Post Your Requirement Menu

Welcome User

Other Products / Services

We offer the best product range of Color Coded, Flat Gray PVC Cable, PVC Wire, Flexible Power Cables and hookup wire.

Color Coded

  • Temperature 105°C

Color Coded COLOR CODED RIBBON CABLE (FLAT CABLE) CHARACTERISTICS: APPLICATION: Temperature Rating: 105°C Voltage Rating: 300V Capacitance: 14 pFft. @ 1 mhz* Propogation Delay: 1.4 nsft. - .18 ns rise time pulse* Impedance: 105 ohms nom. * Crosstalk: nom. between two adjacent signal lines @ 1 ns rise time over 10 ft. length; near end 3.2%, far end 11.5% Environmental: resists acids, alkalis, oil, moisture, solvents, ozone and fungus Weico's color Flat Cable is manufactured from pre-insulated color coded conductors which are then laminated on .050 center to center spacing. this permits conventional termination using insulation displacement connectors. Color coding affords immediate identification of discrete wires for positive termination and traceability. Weico's Flat Cable is stocked in bulk (100 ftreel). DESCRIPTION: 28 AWG (736) stranded tinned copper conductor .010" nominal wall PVC Conductors laminated to a sheet of .009" clear PVC Color Code: brown, red, orange, yellow, green, blue, violet, gray, white, black Color code repeats beyond 10 Conductors UL Listed-Style 2884 Passes UL VW-1

View Complete Details

Flat Gray PVC Cable

  • Temperature 105°C

Flat Gray .010" PVC Cable GRAY RIBBON CABLE (FLAT CABLE) 105°C PVC CHARACTERISTICS: APPLICATION: Temperature Rating: 105°C Voltage Rating: 300V Capacitance: 14 pFft. nom.* Propogation Delay: 1.4 nsft. - .18 ns rise time pulse @ 1 mhz* Impedance: 105 ohms nom. * Crosstalk: nom. between two adjacent signal lines @ 1 ns rise time over 10 ft. length; near end 3.2%, far end 11.5% Environmental: resists acids, alkalis, oil, moisture, solvents, ozone and fungus Weico's gray Flat Cable is designed for general purpose applications. Because of its exacting specifications, it provides consistent reliable performance. Being ribbed on both sides permits reverse plane termination ability on the same cable length. Flexibility and excellent teardown characteristics allow intricate circuit routing and uniform breakouts for harness production. Weico's Flat Cable is stocked in build (100 Ft.Reel). DESCRIPTION: 28 AWG (736) stranded tinned copper conductor Nominal Insulation Thickness: .010" PVC Conductors on .050" centers Gray PVC with red stripe on leading edge UL Listed-Style 2651 Passes UL VW-1

View Complete Details

PVC Wire

  • Temperature -55°C to +105°C

M168781 TYPE B 600V, 105C MIL-W-168781 TYPE B-600V CHARACTERISTICS: Temperature Rating: -55°C to +105°C Voltage Rating: 600V Passes UL VW-1 Flame Test DESCRIPTION: Stranded Tinned Copper, Color Coded Polyvinylchloride Insulation

View Complete Details

Flexible Power Cables

  • Temperature -25C to + 90C

TRAY CABLE, FLEXIBLE POWER AND CONTROL CABLES DESCRIPTION: Finely stranded bare copper conductors, specially blended PVCNylon insulation; Black Numbered + GreenYellow Ground Conductors, specially formulated oil resistant black PVC Jacket. CHARACTISTICS: Temperature Rating: -25C to + 90C (UL)TC-ER 90C, 600V (UL) MTW 600V C(UL) approved for CICTC Sunlight resistance FT1 FT4 applications UL approved for Direct Burial, Sunlight and OIL I Resistant applications Suitable for use in Class I Division II hazardous locations and installations under NEC (NFPA 70) article 336 and article 670 guidelines COLOR CODE: Black Numbered Plus GreenYellow Standard Put-Ups: 100FT., 1000FT

View Complete Details

hookup wire

  • Temperature -55°C to +105°C

UL1429, UL1534, CSA AWM, 150V, 80C | Irradiated PVC Tinned Copper Wire UL1429 & CSA MIL-W-168781 TYPE B IRRADIATED 1429 CHARACTERISTICS: Temperature Rating: MIL-W-16878: -55°C to +105°C UL 1429: +80°C Voltage Rating: MIL-W-16878 Type B: 600 Volts UL Style 1429: 150 Volts DESCRIPTION: Stranded Tinned Copper, Irradiated PVC Insulation

