Xipeng Technology Co LTD

Chennai, United States

T551 lubricant Metal Deactivator additive

Benzotriazole Derivative

T551 lubricant Metal Deactivator Description

T551 is a light yellow transparent liquid. It has a prominent synergistic effect on inhibiting the catalytic effect of metal ions on oil oxidation, improving the oxidation resistance of oil products, and prolonging the service life of oil products. It can form an inert film on the metal surface or form a chelate with metal ions to prevent Oxidation of metal has the catalytic acceleration effect of inhibiting the oxidation reaction of the metal, and exhibits an excellent synergistic effect with BHT in an appropriate amount, thereby greatly reducing the amount of BHT. Avoid using this product in combination with ZDDP during use, otherwise precipitation will occur. It is mainly used in industrial lubricating oils such as turbine oil, oil film bearing oil, industrial gear oil, transformer oil and circulating oil. It is a high-performance and high-performance additive.

T551 lubricant Metal Deactivator Product Applications

Mainly used in industrial lubricating oils such as turbine oil, oil film bearing oil, industrial gear oil, transformer oil and circulating oil.

Recommended Dosage: 0.03-0.1%.

T551 lubricant Metal Deactivator Characteristics

ItemTypical Value

AppearanceLight yellow liquid

Density(20), g/cm30.91-1.04

Flash point(COC), 130min

TBN, mgKOH/g210-230

Kinematic Viscosity, 50), mm2/s10-14

Oxidation test (value-added), min90

99.5% Best Price Antioxidant BHT

Antioxidant XPT501

CAS No. 128-37-0

Chemical Name: Butylated Hydroxytoluene

Other Name: T501, BHT, 264

Butylated Hydroxytoluene(BHT) is a white crystalline solid with a faint characteristic odor. It is insoluble in water and in propylene glycol, but is freely soluble in alcohol. It is obtained by alkylation of p-cresol with isobutene or by monobutylation of m, p-cresol mixtures.

APPLICATION

For rubber, plastics antioxidant, gasoline, transformer oil, turbine oil, animal and vegetable oil, food and other antioxidants

Butylated Hydroxytoluene(BHT) Specification:

APPEARANCEwhite crystals or crystalline powder

PURITY99.5%

MELTING POINT69 - 70 C

MOISTURE0.1% max

SULFATE0.002% max

HEAVY METALS0.0004% max

ASH0.0001% max

FREE CRESOL0.02% max.

Specifications

AMINE PHOSPHATE COMPOUNDS

APPLICATIONS

AMINE PHOSPHATE COMPOUNDS/lubricant additive/lubricating oil additive, EP/AW additive equivalent to VANLUBE 672, RC 3740, Irgalube 349.

ashless odorless colorless high load carrying extreme pressure additive

It is pale yellow transparent liquid. It has excellent EP performance,

It is mostly used additive for phosphorus type gear oils, used for blending vehicle & industrial gear oils, hydraulic oil, drilling machine oils and lubricating grease etc.

FEATURES

Excellent EP properties

Good compatiability with other additives

Good oil solubility

RECOMMENDED DOSAGE

0.3-1.0% in lubricating oil.

PACKING AND STORAGE

Packing: 180kgs/drum, 200 L steel drum

PIBSA-1000 Dispersant

Cas No. 68909-40-0

Chemical Name: Polyisobutylene succinic anhydride

Product Description

PIBSA-1000 refers polyisobutylene succinic anhydride that is prepared by high-activity polyisobutylene (Mn=1000) and maleic anhydride, which can be used for the preparation of high-performance emulsifier as well as engine oil additive, resin modifier and raw material in other industries.

Application

MulIt is used to prepare various types of polyisobutylene succinimide and boride ashless dispersant.

Emulsifier for preparing emulsified oil

Processing aids for petrochemical plants

Benefits

High activity polyisobutylene (molecular weight = 1000) is used as raw material;

Hot addition production process;

Chlorine free, environmentally friendly products

Technical Specifications

ItemPIBSA-1000

AppearanceYellow viscous liquid

Kinematic viscosity (100)mm/s5500 600

Saponification value (acid value) / (mg KOH / g)90

Free acid, m%1

Storage&Packing:

Store in a cool and ventilated place to prevent dust and moisture from entering, and seal it in time after use.

