Electric Sander

Shanks are 38"; 50 grit sanding sleeve included. For use on drill press. USA.

Using the same idea as a flush trim router bit, the ROBO-SANDER bottom mounted phenolic bearing follows templates to sand work pieces into perfect duplicates of your pattern:

The guide runs on an oilite bronze bearing for long life and smooth operation.
It can be used to shape parts which are too thick to attempt with a router.
Unlike shapes cut with a router bit, there won't be tear outs or burns to sand, even with highly figured woods.
Includes 50 grit sanding sleeve; replacement sleeves can be ordered separately.
38" shanks.
For use on drill press.

The compact JET 10-20 Plus Benchtop Drum Sander is a steady performer with adjustable downward pressure to minimize snipe:

1HP, 115V, 15A, 1PH TEFC motor.
1, 700 RPM drum speed (5" dia. x 10" drum) - 0-12 FPM variable feed rate; 116" per turn hand wheel height adjustment.
20" maximum width (two passes), 3" maximum thickness, 2-14" minimum length, 132" minimum thickness.
One 80 grit abrasive strip, one 100 grit abrasive conveyor belt, TufTool for wrapping abrasives onto sanding drums, 4" dust port and instructions included.
Net weight 74 lbs.; shipping weight 80 lbs.
Five year manufacturer's warranty.
Imported.

A&H Abrasives heavy duty, resin bonded, open coat cloth strip abrasive rolls are pre-cut and ready to wrap. No measuring or cutting required:
Fits Jet 22-44 oscillating machines (3 per box)
Premium Aluminum Oxide grain delivers sharp and durable performance.
Resin bond anchors the abrasive to the backing for longer belt life.
Y-weight poly-cotton cloth backing is tear resistant and dissipates heat for cooler sanding.
The best belts for general woodworking.
Made in Wyoming, USA with components from Korea and USA.

The DELTA X5 Model 31-255X 18" x 36" Drum Sander has a 4" dia. port to handle fine dust plus a sturdy welded stand and cast iron table:

120V, 1-12HP, 1PH motor and 130HP, 90V DC permanent magnet motor.
2, 210 and 3, 300 SFM drum speeds - 1-12 FM conveyor speed.
Includes five 80 grit sanding wraps, four 120 grit sanding wraps and instructions.
46"H x 24-12"D x 28-12"W.
Net weight 190 lbs.; 215 lbs. shipping weight.
Imported.

With the JET 16-32 Plus Drum Sander (shown with optional infeedoutfeed tables and casters) you get a steady performer with adjustable downward pressure to minimize snipe:

1-12HP, 110VAC, 20A, 1PH TEFC motor.
1, 725 RPM drum speed (5" dia. x 16" drum) - 0-10 FPM feed rate; 116" per turn hand wheel height adjustment.
32" maximum width (two passes), 3" maximum thickness, 2-14" minimum length, 132" minimum thickness.
Comes with steel stand with storage shelf, one 80 grit abrasive strip, one 100 grit abrasive belt, TufTool for wrapping abrasives onto sanding drums, one box of Ready To Wrap abrasives, 4" dust port and instructions.
Net weighs 145 lbs.; 165 lbs. shipping weight.
Five year manufacturer's warranty.
Imported.

The NEW Jet 22-44 Plus Oscillating Drum Sander is a milestone machine in every sense of the word. Adding an oscillation drum to their sander redefined the standard for single drum machines. You will get better results and longer sandpaper life and a surface that will take a finish better because it is not burned or burnished.

Oscillating drum reduces heat build-up and paper loading.
Sand-Smart adjusts conveyor feed rate according to load.
Conveyor belt TRACKERS reduce need for belt adjustments.
Precision flattened reinforced steel conveyor bed.
DC conveyor VS feed motor provides 43 in lbs. torque.
Patented Take-Up fasteners make sandpaper attachment easy.
1-34 HP TEFC continuous duty motor 120230V.
5 year manufacturer's warranty. Imported.