View Complete Details

Formvar coil wire

  • NEMA Standard (MW 1000) MW-15-C (Round) MW-18-C (Sq & Rect)

Formvar 105C MW-15C-JW11774B CL-105 Thermal Class 105 Insulation Characteristics: Excellent flexibility and abrasion resistance. Will withstand excessive tension during widing, should be annealed prior to varnishing to avoid crazing. Requires mecnanical or chemical stripping. General Applications: Motors, coils oil filled and dry transformers, armature and generator windings. NEMA Standard (MW 1000): MW-15-C (Round) MW-18-C (Sq & Rect) Federal Spec. (JW 1177B): JW 11774B CL-105 Types T, T2, T3, T4 (Round) JW 117716B CL-105 Types T2, T4 (Sq & Rect) Military Spec. (MIL W 583C): Class 105 Types T, T2, T3, T4 Available in Gauges 4-60 Single or Heavy Build Insulation

View Complete Details

Solderable Polyester

  • Part Number Code _PU

Solderable Polyester MW-77C - JW 117739B CL-180 Insulation Characteristics: All the characteristics of polyurethane 130ºC plus the increased thermal rating to class 155ºC, solderable at 680ºF. General Applications: R.F. coils, solenoids, encapsulated coils, motors, relays, low voltage transformers, ignition coils, layer and precision wound coils. Part Number Code: _PU NEMA Standard (MW 1000): MW-79-C Federal Spec. (JW 1177B): JW 117741B CL-155 SPU, SPU2, SPU3, SPU4 Military Spec. (MIL W 583C): None Available in Gauges 4-60 Single or Heavy Build Insulation

View Complete Details

Polyurethene Enameled Copper Wire

  • Part Number Code _PU

Polyurethene MW-79C - JW 117741B CL -155 - CLASS 155 Insulation Characteristics: All the characteristics of polyurethane 130ºC plus the increased thermal rating to class 155ºC, solderable at 680ºF. General Applications: R.F. coils, solenoids, encapsulated coils, motors, relays, low voltage transformers, ignition coils, layer and precision wound coils. Part Number Code: _PU NEMA Standard (MW 1000): MW-79-C Federal Spec. (JW 1177B): JW 117741B CL-155 SPU, SPU2, SPU3, SPU4 Military Spec. (MIL W 583C): None Available in Gauges 4-60 Single or Heavy Build Insulation

View Complete Details

Polyester Amide-Imide

  • Part Number Code _EI

Polyester Amide-Imide 200C Insulation Characteristics: Provides outstanding windability, resistance to heat shock and tolerance to overloads. Resists most solvents and insulating varnish. Insulation Characteristics: Dry transformers, motors, automotive and hand tool armatures. Part Number Code: _EI NEMA Standard (MW 1000): MW-35-C (Round) MW-74-C (Round) Federal Spec. (JW 1177B): JW 117714B CL - 200 Types K, K2, K3, K4 JW 117743B CL - 200 Types PEAI, PEA2, PEA3, PEA4 Military Spec. (MIL W 583C): Class 200 Types K, K2, K3, K4 Class 200 Types PEAI, PEA2, PEA3, PEA4 Available in Gauges 4-60 Single or Heavy Build Insulation

View Complete Details

Polyurethane Nylon

  • Part Number Code _PN

Polyurethane Nylon MW-80C - JW 117742B CL-155 Insulation Characteristics: All the characteristics of polyurethane 130ºC plus the increased thermal rating to class 155ºC, solderable at 680ºF. Insulation Characteristics: Toroid coils, encapsulated coils, relays, clock and timer coils, solenoids, appliance motors. Part Number Code: _PN NEMA Standard (MW 1000): MW-80-C Federal Spec. (JW 1177B): JW 117742B CL-155 SPUN, SPUN2, SPUN3, SPUN4 Military Spec. (MIL W 583C): None Available in Gauges 4-60 Single or Heavy Build Insulation