170kg/iron drum

Barium Alkylbenzene Sulfonate (T701)

Property:

Barium petroleum sulfonate T701 is a corrosion inhibitor widely used in China at present. T701 has good oil solubility.readily adhered to metal surfaces, and forms a protective fim, preventing metal from corrosion and rusting. It has excellent anti-rust property for ferrous metal and non-ferrous metal.

Generally, the addition amount is 1-10% according to different use conditions.

Specification:

Typical PropertiesSpecificationMethod

Refined fluid T701

Appearancechocolate brown, semi-transparent fluid

Barium Sulfonate, % 45.0

Average Molecular Weight 9001200

Volatiles, % 5

Mineral oil content % 55

chloride contentNone

Sulfate Radical contentNone

Moisture, %0.5

PH value78

Machinery impurity, %None

Packing: fluid 200kg/drum; solid 25kg/drum or carton, 200kg/drum

Shelf life: two years

99.5% Best Price Antioxidant BHT

Antioxidant XPT501

CAS No. 128-37-0

Chemical Name: Butylated Hydroxytoluene

Other Name: T501, BHT, 264

Butylated Hydroxytoluene(BHT) is a white crystalline solid with a faint characteristic odor. It is insoluble in water and in propylene glycol, but is freely soluble in alcohol. It is obtained by alkylation of p-cresol with isobutene or by monobutylation of m, p-cresol mixtures.

APPLICATION

For rubber, plastics antioxidant, adhesive, PP, PE, neoprene, gasoline, transformer oil, turbine oil, animal and vegetable oil, food and other antioxidants

Butylated Hydroxytoluene(BHT) Specification:

APPEARANCEwhite crystals or crystalline powder

PURITY99.5%

MELTING POINT69 - 70 C

MOISTURE0.1% max

SULFATE0.002% max

HEAVY METALS0.0004% max

ASH0.0001% max

FREE CRESOL0.02% max.

dga (diethylene glycol amine)

2- 2-aminoethoxy ethanol diglycolamine dga cas: 929-06-6

introduction of diethylene glycol amine dga:

chemical name: 2-(2-aminoethoxy) ethanol

cas: 929-06-6 molecular formula: h2n-ch2ch2och2ch2oh molecular weight: 105.14

technical specifications:

appearance: colorless transparent liquid

odor: slightly ammonia

content%: 98

moisture max: 0.5%

validity: 2 years

diethylenediol amine dga is a colorless liquid, slightly sticky and slightly aminous. It can be dispersed in water, alcohols and aromatic olefins, but it is poorly dispersed in aliphatic olefins and ethers.

chemicaname: poly[oxyethylene(dimethylimino) ethylene(dimethylimino) ethylene dichloride]

other name: polyquaternary compound

m.f. : (c10h24cl2n2o)n

cas no. : 31512-74-0; 31075-24-8

appearance: amber liquid

content: 60%min

ph 57

application

it is a cationic polymeric algaecide, which can restrain kinds of algae in kinds of industrial cooling water system;

it can also control the growth of algae in swimming pools, holding ponds, reservoirs and the tank of industrial fresh water systems.

it can be used in acidic, alkaline and hard water. it is non foaming biocide and safe at use concentrations.

polyquaternium-42 as swimming pool chemicals

wscp polyquaternium-42 60% algaecide

polixetonium chloride

busan 77 emulsion breaker in metalworking fluid -- cas no. 31512-74-0 / 31075-24-8

metalworking fluid preservative busan77 biocide and algicide cutting fluid 31512-74-0

advantages:non-foaming, non-toxic, non-irritative, non-oxidative, friendly use, good stability

excellent effect to remove and control algae

pool chemicals metal working fluid microorganism

us epa registration

epa biocide algaecide wscp cationic polyquaternium-42 eco friendly 31512-74-0

xp 126-60%

algae control in swimming pools, spa, sight of water, hot spring

algicide

cas no. :31075-24-8/31512-74-0

cationic polymeric non foaming algaecide

algaecide 10%-60%

shelf life : two years

chemicaname: poly[oxyethylene(dimethylimino) ethylene(dimethylimino) ethylene dichloride]

other name: polyquaternary compound

m.f. : (c10h24cl2n2o)n

cas no. : 31512-74-0; 31075-24-8

appearance: amber liquid

content: 60%min

ph 57

polyquaternium-42 as swimming pool chemicals

wscp polyquaternium-42 60% algaecide

polixetonium chloride

application

it is a cationic polymeric algaecide, which can restrain kinds of algae in kinds of industrial cooling water system;

it can also control the growth of algae in swimming pools, holding ponds, reservoirs and the tank of industrial fresh water systems.

it can be used in acidic, alkaline and hard water. It is non foaming biocide and safe at use concentrations.

