My ExportersIndia

For Buyer

For Seller

For Help

VS

Viking SatCom, Inc.
location United States

Write a Review

Our Products

  1. Antenna 21 Products available
  2. Adaptors, Plugs And Sockets 3 Products available
  3. Card Laminators 3 Products available
  4. Medical Equipment & Supplies 3 Products available
  5. Position Sensor

    2 Products available
  6. Switches And Switch Boxes

    2 Products available
  7. Grinding & Milling Tools & Machinery

    2 Products available
  8. Networking Device

    2 Products available
  9. Dish Antennas

    1 Products available
  10. Others Products 94 Products available

Our Products

Our Complete range of products are LNB Power Inserter Modular Chasis, Multiswitch, Dual Axis Tracking Controller, C Band Block Downcoverter and Band Extended Frequency Motorized Feed.

Actuator Hall Effect Sensor

  • Product code TS-7821764
Replacement Hall Effect Sensor for Thomson Saginaw ActuatorsGenerates a pulse for every .033" of linear travel of the ball screw (30 pulses per inch)3 Wire
View Complete Details

LNB Power Inserter Modular Chasis

  • Product code ETL-PIRANHA
The ETL Systems Piranha series of power inserters provide DC powering options in a compact 1U high 19 chassis for a range of components and devices in satellite ground station RF and power distribution chains. Provides power for up to 16 satellite antenna LNBsVariable Voltage specified by power inserter moduleLocal Control & Monitoring via front panel push buttons & displayDual Redundant hot-swap power supplies & hot-swap power inserter modulesRemote control & monitoring via RJ45 Ethernet Port with SNMP & web brower interfaceRF Input monitoring for LNB & BUC power inserter options
View Complete Details

General Dynamics Digital Tracking Receiver

  • Product code GD-DTR-*
The General Dynamics SATCOM Technologies DigitalTracking Receiver (DTR) is a fully synthesized tracking receiver developed for satellite track-ing and uplink power control applications.This DSP-based receiver accepts wideband RF inputs, performs frequency selection, and digitally processes the selected signal. The DTR can be configured for numerous input frequency ranges from L-band to Ka-band. Multi-band applications are also readily accommo- dated. DDS techniques facilitate 1 kHz frequency resolution for any input frequency range.
View Complete Details

Radio Transition

** A high quality affordable antenna solution for the AMC-8 to AMC-18 Radio transition. Contact Viking for program pricing ** The 3.7 Meter C band Antenna Package is setup to receive C band satellites. It is supplied with a Linear Feed and PLL LNB. The antennas are used by Cable TV Headends, Radio Stations and many other operators to receive programming.
View Complete Details

Watt Antenna Package

The Viking Satcom 2.4 Meter Motorized Antenna Package allows the versatility to move the antenna from Satellite to Satellite. The antenna is motorized in Azimuth and Elevation to accurately peak up on satellite signals. The antenna controller has the capability to store up to 50 geostationary satellites in its memory. The included motorization cable connects the antenna system to the rack mounted controller. An optional web server software allows the capability to steer the antenna via a PC.
View Complete Details

Downlink Antenna Package

  • Product code VS-300DA-2C-PKG
The Viking Satcom 3.0 Meter Motorized Antenna Package is ideal for applications that require the versatility to move from Satellite to Satellite. The antenna is motorized in Azimuth and Elevation to accurately peak up on downlink signals. The 2 Port C band Motorized Feed allows remote adjustment of Polarization to achieve optimal cross pol and to downlink vertical and horizontal polarizations simultaneously. The antenna controller has the capability to store up to 50 geostationary satellites in its memory. The included Motorization Cable connects the antenna system to the rack mounted controller. An optional web server software allows the capability to steer the antenna via a PC.
View Complete Details