View Complete Details

polyimide

  • Part Number Code _ML

Polyimide 220C, MW-16C Insulation Characteristics: Exceptional resistance to solvents and burnout, able to withstand excessive overloads, unaffected by continued exposure to varnish solvents. Insulation Characteristics: High temperature continuous duty coils, motors, encapsulated coils, heavy duty hand tool motors. Part Number Code: _ML NEMA Standard (MW 1000): MW-16-C (Round) MW-20-C (Sq. & Rect.) Federal Spec. (JW 1177B): JW 117715B CL-220 Types M, M2, M3, M4 (Round) JW 117718B CL-220 Types M2, M4 (Sq. & Rect.) Military Spec. (MIL W 583C): Class 220 Types M, M2, M3, M4 * Registered trademark DuPont Corp. Available in Gauges 4-60 Single or Heavy Build Insulation

View Complete Details

SHIELDED CORDS

3 CONDUCTOR, SHIELDED CEE COLORCODING DESCRIPTION APPLICATIONS: Stranded Bare Copper Conductors Color Coded PVC or Rubber Insulation PVC (SVT-SJT) , Rubber (SV-SJ) Or Neoprene (SJO) Jacket One End Fitted With Molded Three Prong Male Plug, Other End Has Jacket and Conductors Stripped Back Shielded or Unshielded As Indicated In Table Type SV-SVT: Small Tools, Business Machines, Light-duty Equipment Type SJ - SJT - SJO: Heavier Duty Tools, Electric Saws, Small Motors, Grinders, Saws, Sanders

View Complete Details

SHIELDED EXTENSION CORDS

SHIELDED EXTENSION CORDS EXTENSION CORDS, DETACHABLE 3 CONDUCTORS N.A. COLOR CODING CEE COLOR CODING DESCRIPTION: One End Fitted With Molded Three Prong Male Plug, Other End Fitted With Molded Female Receptable. Shielded or Unshielded As Indicated In Table

View Complete Details

UNSHIELDED EXTENSION CORDS

EXTENSION CORDS DETACHABLE 3 DONDUCTORS NA COLOR CODING CEE COLOR CODING DESCRIPTION One End Fitted With Molded Three Prong Male Plug, Other End Fitted With Molded Female Receptable. Shielded or Unshielded As Indicated In Table

View Complete Details

Overall Foil Shield

  • VOLTAGE 2464, 80°C, 300V

MULTIPAIR FOIL SHIELD 300V - 22 GUAGE DESCRIPTION SPECIFICATIONS: Each Conductor is Stranded (730) Tinned Copper, Nominal Insulation Thickness .010" Color Coded Polyvinylchloride (UL Style 1061) Insulated. Twisted into pairs. Overall AluminumPolyester Shield with Stranded Tinned Copper Drain Wire, Nylon Rip Cord for Ease of Jacket Stripping, Gray PVC Jacket Overall. UL Listed, NEC Type CM, 75°C UL AWM Style 2464, 80°C, 300V CSA Certified PCC FT-4 OSHA Acceptable

View Complete Details

Plenum-CL2P Coaxial Cables

  • Temperature -90°C to +200°C

Plenum-CL2P COAXIAL CL2P (NEC-725-2B) CHARACTERISTICS: High Transmission Speed Allows Longer Cable Lengths in Computer Systems Can Be Installed in Air Ducts And Plenums Without Conduit UL Listed Temp Range: -90°C to +200°C DESCRIPTION: Fluoropolymer Coaxial Cables are made to the most exacting specifications in the wire and cable industry. WEICO'S designs and standards allow for dramatic improvements in critical data communications electrical characteristics such as: signal speed, attenuation, and capacitance.

View Complete Details

Polyethylene Dielectric

  • Series MIL-C-17

Polyethylene Dielectric Per MIL-C-17 MIL-C-17 COAXIAL CABLE (POLYETHYLENE DIELECTRIC) COAXIAL CABLE

View Complete Details

SHIELDED FIRE ALARM

SHIELDED FIRE ALARM FIRE ALARM-FPLP (NEC-760-4d) - SHIELDED DESCRIPTION Each Conductor Solid Tinned Copper, Color Coded Fluoropolymer Resin Insulated, Twisting Pair Overall Aluminum Foil Shield (100% coverage) Drain Wire, Fluoropolymer Jacket Overall.