Item No. XP 50 series

Chemical Name: 2, 4, 6-Tri-(6-aminocaproic acid)-1, 3, 5-triazine

CAS No. 80584-91-4

XP 50 is an excellent green water-soluble corrosion inhibitor for iron material, mainly used in metalworking fluid, circulating water treatment, engine coolant etc. It dosen't contain nitrite with extremely low foam, and well known as Irgacaor L190 in global market.

Xipeng Technology offers three types: XP 50, XP65 and XP85.

TBN400 Petroleum Lubricant Additives Synthetic Calcium Sulfonate

With heavy alkyl benzene sulfonic acid as a main raw material, super high-based synthetic calcium sulfonate is prepared by neutralization and super high alkalization reaction. The product has excellent alkaline storage property, good oil solubility and strong acid neutralization capability, and it can immediately neutralize organic aid and inorganic aid in oil; meanwhile it also has excellent high-temperature detergency and thermal stability. It is a preferred addictive for preparing over-based marine cylinder oil.

XPT5012Anti-Wear Hydraulic Oil Package lube oil additive

Product Introduction

XPT5012Anti-Wear Hydraulic Oil Package (Zn) is formulated with a variety of additives such as superior Anti wear-Agent, High-Temp Antioxidant and Antiseptic Agent. The oil prepared by using the compound has good abrasion resistance, anti-oxidation, good anti-emulsification property and air releasing property and the hydraulic oil life is obviously prolonged.

Product Application

This product is suitable for deployment of a variety of viscosity GB grade anti-wear hydraulic oil, all kinds of indexes can meet the GB standards.

XPT6170 SMGasoline Engine Oil Package Lubricant Additive

XPT6170is formulated with a variety of additives such as good quality detergent, dispersant andanti-oxidation, etc.Ithas excellent detergency and dispersancy and oxidation stability, can effectively inhibit oil oxidationdeterioration and sediment, prevent the engine wear.TheSAE 5W/30 gasoline engine oilwhat is blended with this product has passedthe program IIIG, IIIGA, IVA, VG, VIII engine bench testandcan meet the performance requirements of API SMgasoline engine oil.

We are professional supplier of engine oil pacakge: Diesel Engine oil pacakge, gasoline engine oil pacakge, marine oil pacakge, CNG engine oil pacakage, motorcycle oil package for kinds of APT level. Please tell us your requirements, we will advise the suitable products for you. OEM orders are wellcomed.

XPT6066is a multi-purpose diesel engine oil package blended by various kinds of high quality detergent, dispersant, ZDDP, high-temp antioxidant, etc. The diesel engine oil of CH-4, CI-4 API grades that made by this package has a good lubricity, detergency, dispersity, anti-oxidation and anti-corrosion ability, and effectively protect the engine.

Introduction to Marine 4030 Medium-speed Trunk Piston Engine Oil Package For IMO2020

XPT6325marine cylinder oil package use the best quality additives and it is developed according to advanced marine oil technology formula from the domestic and foreign. The product not only has excellent acid neutralization capacity anddispersity, wear resistance and oxidation stability, but also have excellent demulsibility, detergency, anti foam, anti emulsifying properties. Can meet the requirements for the special condition ofmarinecylinder oil. Practice has proved that the protective effectformarinecylinder isvery notableand lasting.

