U.S. Barricades LLC

United States

US Barricade 96" low profile airport safety barrier is a specialty barrier that is superior in strength and quality to the competition. Our barriers are designed and built in two different sizes and can be used in a variety of traffic control and security applications. Airport barriers meets or exceeds all standards under FAA Advisory Circular 150-5370-2E. All of our plastic traffic barriers are made by a rotational molding process by which a one-piece, seamless advanced plastic product is manufactured, this will give you the strongest most reliable portable traffic safety barrier made in the United States. While filled with either ballast the US Barricade airport barrier will not bulge or distort like other portable barricades and will last for years. The use of heavy equipment is not necessary for installation or relocation, all of our barricades have fork truck entries if needed, easy to move. When positioned and filled with either water or sand the barricade can act as a protective wall or prefabricated revetment wall. Mounting points for safety lights and flags are built into the barriers, lights and flags are options.

Our Airport Barricade is a cost-effective solution compliant with FAA standards for safety operations at all U.S. airports. The airport safety barricade is blow-molded with UV stabilized high density polyethylene (HDPE) plastic and 3M High Intensity Sheeting (HIP). Each airport safety barricade contains unique features that simplify assembly, installation and teardown. Made in the United States of America.

Our solar powered Elevated Runway Light medium-intensity (MIRL) has a revolutionary design that utilizes six special high intensity LED's to project a very bright omnidirectional pattern. Two inch standard thread to connect to existing bases makes this a grate solution for temporary runway lighting or replacements for damaged runway edge lights during repair. Made in the United States, the U.S. Barricades SERL63W will operate under the most demanding condition for years. Operation: To operate simply switch ON and the unit is ready for immediate operation, settings can be set to either steady-on or flashing operation. The internal solar module charges the battery during daylight hours, and at dusk the light will automatically begin operation once the ambient light threshold drops sufficiently. Flat discharge curve of battery coupled with advanced circuit design enables the light to run at constant brightness each night of operation. High-performance internal solar modules power the Lithium iron phosphate (LiFePO4) rechargeable batteries housed in a self-contained water tight compartment. Fresnel lens are made of very durable, high impact, UV stabilized LEXAN Polycarbonate, this will hold up under the most extreme conditions. Features: * Two inch standard thread for mounting* Change from steady burn or flashing mode with the 3 way switch* The only Solar light in the industry that utilizes six special high intensity LED's .* LED bulbs rated for over 100, 000 hours life span* Output 5 to 8 Candela in steady burn mode and 12 to 18 Candela in flashing mode.* Photocell controlled circuit is manually turned onoff by switch on the base of the dome* Meets and exceeds F.A.A and I.T.E. specifications* Lens and housing made with Hi-Impact UV stabilized LEXAN Polycarbonate* LiFePO4 batteries will last for years before replacement.* One year warranty.

U.S. Barricades L-810 obstruction lights are used on buildings, antennas, towers, cranes, and any other kind of obstacle which occupies airspace. Each fixture includes a glass Fresnel globe which is colored red for most applications. The fixtures are either a single or a double lamp housing and made with 34" or 1" internally threaded housing. A side-mounted option is also available. These obstruction lights operate on a 120V or 230V circuit. Electronic Controls:Single and double obstruction lights can be outfitted with electronic controls to enhance the operation, automation and reduce the maintenance cycle of the fixture. Common configurations include photocells, flashers, transfer relays and alarms. Note: flashing obstruction lights are not FAA approved. Other options and custom combinations may be available upon request. Features:Direct installation into existing voltage power circuit.Direct mounting to conduit, bottom or side mounting options available.Photocell option for automatic activation at night.Optional grounding wire available.Flashers used in fixtures are set at 45 FPM, 50% duty cycle. These fixtures are not FAA certified when flashing.Standard configurations come with 34" threaded fittings. 1" threaded and side mount configurations available on request.FAA style photocells with a 45 second time delay prevents activation and de-activation from momentary light condition.

Our Solar Airport Construction Warning Light is the only light that utilizes four LED's to project a very bright 360 degree flashing light pattern. The Airport 60 light is the number one selling light in America and is the only light in industry that comes with a one year warranty. This light is molded, assembled and manufactured in the United States of America. Utilizes 4 LEDs to project a 360 degree flashing light pattern.Internal solar panels allow light to emit through top of dome giving more visibility to pilots.Standard 2" water pipe thread allows for easy installation.Manual external onoff switch.Polycarbonate dome and base.One Year Warranty .