Ku Band Downlink Antenna Package

  • Product code VS-370DA-4CKU-PKG
The Viking Satcom 3.7 Meter Motorized Antenna Package is ideal for applications that require the versatility to move from Satellite to Satellite. The antenna is motorized in Azimuth and Elevation to accurately peak up on downlink signals. The 4 Port CKu band Motorized Feed allows remote adjustment of Polarization to achieve optimal cross pol and to downlink vertical and horizontal polarizations simultaneously. The antenna controller has the capability to store up to 50 geostationary satellites in its memory. The included Motorization Cable connects the antenna system to the rack mounted controller. An optional web server software allows the capability to steer the antenna via a PC.
View Complete Details

Meter Motorized Ku Band Uplink

  • Product code VS-380NAV-KU4W-PKG
The Viking Satcom 3.8 Meter Motorized Antenna Package allows the versatility to move the antenna from Satellite to Satellite. The antenna is motorized in Azimuth and Elevation to accurately peak up on satellite signals. The Ku band Motorized Transmit Receive Feed allows remote adjustment of Polarization to achieve optimal cross pol. The antenna controller has the capability to store up to 50 geostationary satellites in its memory. The included motorization cable connects the antenna system to the rack mounted controller. An optional web server software allows the capability to steer the antenna via a PC.
View Complete Details

Band Downlink Antenna Package

  • Product code VS-500DA-4CKU-PKG
The Viking Satcom 5.0 Meter Motorized Antenna Package is ideal for applications that require the versatility to move from Satellite to Satellite. The 5.0 Meter reflector size allows for the most signal strength at affordable pricing. The antenna is motorized in Azimuth and Elevation to accurately peak up on downlink signals. The extended Azimuth travel of over 200 allows for full view of the arc. The 4 Port CKu band Motorized Feed allows remote adjustment of Polarization to achieve optimal cross pol and to downlink vertical and horizontal polarizations simultaneously. The antenna controller has the capability to store up to 50 geostationary satellites in its memory. The included Motorization Cable connects the antenna system to the rack mounted controller. An optional web server software allows the capability to steer the antenna via a PC.
View Complete Details

Band Motorized Feed Assembly

  • Product code FEED-4CKU-MOTO
Prime Focus 4 Port CKu band Linear Polarization Motorized Feed AssemblySimultaneous Reception of Dual C & Dual Ku Band PolaritiesC Band: 3.7-4.2 GHzKu Band: 11.7-12.75 GHzUniversal Mounting - For use with New Antennas or Upgrading Legacy SystemsAvailable in Linear, Circular and Wideband Frequencies 24 volt Motor and Potentiometer for Fine Polarization AdjustmentIdeal for use with Research Concepts Controllers*NEW* Extended Band Version Available - See FEED-4CKU-MOTO-EXT
View Complete Details

Ku Band Motorized Feed Assembly

  • Product code FEED-2KU-MOTO
Prime Focus 2 Port Ku Band Linear Motorized Receive Only FeedKu Band: 10.7 - 12.75 GHz24 Volt Motor and Potentiometer for Fine Polarization AdjustmentIdeal for Use with Research Concepts ControllersFor New Antennas or Upgrading Existing Antennas in the Field
View Complete Details

Dual Axis Controller

  • Product code RC2000A
RC2000A Dual Axis Antenna ControllerFor use with Dual Axis AntennasAutomatic PositioningStores up to 50 preset and polarization combinationsIdeal for use with Thomson Saginaw ActuatorsOptional control for 24 Volt Feeds such as the FEED-4CKUMOTOHigh Resolution Pulse Sensor Interface Serial Interface to allow automated controlTracking option availableOptional Web Server based software (RCWEBSVR)
View Complete Details

Viking Satcom

  • Product code VS-LNB-P3742-5
3.7-4.2 GHz Input FrequencyNon Extended C band PLL LNB25K Noise Temperature5 kHz LO StabilityF Connector
View Complete Details

