Weifang Zirong Plastic Extruder Co Ltd

Weifang, United States

Product introduction

The mechanical hand of foam container forming machine could be adjusted to move up and down, front and back. Which is not only using the electronic adjustment control, but also to meet the different needs of molds with various sizes. Besides, the suction cup of mechanical hand could be added or reduced as the real operations to meet the needs of final products.

Whats more, there are several models of foam container forming machines depending on the production quantity, size, etc. As a result, you will have more choice.

Technical Data:

1. Size of laminatingheating roller is 270mm1600mm.

2. LaminatingRoller Pressure is 3-7kg/cm²3. Laminating material is surface treatment by teflon.4. Heating Method is electric heating.5. There is conducting hot oil inside laminating roller, and the conducting effect is very good.6. Temperature of hot roller is 90-130.7. Materlal of down roller is Rubber Coating.8. Size of rubber roller is 270mm*1600mm.9. Rubber hardness is HS-A700.10. Expending roller is 100mm1600mm1 set.11. Winding method is torque motor control.12. Driving method is gear box driven by motor, which is not only direct transmission, easy operation, but also safety and beauty.

Product introduction:

1. Cushioning and packaging material for electrical equipment, potteries, glassware etc.
2. Insulation materials at agriculture and construction purposes.
3. Anti static foam protects static sensitive electronic components.
4. Expansion joint filter, under-roof insulation, wall insulation, duct insulation.
5. Pipe insulation for thermal and acoustic applications

Introductions:

The machine screw and barrel material is 38CrMoAIA. Recycled material is crushed by the crusher, which is equipped on the auto feeding system and enters into the screw automatically with high output. Advanced rotary hydraulic-cut die is adopted for granule cutting, so that the granule looks like virgin material and beautiful. By using dehydration dryer and vibrating sieve, no water will be left in the granule.

This recycling and particle cutting machine is the best in the world now, which adopts traditional advantage and applies the technique of particle cutting used for producing raw material.

Our factory will be your best choice if you want to buy recycling machine, because our machine is always good quality with reasonable price. Welcome to visit our factory and have more information here.

Description of our Egg Tray Machine:

Drum-type pulp moulding machine for egg tray forming primary comes from Europe. And our company fetch in advantage technical boldly in the middle of The 90s. Which gets good commentary from domestic market because of its excellent performance.

On the basis of it, our company develops and exports products to various countries. Especially for South east Asia, Africa and South America. Including countries as Russia, India, Bangladesh, India, Thailand, Vietnam, Kenya, Algeria, South Africa, Chile, etc. It has got good comments from customers and confirmation of society since we launches into market.

It has higher output and better dehydration than reciprocating forming machine than most of our competitor. Now the produce cycle is 6-7 times longer than reciprocating, and containing water less 20%-30%.

Product introduction

The mechanical hand of foam container forming machine could be adjusted to move up and down, front and back. Which is not only using the electronic adjustment control, but also to meet the different needs of molds with various sizes. Besides, the suction cup of mechanical hand could be added or reduced as the real operations to meet the needs of final products.

Whats more, there are several models of foam container forming machines depending on the production quantity, size, etc. As a result, you will have more choice.

Product introduction

The mechanical hand of foam container forming machine could be adjusted to move up and down, front and back. Which is not only using the electronic adjustment control, but also to meet the different needs of molds with various sizes. Besides, the suction cup of mechanical hand could be added or reduced as the real operations to meet the needs of final products.

Whats more, there are several models of foam container forming machines depending on the production quantity, size, etc. As a result, you will have more choice.

Product introduction

The mechanical hand of foam container forming machine could be adjusted to move up and down, front and back. Which is not only using the electronic adjustment control, but also to meet the different needs of molds with various sizes. Besides, the suction cup of mechanical hand could be added or reduced as the real operations to meet the needs of final products.

Whats more, there are several models of foam container forming machines depending on the production quantity, size, etc. As a result, you will have more choice.

Introductions:

The machine screw and barrel material is 38CrMoAIA. Recycled material is crushed by the crusher, which is equipped on the auto feeding system and enters into the screw automatically with high output. Advanced rotary hydraulic-cut die is adopted for granule cutting, so that the granule looks like virgin material and beautiful. By using dehydration dryer and vibrating sieve, no water will be left in the granule.

This recycling and particle cutting machine is the best in the world now, which adopts traditional advantage and applies the technique of particle cutting used for producing raw material.

Our factory will be your best choice if you want to buy recycling machine, because our machine is always good quality with reasonable price. Welcome to visit our factory and have more information here.

Technical data sheet

Product introduction:

1. Cushioning and packaging material for electrical equipment, potteries, glassware etc.
2. Insulation materials at agriculture and construction purposes.
3. Anti static foam protects static sensitive electronic components.
4. Expansion joint filter, under-roof insulation, wall insulation, duct insulation.
5. Pipe insulation for thermal and acoustic applications

Product introduction:

1. Cushioning and packaging material for electrical equipment, potteries, glassware etc.
2. Insulation materials at agriculture and construction purposes.
3. Anti static foam protects static sensitive electronic components.
4. Expansion joint filter, under-roof insulation, wall insulation, duct insulation.
5. Pipe insulation for thermal and acoustic applications

Description of our Egg Tray Machine:

Drum-type pulp moulding machine for egg tray forming primary comes from Europe. And our company fetch in advantage technical boldly in the middle of The 90s. Which gets good commentary from domestic market because of its excellent performance.

On the basis of it, our company develops and exports products to various countries. Especially for South east Asia, Africa and South America. Including countries as Russia, India, Bangladesh, India, Thailand, Vietnam, Kenya, Algeria, South Africa, Chile, etc. It has got good comments from customers and confirmation of society since we launches into market.

It has higher output and better dehydration than reciprocating forming machine than most of our competitor. Now the produce cycle is 6-7 times longer than reciprocating, and containing water less 20%-30%.

Product introduction

The mechanical hand of foam container forming machine could be adjusted to move up and down, front and back. Which is not only using the electronic adjustment control, but also to meet the different needs of molds with various sizes. Besides, the suction cup of mechanical hand could be added or reduced as the real operations to meet the needs of final products.

Whats more, there are several models of foam container forming machines depending on the production quantity, size, etc. As a result, you will have more choice.

Description of our Egg Tray Machine:

Drum-type pulp moulding machine for egg tray forming primary comes from Europe. And our company fetch in advantage technical boldly in the middle of The 90s. Which gets good commentary from domestic market because of its excellent performance.

On the basis of it, our company develops and exports products to various countries. Especially for South east Asia, Africa and South America. Including countries as Russia, India, Bangladesh, India, Thailand, Vietnam, Kenya, Algeria, South Africa, Chile, etc. It has got good comments from customers and confirmation of society since we launches into market.

It has higher output and better dehydration than reciprocating forming machine than most of our competitor. Now the produce cycle is 6-7 times longer than reciprocating, and containing water less 20%-30%.

Product introduction

The mechanical hand of foam container forming machine could be adjusted to move up and down, front and back. Which is not only using the electronic adjustment control, but also to meet the different needs of molds with various sizes. Besides, the suction cup of mechanical hand could be added or reduced as the real operations to meet the needs of final products.

Whats more, there are several models of foam container forming machines depending on the production quantity, size, etc. As a result, you will have more choice.

Description of machine

This machine applies to plastic material once-through form the net and continuous automatic product. And it can produce different materials and size such as a filter of top-grade appliance, the package of breeding at sea, wine, fruit, vegetable and so on.

Technical data sheet: