Post Buy Requirement
VO
United States
Add Review

Our Products

IONIZING AIR KNIVES

  • Model 981-6
  • Length, inches 6
  • Ionizing(1) Yes
  • Number of Air Inlets 1
These knives add a static neutralizing bar, to discharge static to clean surfaces of dust, shavings and debris more effectively. The static neutralizing bar generates positive and negative charged ions that are carried to the target in a uniform sheet of amplified air. Ionizing Air Knives kill the static build up that can attract dust and contaminants that ruin a painted or coated surface; and stop static discharges which can damage electronic equipment and shock personnel.

BUY NOW
View Complete Details

Air Jets

  • Model Number 901A
  • Duct Diameter, inch 0.75
Jets are round-throated air amplifiers: one end provides a strong airflow while the other creates suction as free air is entrained. As the free air is entrained, jets amplify air volume up to 25 times more than the compressed air supplied, resulting in less compressed air usage to deliver the same or greater thrust performance.

Jets are designed to reduce compressed air consumption and noise drastically as compared to open jets, copper tubes and iron or steel pipes without an engineered nozzle. Perfect for all types of blow off, conveying, cooling and drying applications, jets are available in a variety of high and low thrust models. Since they output a more concentrated, targeted volume of air than nozzles, they are ideal for water, solvents or light oil stripping applications. Additionally, because they deliver a precise air flow, jets are ideal for parts movement and ejection, with a focused air flow targeted directly on the parts being moved or ejected. Vortec Jets meet OSHA specification for noise and dead-end pressure.
View Complete Details

ALUMINUM AIR KNIVES

  • Model 921-3
  • Length, inches 3
  • Number of Air Inlets 1
Air Knives deliver a flat sheet of amplified air designed to:

Efficiently blow off water and debris from wide surfaces
Provide high speed drying or cooling
Kill static, with an added static neutralizing bar on the Ionizing Air Knife.

Air Knives are air amplifiers, using a small amount of filtered compressed air to deliver a powerful, high velocity, laminar sheet of air over wide areas such as moving webs, film, sheets, strips, auto bodies and other large assemblies and objects. Vortecs patented design produces increased thrust and velocity, reduced noise and excellent uniformity.



These knives add a static neutralizing bar, to discharge static to clean surfaces of dust, shavings and debris more effectively. The static neutralizing bar generates positive and negative charged ions that are carried to the target in a uniform sheet of amplified air. Ionizing Air Knives kill the static build up that can attract dust and contaminants that ruin a painted or coated surface; and stop static discharges which can damage electronic equipment and shock personnel.
View Complete Details

THREAD GUARD

  • Overall Length 5 7/8
  • Diameter 1 1/8
  • Nozzle Length 5
The Vortec Thread Guard was designed specifically for industrial sewing applications. It keeps needles cool to reduce heat-related needle breakage and thread burning. The air stream is especially effective on difficult sewing surfaces such as belt loops and waist bands; or on tough materials like denim or canvas. Cold air temperature and flow rate are preset to 10 deg F (-12 deg C) and 4 scfm (113 slpm).

BUY NOW
View Complete Details

COLD AIR PISTOL

  • Overall Length 13
  • Diameter, inch 3/8
The Vortec Cold Air Pistol offers an ergonomic, easy to use and more mobile, and less costly alternative to the Cold Air Gun for intermittent spot cooling.

The lightweight pistol features an integral trigger mechanism for an onoff squeeze action that can be aimed at the target site; and provides cool air as low as 0 deg F (-17.78 deg) at a flow rate of 9 cfm.

The pistol is ideal for repair shops, industrial MRO, and machine tool shops, or anywhere that 100 psi compressed air is available and intermittent spot cooling is needed.

The cold air pistol will cool parts quickly and with no liquid mess, so that your jobs can be started and completed faster.
View Complete Details

DUAL NOZZLE MINI CAG

  • Overall Length 18 5/8
  • Diameter 1 3/4
  • Nozzle Length 8
Cold Air Guns utilize vortex tube technology and filtered compressed air to generate sub-freezing air as low as -30 deg F (-34 deg C) for various industrial spot cooling applications. With no moving parts to wear out, Cold Air Guns require no electricity at the target, just a compressed air source.