Automatic Dehydrator

  • Product code ETI-24658
The Environmental Technology ADH NETCOM automatic dehydrator supplies low pressure air to keep waveguide and coaxial cable dry to ensure signal qualityFront Panel Display OptionThe ADH NETCOM automatic dehydrator is Ethernet network ready. Units can be configured and monitored using either built in SNMP support or the web interfacePower: 100-240 VACHighly configurable to meet the needs of wide ranging applicationProgrammable operating pressure range: 0.10 psig - 7.50 psig (7mbar - 517mbar)Brushless compressor for long lifeFuture proof software based features allow updates and upgrades while in serviceRemote monitoring and control with web interface or SNM Ethernet, RS-422485, RS-232 and alarm relay outputs for compatibility with nearly any systemLow energy use minimizes operational costs
View Complete Details

De-icing Systems For Satellite Antennas

  • Product code DE-ICE
Satellite Antenna Electric De-icing Heater System for Satellite AntennasAutomatic System that will activate Feed and Reflector Heaters when the temperature falls below 40F and moisture is presentSimple, Field Installable Heater PadsIncludes Feed De-icer Available in Half and Full Reflector optionsVoltage Options: 240 Single Phase, 208 3 Phase or otherUser Selectable Controller: Automatic, Off or Manual On ModesAntenna Brands: Comtech Antenna, Superior Satellite Antenna, Channel Master, ASC Signal, Skyware Global and other brandsContact Viking for specific antenna requirements
View Complete Details

Meter Quick Deploy

  • Product code 1138-111-2
The General Dynamics SATCOM Technologies lightweight 1.2-meter Quick Deploy antennas are designed for worldwide transmit and receive operation in C, X, Ku and Ka-band. These portable antennas consist of Precision Compression Molded reflectors and a compact aluminum pedestal. This results in a durable antenna with superior stiffness and high performance under wind loading conditions. The unique shape and the accurate reflector surface provide good sidelobe and cross-polarization performance. The antenna system is a Series 1138 and the reflector consists of a two-segment SMC compression molded assembly. Repeatability is maintained with precision registration of the reflector segments and the feed support structure.
View Complete Details

Bias Tee

Provides DC Supply to high power BUC (DC Power Supply seperate) in case modem cannot supply sufficient powerAllows up to 3A of current injection in N-Connector ModelPasses L-band signalPasses or Injects 10 MHz Reference SignalVoltage: 0 to 30VSee Support Document for all options and configurations
View Complete Details

Ka Band Dual Port Linear Feed

  • Product code FEED-2KAL
Viking Satcom's new Ka band Prime Focus Feed Series is ideal for new antennas or upgrading antennas in the field. The high quality RF specifications ensure top performance when receiving Ka band frequencies. The separation on the OMT allows most Ka LNBs to be directly mounted without additional waveguide. The included Mounting Ring allows the Feeds to have universal mounting and adapt to the majority of Prime Focus Antennas.
View Complete Details

Ka Band Dual Port Offset Circular Feed

  • Frequency 17.0 - 22.0 GHz
  • VSWR 1.5:1
  • Flanges WR42 Cover
  • Product code FEED-2KAC-OF
Viking Satcom's new Ka band Offset Feed Series is ideal for new antennas or upgrading antennas in the field. The high quality RF specifications ensure top performance when receiving Ka band frequencies. The separation on the OMT allows most Ka LNBs to be directly mounted without additional waveguide. The Feeds are available in Linear, Circular and Motorized configurations. 2 Port Ka Band Receive Only Offset Circular Polarization FeedFrequency: 17.0 - 22.0 GHzFD Ratio: 0.6 to 0.8VSWR: 1.5:1Axial Ratio: 2.3 dB (18 dB Cross Pol)Flanges: WR42 CoverPolarity: DualUniversal MountingFor Use with New Antennas or Upgrading Existing Antennas in the FieldQuick Delivery
View Complete Details

Ka Band Dual Port Offset Linear Feed

  • Frequency 17.0 - 22.0 GHz
  • Product code FEED-2KAL-OF
Viking Satcom's new Ka band Offset Feed Series is ideal for new antennas or upgrading antennas in the field. The high quality RF specifications ensure top performance when receiving Ka band frequencies. The separation on the OMT allows most Ka LNBs to be directly mounted without additional waveguide. The Feeds are available in Linear, Circular and Motorized configurations.
View Complete Details