View Complete Details

MULTIPAIR DUAL SHIELD LOW CAPACITANCE

  • VOLTAGE 80°C, 30V

MULTIPAIR DUAL SHIELD LOW CAPACITANCE 80°C - 30V DESCRIPTION SPECIFICATIONS: Each Conductor is Stranded (732) Tinned Copper, Color Coded Foam Polyolefin Insulation, Conductors Twisted into Pairs, Mylar supported Aluminum Foil Shield with Drain Wire, Overall Tinned copper Braid Shield, 65% minimum coverage Gray PVC Jacket Overall. COLOR CODE Click Here To Download The Spec Sheet UL Listed, NEC Type CM UL AWM Style 2919 80°C, 30V Nominal Capacitance Between Conductors: 12.5pFft

View Complete Details

Twisted Pair Cables

  • Voltage 20 AWG :80°C, 300V 16 AWG :60°C, 300V 14-12 AWG :90°C, 600V

20 AWG Thru 12 AWG TWISTED PAIR UNSHIELDED DESCRIPTION SPECIFICATIONS: Each Conductor is Stranded Tinned High Conductivity Copper, 20 AWG Nominal Insulation Thickness .013" 16 AWG Nominal Insulation Thickness .023" 14 AWG Nominal Insulation Thickness .031" 12 AWG Nominal Insualtion Thickness .032" Color Coded Polyvinylchloride Insulation, Gray Polyvinylchloride Jacket Overall Temperature - Voltage Rating 20 AWG :80°C, 300V 16 AWG :60°C, 300V 14-12 AWG :90°C, 600V

View Complete Details

Braid Shielded

  • Thickness .015"

MULTICONDUCTOR BRAIDED SHIELD 80ºC PEPVC - 600V CHARACTERISTICS: Temperature Rating: -20°C to +80°C Suggested Working Voltage: 600V DESCRIPTION: Each conductor is 2634 of Stranded Tinned Copper, Nominal Insulation Thickness is .015", Color Coded Polyethlene Insulation, Cabled with Fillers where necessary, Mylar Wrap, Braided Tinned Copper Shield, Gray Polyvinylechloride Jacket Overall

View Complete Details

Dual Shield CABLES

  • Voltage 80°C - 300V

MULTICONDUCTOR DUAL SHIELD APPLICATIONS: DESCRIPTION: Semi-ridge PVC Insulation 24 AWG (7x32) TC Conductors Overall Foil Shield (100% coverage) + TC Braid Shield (65% min coverage) UL Listed, NEC Type CMG UL AWM Style 2464 80°C - 300V

View Complete Details

magnashield

  • VOLTAGE UL AWM Style 2464, 80°C, 300V

MULTICONDUCTOR MAGNASHIELD 80º - 300V DESCRIPTION SPECIFICATIONS: Each Conductor Stranded Tinned Copper, #22 Stranded (730) Nom. Ins. Thickness .010" #18 Stranded (1630) Nom. Ins. Thickness .017" #16 Stranded (1929) Nom. Ins. Thickness .017" Color Coded Polyvinylchloride Insulation, MAGNAShield (Aluminum Foil PolyesterAluminum Foil with Drain Wire and Tinned Copper Braid) Nylon Rip Cord for Ease of Jacket Stripping, Gray PVC Jacket Overall. UL Listed, NEC Type CM, 75°C UL AWM Style 2464, 80°C, 300V CSA Certified PCC FT-4 OSHA Acceptable Meets FCC Docket 20780 MIL-STDS 461 & 462B and Tempest

View Complete Details

FOIL SHIELD

  • SERIES CL2P

FOIL SHIELD - CL2P CL2P - (NEC-725-2B) (NON - CONDUIT) SHIELDED - UNSHIELDED PAIRED - UNPAIRED DESCRIPTION: APPLICATION: Conductors Tinned or Bare Copper, Insulated with Fluoropolymer Resin, Conductors Cabled, Overall Foil Shield (100% Coverage), Drain Wire, Extruded Fluoropolymer Transparent Jacket Overall. Computer Interconnect, Instrumentation and Control, Business Machines and Remote Control Signaling.

