Worldwide Commodities, LLC

Timonium, United States

FOB : Buyer can issue a letter of credit (then COD on all shipments and deliveries) for the total order, or post a 25% advance cash deposit of order and balance COD.

CIF : Buyer and Seller will negotiate CIF terms according to international standards.

FOB : Buyer can issue a letter of credit (then COD on all shipments and deliveries) for the total order, or post a 25% advance cash deposit of order and balance COD.

CIF : Buyer and Seller will negotiate CIF terms according to international standards.

FOB : Buyer can issue a letter of credit (then COD on all shipments and deliveries) for the total order, or post a 25% advance cash deposit of order and balance COD.

CIF : Buyer and Seller will negotiate CIF terms according to international standards.

FOB : Buyer can issue a letter of credit (then COD on all shipments and deliveries) for the total order, or post a 25% advance cash deposit of order and balance COD.

CIF : Buyer and Seller will negotiate CIF terms according to international standards.

1860 face masks from 3m are one of the best quality products made in the usa. We can supply 3m products at very cheap and competetitive prices. These products are directly from 3m usa.

FOB : Buyer can issue a letter of credit (then COD on all shipments and deliveries) for the total order, or post a 25% advance cash deposit of order and balance COD.

CIF : Buyer and Seller will negotiate CIF terms according to international standards.

Based on this comparison, it is reasonable to consider China KN95, AS/NZ P2, Korea 1st Class, and Japan DS FFRs as "equivalent" to US NIOSH N95 and European FFP2 respirators. for filtering non-oil-based particles such as those resulting from wildfires, PM 2.5 air pollution, volcanic eruptions, or bioaerosols (e.g. viruses). However, prior to selecting a respirator. users should consult their local respiratory protection regulations and requirements or check with their local public health authorities for selection guidance.

The 1860 and 1860S healthcare respirators are designed to help provide respiratory protection for the wearer against certain airborne particles. They meet CDC guidelines for Mycobacterium tuberculosis exposure control. As disposable particulate respirators. they are intended to reduce wearer exposure to certain airborne particles including those generated by electrocautery. laser surgery. and other powered medical instruments. As surgical masks, they are designed to be fluid resistant to splash and spatter of blood and other infectious materials. 

The 1860 and 1860S particulate respirators are personal protective equipment (PPE) that are primarily intended to protect the health care workers by reducing exposure to harmful airborne particles which are small enough to be inhaled — typically particles less than 100 microns in size. These include airborne particles that may contain biological material e.g. Bacillus a nthracis. Mycobacterium tuberculosis. mould and the virusthat causes Severe Acute Respiratory Syndrome (SARS). and Influenza. 

Features :

• NIOSH approved N95 rating 
• FDA cleared for use as a surgical mask 
• Fluid Resistance 80 mmHg 
• Flammability Rating Class I 
• Adjustable nose clip 
• Braided and stapled headbands 
• Particulate Respirator and Surgical Mask 

Materials 

The following materials are used in the production of 1860. 1860S respirators : 

• Straps : Braided Polyisoprene 
• Staples : Steel 
• Nose Clip : Aluminium 
• Nose Foam : Polyurethane 
• Filter : Polypropylene / Polyester 
• Shell : Polypropylene 
• Coverweb : Polypropylene 

Use For 

• Intended to be worn by operating room personnel during surgical procedures to help protect both the surgical patient and the operating room personnel from transfer of microorganisms. body fluids, and particulate material. 
• Always follow User Instructions and use in manners as indicated 

Do Not Use for 

• DO NOT use in industrial settings 
• DO NOT use for gases or vapours (i.e. anesthetic gases such as isoflurane or vapours from sterilants such as glutaraldehyde.) 
• DO NOT use in any manner not indicated in the User Instructions 

Approvals and Standards 

• NIOSH approved N95 respirator 
• Meets NIOSH 42 CFR 84 N95 requirements for a minimum 95% filtration efficiency against solid and liquid aerosols that do not contain oil. 
• NIOSH approval number: TC-84A-0006 
• FDA cleared for use as a surgical mask 
• Health Canada Class I medical device 
• Bacterial Filtration Efficiency F2101>99% BFE 
• OSHA Assigned Protection Factor (APF)10 
• Australia TGA approved 

Fitting Instructions 

Must be followed each time the respirator is worn. Before fitting device, ensure hands are clean. 

See Figure 1 below. 

All respirator components should be inspected for damage prior to each use. 

• Cup respirator in one hand with nosepiece at fingertips. allow headbands to hang freely below hand. 
• Hold respirator under chin. with nosepiece up. 
• Locate the upper strap across the crown of the head and the lower strap belowthe ears. 
• Straps must not be twisted. 
• Using both hands. mould noseclip to the shape of the nose to ensure a close fit and good seal. Pinching the noseclip using only one hand may resuht in less effective respirator performance. 
• The seal of the respirator on the face should be fit-checked before entering the workplace. 

Warnings and Use Limitations 

Always sure that the complete product is : 

• Suitable for the application; 
• Fitted correctly;
• Worn during all periods of exposure; 
• Replaced when necessary.

• It is recommended that fit testing be conducted before assigning a respirator to an individual. If you cannot achieve a proper fit then do not enter contaminated area. See your supervisor.
• Inspect respirator before each use to ensure it is in good working condition. Examine all the respirator parts for signs of damage including the two straps, noseclip, nose foam and staples. The respirator should be disposed of immediately upon observation of damaged or missing parts. The respirator should be disposed of immediately upon observation of damaged or missing parts. 
• Leave the contaminated area immediately and contact supervisor if dizziness, irritation or other distress occurs. 
• Dispose of used product in accordance with applicable regulations. 
• All respirators should be used in accordance with local regulations. 
• Do not alter, repair, wash, and abuse or misuse the respirator. 
• Do not use with beards or other facial hair or conditions that prevent a good seal between the face and the sealing edge of the respirator. 
• The respirator can help protect the wearer's lungs against certain 
• The respirator can help protect the wearer's lungs again. certain airborne contaminants: however, it will not prevent entry through other routes such as the skin or eyes, which would require additional personal protective equipment (PPE). 
• The respirator designed for occupational/professional use by adults who are properly trained in it's use and limitations. The respirator is not designed to be used by children. 
• Individuals with a compromised respiratory sy.em. such as asthma or emphyserna. should consult a physician and complete a medical evaluation prior to use. 
• Maximum Operating Temperature: +50 degrees Celsius. 
• The filtration efficiency of the respirator may decrease in the presence of oily mists. 

Storage and Transportation 

Shelf life of the unopened product is five (5) years frorn date of manufacture when stored within temperature range of -20°C to +30°C and at less than 80% relative humidity. End of shelf life date is marked on the product packaging. Before initial use. always check that the product is within the stated shelf life. When storing or transporting this product use original packaging provided. 

FOB : Buyer can issue a letter of credit (then COD on all shipments and deliveries) for the total order, or post a 25% advance cash deposit of order and balance COD.

CIF : Buyer and Seller will negotiate CIF terms according to international standards.