Reed Sensor Satellite Antenna Actuator

  • Product code ACT-TS-36BR
  • Power Requirement 24 to 36 VDC
Thomson Saginaw Commercial Ball Screw Satellite Antenna ActuatorActuator Stroke: 36 inchSensor Type: ReedPower Requirement: 24 to 36 VDC1500 lb capacityOptional Clamp Kit - ACT-CLAMP-HDFor New or Upgrading legacy Satellite Antenna Systems
View Complete Details

Atlantic Satellite

  • Product code ASC300-LW
L Band Satellite Beacon ReceiverInput Frequency: 930 MHz to 2300 MHzEthernet and Continuous Digital Streaming OptionsDesigned to real time track the power density of a satellite beacon and output a temperature stabilized DC voltage that is linearly proportional to the beacon power by utilizing a true, RMS-responding power detector.Applications: Antenna Tracking Controllers Uplink Power Controllers
View Complete Details

Inject DC To BUC

  • Product code VS-ABT6AC
Provides DC supply to BUC (Power Supply Separate)Passes L-Band Signal and 10 MHz15 - 64 VDC Power InputType "N" or "F" RF Interface Options
View Complete Details

L Band

  • Voltage 0 to 30V
Provides DC Supply to high power BUC (DC Power Supply seperate) in case modem cannot supply sufficient powerAllows up to 3A of current injection in N-Connector ModelPasses L-band signalPasses or Injects 10 MHz Reference SignalVoltage: 0 to 30VSee Support Document for all options and configurations
View Complete Details

C Band Block Downcoverter

  • Product code BDC-3000
C Band Block DowncoverterInput Frequency: 3.4 - 4.2 GHzLO Stability: 25 kHzNoise Figure: 10 dBConversion Gain: 40 dBPower Requirements: +15 to +24 VOutput Connector: N, F or SMA OptionsView Support Document for all options and configurations
View Complete Details

Ku Band Block Downcoverter

  • Product code BDC-1000
Ku Band Block DowncoverterInput Frequency Options: 11.70 - 12.20 GHz 12.25 - 12.75 GHz 10.95 - 11.70 GHz 11.70 - 12.75 GHz 10.70 - 11.70LO Stability: 30 kHzNoise Figure: 10 dBConversion Gain: 20 dBPower Requirements: +15 to +24 VOutput Connector: N, F or SMA OptionsView Support Document for all options and configurations
View Complete Details

Ka Band Block Downcoverter

  • Product code BDC-9000X
Ka Band Block DowncoverterInput Frequency Options: 18.2 - 19.2 GHz 19.2 - 20.2 GHz 20.2 - 21.2 GHz 21.2 - 22.2 GHzLO Stability: Phase locked to External ReferenceNoise Figure: 18 dB max (23 C)Conversion Gain: 25 dB typ.Power Requirements: +15 to +24 VOutput Connector: N, F or SMA OptionsView Support Document for all options and configurations
View Complete Details

Band BUC

  • Product code NJT5667F
NJRC NJT5667F 2 Watt C Band BUCType F Female Input ConnectorRF Output Frequency: 5.850 to 6.425 GHzIF Frequency: 950-1525 MHzOutput Power @ P1dB: 2W (+33 dBm)Power Requirement: +24 VDC (+15 to +30 VDC)Power Consumption: 37.5 W max.LED IndicatorRoHS ComplianceSmall Size & LightweightN or F ConnectorOther frequency options available
View Complete Details

Ku Band BUC

  • Product code NJT8302F
NJRC NJT8302F 3 Watt Ku Band BUCType F Female Input ConnectorRF Output Frequency: 14.0 - 14.5 GHzIF Frequency: 950 to 1450 MHzOutput Power @ P1dB: 3W (+34 dBm min)Power Consumption: 18 W typRoHS ComplianceSmallest Size & LightweightN or F ConnectorOther frequency options available
View Complete Details