Technical Index

Recommended Dosage of Marine 4030 Medium-speed Trunk Piston Engine Oil Package For IMO2020

MMA Trazine

Chemical Name: 1, 3, 5-Trimethylhexahydro-s-triazine35-45%

Other Name: MMA Triazine,

CAS No.: 108-74-7

Purity 35%

MF C6H15N3 EINECS No. 203-612-8

Specification

Appearance colorless to light yellow transparent liquid

mass fraction% 35%

Refractive Index 20 1.360 1.460

Density (20, g/ml) 1.0 1.03

PH Value 9.5 11.5

Application

Pesticides, pharmaceutical intermediates, sterilization, slow release, and desulfurization in the petroleum industry.

h2s scavenger (triazine based)

application : removing corrosive and poisinous from liquid and gas.

remove h2s gas

appearance clear liquid

color colorless to yellow liquid

specific gravity? at 25 c: 1.100 1.200

active content %: 78 % min

solubility: soluble in water and oil

ph: 9.00- 11.00

we xipeng technology is a professional manufacturer of h2s scavenger.h2s scavenger is the superior product of our company. welcome to contact us for samples & informations.

h2s scavenger (triazine based)

mea triazine, h2s scavenger

Monoethanolamine benzoate MEA triazine 99% min used as Anti-Oxidizer

Monoethanolamine benzoate

Product Description:

CAS: 4337-66-0

Chemical Name: Monoethanolamine benzoate

Other Names: MEA benzoate, Benzoic acid

Molecular formula:C9H13NO3

Molecular weight. 183.2044

Properties:

1. Monoethanolamine benzoate appears white powder without or with slight ammonia odor and its melting point is 140-143C

2. Soluble in water, ethanol and glycerol

Use:

1. Preservative in cosmtics.

2. Anti-Oxidizer to prevent boat deck and steel bar from being rusted

3. To be added into construction materials to improve the durability and corrosion resistance

4. Used in metal cutting and cooling realm.

Quality index:

Purity99.0%

Loss on drying1. 5%

XP mix II Corrosion Inhibitor

----------Dodecanedioic Acid blend

Blend of C10 through C12 dibasic acids.

Formula

Sebacic Acid 111-20-6

Undecanedioic Acid 1852-04-6

Dodecanedioic Acid 693-23-2

Application

Metal cutting fluids Cooling fluids Lubricants

General Information

Appearance White/Off white flake

Total dibasic acids (wt %) 98.0

C10 through C12 dibasic acid (wt %) 95.0

Water (wt %)

Tricarboxylic Acid Corrosion Inhibitor Cas 80584-91-4 for cutting fluidXP50 CORROSION INHIBITOR

Typical chemical and physical properties XP 50, an organic polycarboxylic acid, is a water-soluble corrosion inhibitor which can be classified as an amphoterics organic surfactant.

It is an inhibitor for all types of water based lubricants and functional fluids.

MF: C21H36N6O6 CAS No. 80584-91-4 2, 4, 6-Tri-(6-aminocaproic acid)-1, 3, 5-triazine

Appearance white powder or granules

Average composition 50 % active content, 50 % water

Molecular weight 468.6

the chlorine content (ppm) 200

Recommend treat level 0.2-1.5%a

(1) If the PH is adjusted with triethanolamine (TEA) or another base to pH > 8 then the solubility in water increases to > 5.0%

(2) TEA > 99% pure is recommended to meet requirement of German TRGS 611.

Applications and typical treat levels

All types of water based lubricant and functional fluids:

- metal working fluids (semi-synthetic and synthetic)

- high water based hydraulic fluids (HFC) engine coolants

- engine and other cooling systems

Benefits

- Does not form resinous films or gums on metals

- Offers an extremely low foaming tendency and an excellent air release

- Good biodegradability

- Compatible with hard water

- XP 50 may be used for corrosion inhibition of multi-metal systems.

- This inhibitory effect can be improved by a combination with XP 42 a water-soluble metal deactivator

- No tendency to form nitrosamines

Package & Shelf life: 25kg/bag, 750kg/pallet , 1 year (under airtight, dry and cool conditions

Item No. XP 50 series

Chemical Name: 2, 4, 6-Tri-(6-aminocaproic acid)-1, 3, 5-triazine

CAS No. 80584-91-4

XP 50 is an excellent green water-soluble corrosion inhibitor for iron material, mainly used in metalworking fluid, circulating water treatment, engine coolant etc. It dosen't contain nitrite with extremely low foam, and well known as Irgacaor L190 in global market.

Xipeng Technology offers three types: XP 50, XP65 and XP85.

If you are intrested in this product, please contact us by follow ways:

MWFs Tricarboxylic Acid Corrosion Inhibitor for Ferrous Metal