Econo-Light is the cost-effective solution for incandescent barricade light. The Econo-Light features an orange top case and a black bottom case. Its available in 6v spring top battery, with or without photo cell and flashing or steady burn circuits. Made in the United States, this is the most reliable barricade light in the industry. Features: 6 Volt w Photocell & Std. Mounting Hardware. Available in Flashing or Steady Burn.

Our solar powered Airport D-Light has a revolutionary design that utilizes six special high intensity LED's to project a very bright 360 degree pattern that can be viewed over two miles away. High-performance internal solar modules power the Lithium iron phosphate (LiFePO4) rechargeable batteries housed in a self-contained water tight compartment. Made of high impact UV stabilized LEXAN Polycarbonate, the Airport D-Light will operate for years under the most demanding condition. Proudly made in the United States, this is the most durable, reliable and brightest D-Light in the industry. Operation: To operate simply switch ON and the unit is ready for immediate operation, settings can be set to either steady-on or flashing operation. Once installed, the Airport Solar D-Light requires no operator intervention and will last for years under the most demanding conditions. The internal solar module charges the battery during daylight hours, and at dusk the light will automatically begin operation once the ambient light threshold drops sufficiently. Flat discharge curve of battery coupled with advanced circuit design enables the light to run at constant brightness each night of operation. Features: * The only D-light in the industry that utilizes six special high intensity LED's .* LED bulbs rated for over 100, 000 hours life span* Change from steady burn or flashing mode with the 3 way switch* Output 5 to 8 Candela in steady burn mode and 12 to 18 Candela in flashing mode.* Photocell controlled circuit is manually turned onoff by switch on the base of the dome* Meets and exceeds F.A.A and I.T.E. specifications for Type D light* Lens and housing made with Hi-Impact UV stabilized LEXAN Polycarbonate* LiFePO4 batteries will last for years before replacement.* One year warranty.

Our Airport Construction D-Type Warning Light is the only light that utilizes four LED's to project a very bright 360 degree flashing light pattern, all other company's use only two LED's. The Airport 63 light is the brightest most durable light in America and is the only light in industry that comes with a one year warranty. This light is molded, assembled and manufactured in the United States of America. Utilizes 4 LED bulbs to project an omni-directional light pattern, brightest light in the industry!Available in steady burn or flashing configurations.Two spring type 6 volt batteries will power a flashing light for up to 9 months.Photoelectrically controlled.Manual onoff switch recessed inside battery case.Polycarbonate Red dome with HD polypropylene case.One year warranty.

Our solar powered Airport D-Light with two inch threaded screw mount has a revolutionary design that utilizes six special high intensity LED's to project a very bright 360 degree pattern that can be viewed over two miles away. High-performance internal solar modules power the Lithium iron phosphate (LiFePO4) rechargeable batteries housed in a self-contained water tight compartment. Made of high impact UV stabilized LEXAN Polycarbonate, the Airport D-Light will operate for years under the most demanding condition. Proudly made in the United States, this is the most durable, reliable and brightest D-Light in the industry. Operation: To operate simply switch ON and the unit is ready for immediate operation, settings can be set to either steady-on or flashing operation. Once installed, the Airport Solar D-Light requires no operator intervention and will last for years under the most demanding conditions. The internal solar module charges the battery during daylight hours, and at dusk the light will automatically begin operation once the ambient light threshold drops sufficiently. Flat discharge curve of battery coupled with advanced circuit design enables the light to run at constant brightness each night of operation. Features: * The only D-light in the industry that utilizes six special high intensity LED's .* LED bulbs rated for over 100, 000 hours life span* Change from steady burn or flashing mode with the 3 way switch* Output 5 to 8 Candela in steady burn mode and 12 to 18 Candela in flashing mode.* Photocell controlled circuit is manually turned onoff by switch on the base of the dome* Meets and exceeds F.A.A and I.T.E. specifications for Type D light* Lens and housing made with Hi-Impact UV stabilized LEXAN Polycarbonate* LiFePO4 batteries will last for years before replacement.* One year warranty.* Made in the United States of America