C Band BUC

  • Product code NJT5667
NJRC NJT5667 2 Watt C Band BUCType N Female Input ConnectorRF Output Frequency: 5.850 to 6.425 GHzIF Frequency: 950-1525 MHzOutput Power @ P1dB: 2W (+33 dBm)Power Requirement: +24 VDC (+15 to +30 VDC)Power Consumption: 37.5 W max.LED IndicatorRoHS ComplianceSmall Size & LightweightN or F ConnectorOther frequency options available
View Complete Details

Motorization Cable

  • Product code CAB-15MOT
15 Lead Power and Sensor Motorization CableFor use with Single or Dual Axis Antenna Systems with Motorized FeedsOne cable run contains enough wire for 2 Actuators (+sensors) and Motorized FeedsDirect BurialApproximate Outside Diameter: .58"Pricing is Per Foot
View Complete Details

Dual LNB Power Inserter

  • Product code PM-DPI
Supplies DC Voltage to CKu or DSS LNBsOperating Frequency 400 2150MHz2 Independent PathsIsolation 65dBIncludes Plug-in External Power Wall Adapter
View Complete Details

Satellite Antenna Snow Covers

  • Product code COVER-CS
Helps Prevent the Loss of Signal Due to Snow and IceMaterial - 15oz Non Tear VinylAntenna Types: Patriot Antenna, Comtech, Prodelin, DH Satellite, ASC Signal, General Dynamics, Superior Satellite and Many Others.Antenna Sizes: 60cm to 7.5 MeterPrevents the Heat of the Sun from Focusing on the ElectronicsCustom covers availableGood Quality Cover
View Complete Details

Band Flexible Waveguide

  • Product code WAV-FLX-TW-75-CVCG-12
Ku-Band Twistable Flexible WaveguideWaveguide Size: 75Length: 12 InchesFlanges: 1 Cover Flat 1 Cover with O Ring Groove (other flange options available upon request)Flange Material: BrassConstruction: Silver Clad Brass with a Standard Neoprene JacketOther Finishes and Jackets are avilable upon request
View Complete Details

X Band Flexible Waveguide

  • Product code WAV-FLX-TW-112-CVCG-24
X Band Twistable Flexible WaveguideWaveguide Size: 112Length: 24 InchesFlanges: 1 Cover Flat 1 Cover with O Ring Groove (other flange options available upon request)Flange Material: BrassConstruction: Silver Clad Brass with a Standard Neoprene JacketOther Finishes and Jackets are avilable upon request
View Complete Details

Single Axis Controller

  • Product code RC1500A
RC1500A Single Axis Antenna ControllerFor use with Polar Mount AntennasAutomatic PositioningIdeal for use with Thomson Saginaw ActuatorsOptional control for 24 Volt Feeds such as the FEED-4CKUMOTOHigh Resolution Pulse Sensor Interface Tracking option availableOptional Web Server based software (RCWEBSVR)
View Complete Details

Dual Axis Tracking Controller

  • Product code RC2000C
RC2000C Dual Axis Inclined Orbit Tracking Antenna ControllerFor use with Dual Axis AntennasProvides tracking for inclined Orbit Satellites via, Step Track, Search and Memory AlgorithmsAutomatic PositioningIdeal for use with Thomson Saginaw ActuatorsOptional control for 24 Volt Feeds such as the FEED-4CKUMOTOHigh Resolution Pulse Sensor Interface Serial Interface to allow automated control
View Complete Details

Research Concepts

  • Product code RC2KPOL
24 volt Feed DriveFor use with RC1500A, RC2000A and RC2000C Controllers and Feeds with 24 volt Motors with Potentiometer Feedback
View Complete Details