Cold Air Guns are predominantly used for cooling of metal parts, in the machining and repair of metals, plastics, wood, ceramics and other materials. Cold air machining performs better than mist coolants and considerably increases tool life and feed rates on dry machining operations. The efficient cooling from a Cold Air Gun can prevent heat-related parts growth while bettering parts tolerance and surface finish quality.

The Mini Cold Air Gun is engineered for applications where the standard Cold Air Gun is too large to fit, or where compressed air flow is limited. The Mini Cold Air Gun uses only 8 SCFM of compressed air and produces temperatures as low as 0 deg F. The Mini Cold Air Gun is available with a single nozzle or a dual point nozzle for multi-directional cooling.
View Complete Details

AIR FLOW AMPLIFIERS

  • Model# 901XSS
  • Air Amplification 5
  • Suction End Diameter (inches) 45
Air Flow Amplifiers deliver a large airflow for conveying, drying, cooling or ventilation. These high flow, bladeless blowers have no moving parts so they are inherently safe. They amplify compressed air volumes by 12 20 fold in ducted applications and up to 60 fold in unducted applications. They are especially useful for removing metal chips and scrap, ventilating fumes or smoke, and conveying small parts, pellets, powders and dust.

As a vacuum or blow-off device, air amplifiers are more compact and less expensive than variable-speed blowers and fans, provide instant onoff performance, and operate at low noise levels to meet OSHA requirements. Air Flow Amplifiers are easily mounted and can be used in both ducted and unducted applications. They are available in several sizes, both aluminum and stainless steel and deliver flow rates from 32 to 2300 SCFM (900 to 65, 000 SLPM).
View Complete Details

Air Nozzles

  • Mode 1200
  • Thrust, oz. 3-21
  • Air stream at nozzle (inch) 5/8
  • Air stream at 12" (inch) 3.5
Vortec engineered blow off nozzles significantly reduce compressed air consumption and noise, compared to open nozzle jets. Using proven amplification technology, Vortec nozzles entrain and accelerate free surrounding air, resulting in air flow volume up to 25 times more than the volume of compressed air, giving 25 times the blow off capability at a significantly reduced energy usage and lower operating cost. And while reducing air consumption, Vortec nozzles also reduce noise levels by as much as 60%.
View Complete Details

FROST FREE COLD AIR GUNS

  • Overall Length 19 5/8
  • Diameter 1 3/4
  • Nozzle Length 9
The Frost Free Cold Air Gun eliminates the mess associated with condensation and frost arising from continuous use of a Cold Air Gun. A musthave for sensitive applications such as:

Cutting, drilling or machining of paper products, wood products, fabrics or any product that is sensitive to water
Machining of materials covered with oil or oil-based lubricants
Cold Air Guns use vortex tube technology and filtered compressed air to produce sub-freezing airas low as -30 deg F for numerous industrial spot cooling applications. With no moving parts to wear out, Cold Air Guns require no electricity, just a compressed air source.

Cold Air Guns are most often used for cooling of metal parts, in the machining and repair of metals, plastics, wood, ceramics and other materials. Cold air machining outperforms mist coolants and substantially increase tool life and feed rates on dry machining operations. The effective cooling from a Cold Air Gun can eliminate heat-related parts growth while improving parts tolerance and surface finish quality. Cold Air Guns have adjustable temperature and flow settings; and some models have a frost free nozzle to eliminate mess from frost and condensation.
View Complete Details

Cold Air Guns

  • Overall Length 18 5/8
  • Diameter 1 3/4
  • Nozzle Length 8
Cold Air Guns use vortex tube technology and filtered compressed air to produce sub-freezing airas low as -30 deg F (-34 deg C) for numerous industrial spot cooling applications. With no moving parts to wear out, Cold Air Guns require no electricity, just a compressed air source.

Cold Air Guns are most often used for cooling of metal parts, in the machining and repair of metals, plastics, wood, ceramics and other materials. Cold air machining outperforms mist coolants and substantially increases tool life and feed rates on dry machining operations. The effective cooling from a Cold Air Gun can eliminate heat-related parts growth while improving parts tolerance and surface finish quality. Cold Air Guns have adjustable temperature and flow settings; and some models have a frost free nozzle to eliminate mess from frost and condensation.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Vortec)
  • Cincinnati, OH 45242 map, United States
  • Share us via