiers and fax machines • Acrylic on tanning beds • Acrylic, fiberglass or cultured marble tubs, showers & counters

View Complete Details

Abs rod

ABS (acrylonitrile butadiene styrene) is a common thermoplastic used to make lightweight, rigid products such as automotive parts, piping and laboratory equipment. It is widely used for mechanical purposes, and also has good electrical properties. ABS is strong, rigid and tough and can withstand temperatures between -13 °F and 140 °F without affecting its impact resistance. Dimensional stability under load of ABS is excellent. ABS is resistant to aqueous acids, alkalis, hydrocholoric and phosphoric acids, alcohols and natural oils.

View Complete Details

acetal rod

Acetal products absorb a minimal amount of moisture, and their physical properties remain constant in a variety of environments. Acetals are easily machined and have excellent dimensional stability for close-tolerance machined parts. Acetal is ideally suited for applications which require strength and stiffness. Acetal shapes are produced from copolymer (Acetron® GP) and homopolymer (Delrin®) resins which provide a high modulus of elasticity coupled with great strength, stiffness and toughness. They are also characterized by a low coefficient of friction and good bearing characteristics.

View Complete Details

Clear Cast Acrylic Tube

Cast acrylic rod is regarded for its excellent optical clarity, high tensile strength, and outstanding light transmission. It is easily fabricated, shatter resistant and very durable. It replaces extruded or molded acrylics because of better machining properties, greater clarity, better resistance to heat distortion and higher tensile strength. It is unaffected by sunlight or fluorescent light and resists aging and maintains stability under a wide range of conditions.

View Complete Details

Tell Us What are you looking for? Will call you back

Contact Us

  • Kalamazoo, MI 49004, United States