Research Concepts Flyaway Companion

The days of endlessly searching the sky with your Flyaway antenna are over. The RC300 Flyaway Companion brings all the power of Auto Acquisition solutions to the non-motorized Antenna. Calculates Satellite pointing angle from anywhere Positively identify satellites from the DVB Satellite Signature Measures both Broadband RF Power and DVB Carrier Level Realtime Antenna Heading and Elevation Angles with active Indicators to target Intuitive Graphical User Interface, no training required Convenient Display, any Web Browser Self powers the LNB, no other equipment required to position the antenna on the satellite Updatable Satellite database
View Complete Details

Walton Ice Quake Snow Shield System

The Ice Quake system (U.S. patent pending) enhances the reliability of the Snow Shield Systems by a factor of 185 percent. The Ice Quake System also acts as a Rain Shield to prevent water from sheeting on the antenna reflective surface causing rain fade on a Ku or Ka band antenna. Snow Shield Ice Quake System to remove snow, ice and waterFor use in conjunction with Snow Shields (COVER-KYNAR, COVER-TEDLAR, COVER-PTFE)Reflector Sizes: .60 to 6.3 MeterAutomatic System
View Complete Details

De-icing Systems

  • Product code DE-ICE DH
Satellite Antenna Electric De-icing Heater System for DH Satellite AntennasAutomatic System that will activate Feed and Reflector Heaters when the temperature falls below 40F and moisture is presentSimple, Field Installable Heater PadsIncludes Feed De-icerAvailable in Half and Full Reflector optionsVoltage Options: 240 Single Phase, 208 3 Phase or otherUser Selectable Controller: Automatic, Off or Manual On ModesDH Reflector Sizes: 3.0, 3.3, 3.7, 3.8, 3.9, 4.2, 4.5 and 5.0 MeterContact Viking for New Insulating Foam Back Cover OptionQuick Delivery
View Complete Details

ADH-NETCOM

  • Model Number ETI-23437
  • Power 100-240 VAC
The Environmental Technology ADH NETCOM automatic dehydrator supplies low pressure air to keep waveguide and coaxial cable dry to ensure signal qualityThe ADH NETCOM automatic dehydrator is Ethernet network ready. Units can be configured and monitored using either built in SNMP support or the web interfacePower: 100-240 VACHighly configurable to meet the needs of wide ranging applicationProgrammable operating pressure range: 0.10 psig - 7.50 psig (7mbar - 517mbar)Brushless compressor for long lifeFuture proof software based features allow updates and upgrades while in serviceRemote monitoring and control with web interface or SNM Ethernet, RS-422485, RS-232 and alarm relay outputs for compatibility with nearly any systemLow energy use minimizes operational costs
View Complete Details

EDH-5 Dehydrator

  • Model Number ETI-24894
  • Power 100-240 VAC
The EDH-5 low pressure air dehydrator meets the need for performance from your remote or mobile antenna transmission line, no matter where or how small it is. Well suited for Ku and Ka band applications, the EDH-5 is engineered as a go-anywhere, low cost, manually regenerated dehydrator for pressurixing small volume waveguide and coax. The Environmental Technology EDH-5 keeps waveguide and coax dry to improve earthbase station reliabilityIndoor or outdoor operationSimple one-button operation; 2 digit, 7 segment displayQuiet operation: up to 36 dBPower: 100-240 VACFlow Rate: 4.77 scf (510 liters)
View Complete Details

ADH-SIROCCO

  • Model Number ETI-24434
The Environmental Technology ADH Sirocco automatic dehydrator supplies low pressure air to keep waveguide and coaxial cable dry to ensure signal quality Highly configurable to meet the needs of wide ranging application Programmable operating pressure range: 0.10 psig - 7.50 psig (7mbar - 517mbar) Brushless compressor for long life Small, light weight chassis with multiple mounting options Low energy use minimizes operational costs Simple power connections for 100-240VAC Quiet Operation Part Number #24434: ADH Sirocco Automatic Dehydrator, 100-240 VAC
View Complete Details