View Complete Details

UNSHIELDED PAIRED CABLES

  • SERIES CL2P

UNSHIELDED - CL2P CL2P - (NEC-725-2b) (NON-CONDUIT) SHIELDED - UNSHIELDED PAIRED - UNPAIRED DESCRIPTION: APPLICATION: Conductors Tinned or Bare Copper, Insulated with Fluoropolymer Resin, Conductors Paired, Unshielded, Drain Wire, Extruded Fluoropolymer Transparent Jacket Overall. Computer Interconnect, Instrumentation and Control, Business Machines, and Remote Control Signaling.

View Complete Details

Flat Braid

  • SERIES QQ-B-575 F

FLAT BRAID QQ-B-575 F ASTM-B-33 DESCRIPTION: APPLICATION: Tinned Copper Strands Woven And Rolled Flat At Time of Manufacture To Specific Width Depending on Construction Click Here To Download The Spec Sheet Used For Bonding, Straps, Grounding or Connecting Moving Parts. Recommended For High Current.

View Complete Details

tubular

  • SERIES QQ-B-575 R

Tubular TUBULAR BRAID QQ-B-575 R ASTM-B-33 DESCRIPTION: APPLICATION: Tinned Copper Brid Woven in Completely Round Configuration as Outlined in SPEC QQ-B-575. Used As Both Shielding and Protective Covering. Shielding is 95% Or More When Placed Over Equivalent Diameter Mandrel To The Inside Diameter of Tubular Braid.

View Complete Details

Silver Tin Bare Copper

Bare Copper| Hookup WIre | Solid Electrolytic Soft Drawn & Annealed SOFT DRAWN BUS MIL-W-3861 TYPE S QQ-W-343 TYPE S ASTM-B-33 DESCRIPTION: APPLICATION: Electrolytic, Soft Drawn and Annealed, Solid Bare Copper

View Complete Details

PVC Hookup Wire

  • Temperature -40°C to +105°C

Prebonded UL1007-UL1569, 300V, 105C | PVC Hookup Wire PREBONDED UL1007 - UL1569 UL1007 UL1569 CSA TR-64 1007 CHARACTERISTICS: APPLICATION: Temperature Rating: -40°C to +105°C Voltage Rating: 300V Passes UL VW-1 Flame Test The Prebond conductor maintains much of the flexibility of an ordinary stranded wire but reduces processing and handling costs on soldering, retwisting of strands after stripping and hand tinning operations. Prebonded is the most flexible of the bonded constructions. DESCRIPTION: Tinned copper strands twisted together and heated causing the tin to flow, fusing the conductor along its entire length., .016" Nominal Insulation Thickness

View Complete Details

Kynar Insulated Hookup Wire

  • Temperature +125°C (UL Rated at 105°C)

UL1423 – SOLID CONDUCTOR, WIRE-WRAP, 105C | Kynar Insulated Hookup Wire UL1423 KYNAR INSULATED SOLID CONDUCTOR 1423 CHARACTERISTICS: Temperature Rating:+125°C (UL Rated at 105°C) High Cut-thru and Abrasion Resistance Passes UL VW-1 Flame Test DESCRIPTION: Solid Silver Plated Copper, Oxygen-Free, High Conductivity (OFHC) Copper Conductor Kynar Insulation.

View Complete Details

PTFE Hookup Wire

  • Temperature -60°C to +200°C

Type E M168784 UL1213 Solid Hook Up Wire | PTFE Insulated Wire | UL Approved Wire TYPE E - 600V MIL-W-168784 SOLID CONDUCTOR UL1213 1213 CHARACTERISTICS: Temperature Rating: MIL-W-16878: -60°C to +200°C UL 1213: +105°C Voltage Rating: MIL-W-16878: 600V UL 1213: Not Rated Passes UL VW-1 Flame Test DESCRIPTION: Solid Silver Plated Copper, Extruded PTFE Insulation.

