Tripp Lite

United States

Floor-standing open-frame 4-post rack stores and organizes 12U of 19-inch rack equipment in small offices, retail locations and other secure IT areas with limited floor space where you need easy access to equipment.Maximum load capacity of 1, 000 lb.Secures 12U of 19 in. rack equipment up to 36 in. deepHeavy-duty steel construction designed to lastAssembles using included hardwareAccommodates toolless button mounting for PDUsThe SmartRack 12U Standard-Depth 4-Post Open Frame Rack provides an economical rack-mount solution for small offices, retail locations and other secure IT locations with limited floor space where you need equipment to be organized and easy to access. Its ideal for mounting network switches, routers, patch panels, audiovideo components and other EIA-standard 19-inch rack equipment up to 36 inches deep. Constructed from heavy-duty steel with a durable black powder-coated finish, the SR12UBEXPNDKD has a maximum load capacity of 1, 000 pounds. Stashed away under a counter, on a workbench or in a corner, this rack saves precious space and allows you fast, easy access at your immediate workspace for organizing, installing and servicing equipment and cabling. The open design allows unobstructed airflow to help keep components cool and performing at their peak. The self-squaring SR12UBEXPNDKD assembles using the included hardware. Built-in casters allow you to roll the rack into place. The vertical mounting rails have square, numbered holes and optional cable management hooks for securing equipment to the steel frame. Only user-supplied standard hand tools are required for setup. Toolless button holes accept 0U vertical installation of PDUs and cable managers. FeaturesSaves Valuable WorkspacePerfect for installing network switches, routers, patch panels and audiovideo components in secure IT areas with limited floor spaceHouses EIA-standard 19 in. rack equipment up to 36 in. deepMaximum load capacity of 1, 000 lb. Convenient Open-Frame DesignAllows fast, easy access for organizing, installing and servicing equipment and cablingRests under a counter, on a workbench or in a corner at your immediate workspaceUnobstructed airflow keeps components cool and performing at their peak Easy Assembly and InstallationHeavy-duty steel construction with durable black powder-coated finishAssembles with included hardware and user-supplied hand toolsVertical mounting rails with square, numbered holes and optional cable management hooksBuilt-in casters for rolling the rack into positionToolless button holes accept 0U vertical installation of PDUs and cable managers

45U SmartRack Premium open frame rack (no sides, doors or roof)4 interior vertical posts with unthreaded square hole openingsStandard 24" (600mm) width and 42" (1050mm) depth for optimizing floor spaceShips fully assembled3000 lb stationary 3000 lb rolling load capacityPreinstalled heavy duty 3" casters and leveling feetIncludes 50 pieces of M6 cage nuts and 50 pieces of M6 screws (equipment mounting hardware)This SmartRack 45U Standard-Depth 4-Post Premium Open Frame Rack is an expansion model with no sides, doors or roof. An expansion model is useful when baying together multiple enclosures. Its integrated baying tabs make it easy to combine multiple enclosures in rows for data center applications. The SR45UBEXPNDNR3 houses 3000 lb of standard 19-inch rack equipment in 45U. It is an expansion model that comes without sides, doors or roof. The front and rear pairs of vertical rails have square mounting holes that are adjustable in quarter-inch increments from 4 to 37 inches. Adjustment is quick and an easy-view depth index ensures consistent rail placement without requiring time-consuming measurements. Each rack space within the enclosure is numbered for ready reference and supports tool-less button-mount 0U installation of up to four compatible PDUs and cable managers. All components of the SR45UBEXPNDNR3 are grounded to the enclosure frame. Front and rear threaded grounding points are provided for connection to the facility earth ground. To simplify deployment, the SR45UBEXPNDNR3 comes with heavy duty 3" preinstalled casters that enable it to be easily maneuvered into the desired location, where it can be secured by adjusting the preinstalled levelers. Note: the casters are intended for minor position adjustments and are not designed for moving the enclosure over long distances. The SR45UBEXPNDNR3 comes with a 5-year product warranty. As part of the SmartRack family, the SR45UBEXPNDNR3 is compatible with Tripp Lites extensive range of rackmount accessories, enabling you to customize your solution to meet any requirement. FeaturesOpen frame rack with no sides, doors or roofShips fully assembled for rapid deployment and roll into place on 3" pre-installed casters (casters are removable)Front and rear sets of equipment mounting rails adjust in 14" increments. Adjustment is quick and convenient. The easy-view depth index ensures consistent rail placement without requiring time-consuming measurements.Tool-less accessory mounting rails (2 rails per enclosure) include slots for quick installation of compatible PDUs and vertical cable managers. Mounting slots are arranged in an industry-standard pattern compatible with a wide variety of accessories. Each rail can accommodate two vertical PDUs or cable managers side-by-side (four items per enclosure).Mounting hardware of 50 pieces of M6 cage nuts and 50 pieces of M6 screws includedTextured powder coat finish for tough resistance to environmental concerns such as deployment in warehouses.Maximum usable internal depth of 37 inches94 cm (front to rear rail).Weight ratings of 3000 lb stationary and 3000 lb rolling.Built in baying tabs allow premium open frame racks to be combined securely in rows. Center-to-center width can be set at 600mm or 24" to match standard data center floor tiles.Leveling feet extend to allow premium open frame racks to be positioned on uneven floors. Levelers are removable.Convenient grounding system. All components are grounded to the premium open frame rack structure which includes multiple connections for facility ground.Included stabilizing brackets are used for shipment and can be reattached at the bottom of the premium open frame rack on the inside or outside of the rack.Compatibility with all cable management accessories.

Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases45U 2-post open frame rackBlack aluminum with 12-24 threaded and numbered mounting holesToolless button holes to accept PDUs or cable managersTripp Lites TAA Compliant 45U 2-Post SmartRack Open Frame Rack is an economical way to accommodate 45U of rack space for 19-inch rackmount applications in limited spaces that do not require a lockable enclosure. Its heavy-duty, aluminum construction can safely support 800 lbs. of rackmount equipment, and its open design provides easy access to equipment and cabling. The black, textured powder coat finish makes it resistant to scratching while giving it a "classic, " attractive appearance. The SR2POSTAA is easy to install due to a self-squaring design combined with 12-24 threaded and numbered mounting positions along with bolt down provisions. It provides toolless button-hole mounting for vertical PDUs and cable managers. In high-density environments, multiple units can be bolted together side by side for easy expansion or customization. The SR2POSTAA is in full TAA (Trade Agreements Act) compliance for easy addition to GSA Schedule contracts and other government contracts, as well as EIA-compliant for vendor-neutral compatibility with 19-inch rackmount equipment. It is backed by a 5-year warranty. FeaturesSupports 800lbs of rackmount equipmentTextured powder coat finishHeavy Duty Aluminum construction12-24 threaded and numbered mounting positionsBolt down provisionsToolless button holes to accept PDUs or cable managersSelf squaring designBlack finishEasy assembly