Band Dual Port Linear Feed

  • Series FEED-2KAL
Viking Satcom's new Ka band Prime Focus Feed Series is ideal for new antennas or upgrading antennas in the field. The high quality RF specifications ensure top performance when receiving Ka band frequencies. The separation on the OMT allows most Ka LNBs to be directly mounted without additional waveguide. The included Mounting Ring allows the Feeds to have universal mounting and adapt to the majority of Prime Focus Antennas. The Feeds are available in Linear, Circular and Motorized configurations. 2 Port Ka Band Receive Only Prime Focus Linear FeedFrequency: 17.0 - 22.0 GHzVSWR: 1.5:1Polarization Isolation: 35 dB (Typ.)Flanges: WR42 CoverPolarity: DualUniversal MountingFor Use with New Antennas or Upgrading Existing Antennas in the Field
View Complete Details

Band Motorized Feed

  • Model Number FEED-VS-180KLMOT
Mounts to Prodelin 1184-350 Series Ku Band AntennaKu Band Transmit and Receive or Receive Only OptionsField Replaceable ComponentsKu Band Rx: 10.7 - 12.75 GHzKu Band Tx: 13.75 - 14.5 GHzRotation 280All Components Weather Resistant Flanges: WR75 CoverFor New Antennas or Upgrading Existing Antennas in the FieldIdeal for Use with Research Concepts Controllers
View Complete Details

Band Motorized LP CP Feed

  • Model Number FEED-2C-CPOR1-MOTO
Prime Focus 2 Port C Band Motorized Switchable Linear Polarization to Circular Polarization Receive Only Feed AssemblyMotor 1 Switches from Linear to Circular PolarizationMotor 2 Adjusts Linear Polarization AngleC Band: 3.4 - 4.2 GHz24 Volt MotorsPotentiometer for Fine Polarization AdjustmentUniversal Mounting - For Use with New Antennas or Upgrading Legacy SystemsHard Coat Anodized Aluminum Gears for Wear ProtectionIdeal for Use with Research Concepts Controllers
View Complete Details

Band Extended Frequency Motorized Feed

  • Model Number FEED-4CKU-MOTO-EXT
4 Port CKu band Extended Frequency Linear Polarization Motorized Feed Assembly for Prime Focus AntennasSimultaneous Reception of Dual C & Dual Ku Band PolaritiesC Band: 3.4 - 4.2 GHzKu Band: 10.7-12.75 GHzUniversal Mounting - For use with New Antennas or Upgrading Legacy Systems24 volt Motor and Potentiometer for Fine Polarization AdjustmentIdeal for use with Research Concepts Controllers
View Complete Details

Band Circular Linear Feed

  • Model Number FEED-VS-RP3CP300
Prime Focus Single Port C band Circular Linear Switchable FeedExtended C band: 3.4 - 4.2GhzfD Range: .335 to .425Axial Ratio (Circular): 1.9 TypicalManually Switchable from C band Circular to LinearUniversal MountingFor use with New Antennas or Upgrading existing AntennasPrice: $345.00 Request a QuoteEmail to see if you qualify for better pricing
View Complete Details

Band Dual Port Circular Feed

  • Model Number FEED-2KAC
Viking Satcom's new Ka band Prime Focus Feed Series is ideal for new antennas or upgrading antennas in the field. The high quality RF specifications ensure top performance when receiving Ka band frequencies. The separation on the OMT allows most Ka LNBs to be directly mounted without additional waveguide. The included Mounting Ring allows the Feeds to have universal mounting and adapt to the majority of Prime Focus Antennas. The Feeds are available in Linear, Circular and Motorized configurations. 2 Port Ka Band Receive Only Prime Focus Circular FeedFrequency: 17.0 - 22.0 GHzVSWR: 1.5:1Axial Ratio: 2.3 Flanges: WR42 CoverPolarity: DualUniversal MountingFor Use with New Antennas or Upgrading Existing Antennas in the FieldQuick Delivery
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us