View Complete Details

UL Approved Wire

  • Temperature -60°C to +200°C

Type ET M168786 UL1371 Solid Hookup Wire | PTFE Insulated Wire | UL Approved Wire TYPE ET - 250V MIL-W-168786 SOLID CONDUCTOR UL1371 1371 CHARACTERISTICS: Temperature Rating: -60°C to +200°C Voltage Rating: 250V Passes UL VW-1 Flame Test DESCRIPTION: Solid Silver Plated Copper, Extruded PTFE Insulation

View Complete Details

Cross-Linked Hookup Wire

  • Temperature -55°C to +150°C

M2275916 ETFE, 600V, 150C | Cross-Linked Hookup Wire | PVF MIL-W-2275916 ETFE CHARACTERISTICS: Temperature Rating: -55°C to +150°C Voltage Rating: 600V DESCRIPTION: Stranded, Tin Plated copper. Extruded Ethylene Tetrafluoroethylene Copolymer (ETFE)

View Complete Details

polyolefin

  • Temperature -35°C to +125°C

UL 3173, SIS, CSA CL1251, 600V, 125C UL 3173 UL SIS CSA CL 1251 3173 CHARACTERISTICS: Temperature Rating: UL 3173: -35°C to +125°C SIS: -35°C to +90°C Voltage Rating: 600V DESCRIPTION: Stranded Tinned Copper, Color Coded Cross Linked Polyethylene Insulation Click Here To Download The Spec Sheet

View Complete Details

Rubber Test Lead

  • Temperature -30°C to +90°C

Rubber Test Wire | 90C High Voltage Hookup Wire | Insulation TEST LEAD WIRE CHARACTERISTICS: Temperature Rating: -30°C to +90°C Voltage Rating: SEE TABLE DESCRIPTION: Stranded Tinned Copper, Color coded rubber insulation.

View Complete Details

Silicone Rubber Insulated

  • Temperature -40°C to +150°C

UL3239, 15KV-40KV, 150C | High Voltage Wire | Silicone Rubber Insulated UL 3239 Silicone Rubber CHARACTERISTICS: Temperature Rating: -40°C to +150°C Voltage Rating: 15KV Through 40KV Passes UL VW-1 Flame Test DESCRIPTION: Stranded Tinned Copper, Color Coded Silicone Rubber Insulation

View Complete Details

Individually Aluminum Polyester Shield

  • VOLTAGE 300V

MULTIPAIR INSULATED 75°C - POLYPROPYLENE DESCRIPTION SPECIFICATIONS: Each Conductor is Stranded (730) Tinned Copper Polypropylene Insulation, Twisted into Pairs (Black with Red and Green with White). Each Pair Aluminum Polyester Shielded with Stranded Tinned Copper Common Drain Wire, Overall Gray PVC Jacket. UL Listed, NEC Type CM, 75°C CSA Certified PCC FT-4 Suggested working voltage - 300V

View Complete Details

Shielded RIBBON CABLE

  • Temperature 105°C

Shielded And Jacketed SHIELDED & JACKETED RIBBON CABLE (FLAT CABLE) CHARACTERISTICS: APPLICATION: Temperature Rating: 105°C Voltage Rating: 150V Capacitance: 20 pFft. nom.* Propogation Delay: 1.45 nsft. - .10 ns rise time pulse @ 1 mhz* Impedance: 70 ohms nom. Crosstalk: 5.5% near end; 1.6% far end; 10 ft. sample @ 3.5 ns rise time pulse 2.0% near end; .50% far end; 10 ft. sample @ 7.0ns rise time pulse Weico's shielded and jacketed flat cable is designed for use in frequency applications where RF protection is mandated. This general purpose shielded cable minimizes electrical interference and cross talk in such applications. This series uses Weico's gray flat cable and an aluminumpolyester shield. The shielding is folded to provide excellent metal to metal contact and utilizes two drain wires to facilitate grounding. The jacket is a rugged .030" thick flame retardant 105°C black PVC with excellent abrasion resistance. DESCRIPTION: 28 AWG (736) stranded tinned copper conductor Nominal Insulation Thickness: 010" PVC Conductors on .050" centers Gray PVC with red stripe on leading edge Overall AluminumPolyester shield with two stranded tinned copper drain wires - 28 AWG (736) Black PVC Jacket - Thickness: .030" Minimum UL Style 2912 Passes UL VW-1 flame test

View Complete Details

Welding Cable

  • Temperature -30°C to +90°C

WELDING CABLE WELDING CABLE NEOPRENE DESCRIPTION Stranded Bare Copper Conductor. Black Neoprene Jacket Temperature Range: -30°C to +90°C

View Complete Details

Tell Us What are you looking for? Will call you back

Contact Us

  • Edgewood, NY 11717 map, United States