Post Buy Requirement
AC
United States
Add Review

Sheet Metal Electrical Enclosure

High Voltage Enclosures

  • Max Voltage (kV) 3.3
  • Max Current (A) 1250
  • Max Conductor Size (mm2) 1000
  • Max Fault Rating (kA) N/A
Abtech are market leaders in the design and manufacture of high voltage and high current connection solutions for use in hazardous areas.

Through constantly listening to our customers needs, we now a comprehensive range covering voltages up to 45kV. Different sizes and options result in more than 50 combinations to choose from and new variations continually being added. The following is a summary.

All Abtech high voltage enclosures are manufactured in 316 grade stainless steel and are rated IP66 as standard. The entire range also offers flexibility in terms of both connection options and mounting arrangements.

Whatever your requirement for high voltage connections in hazardous areas may be, we have the portfolio and expertise to help
View Complete Details

SSD Ex D Exd Enclosures

  • Width 100
  • Height 130
  • Depth 50
The SSD Ex d range of enclosures are manufactured from either 316 stainless steel or mild steel and provide significant levels of environmental protection.
The range utilises the same flexible design approach employed on the famous Abtech SX range of Ex e enclosures. The sizes shown above are the most popular sizes, however, Abtech are also able to supply any size of enclosure as long as each dimension falls within the range of smallest to largest size, shown below. This affords the range a unique flexibility, allowing customers the ability to employ cost-effective, custom sized enclosures in their application.
View Complete Details

Stainless Steel Enclosures

  • Width 114
  • Height 114
  • Depth 51
The SX range comprises 14 sizes of enclosure manufactured in either mild steel or stainless steel. Depending on the enclosure size they are available in standard depths of 140, 200 or 300mm and can be fitted with removable gland plates on any or all of the four sides.
The SX range was specifically designed to meet the rigours of the offshore environment. With a high level of ingress protection (IP6667), the SX has also passed the ShellERA deluge test which was devised to adequately test enclosures and electrical equipment which is routinely subjected to ships decks conditions or fire deluge systems.
IP68 enclosures are also available for depths up to 120ft 35m depending on specifc customer requirements.
The stainless steel range (SSX) is manufactured in 316 grade stainless steel to give the maximum environmental protection. The main body is manufactured from 2mm thick sheet and the mounting straps and gland plates from 3mm thick plate. Cable entries can be drilled in the sides or through the gland plates, if fitted, or through the enclosure wall. Entries may also be drilled through the rear face of the enclosure.
Another advantage of the SX range is that it is suitable for fire resistance applications and when fitted with ceramic terminals meets the requirements of IEC 331 (750C for 3 hours) and also BS63871983 (950C for 3 hours).
Designed for simple installation and ease of use, the enclosure door is held to the enclosure by at least 4 captive stainless steel screws. These maintain the correct compression on the gasket. The oversize hinge design enables the screws to control the closing of the door, not the hinge, its only function being to support the door when opened. The hinges allow easy removal of the door with only minimal opening required before removal (less than 10).
The SX range can be constructed to almost any dimension and the certification allows oversize enclosures to be manufactured whilst retaining the next smallest sized enclosures power rating.
Earthing is accomplished by means of an externalinternal earth stud fitted as standard which can be connected to the terminal mounting rail or component mounting plate and optionally earth studs can be fitted to the door and gland plates.
Rail mounted earth terminals or proprietary earth bars can be fitted inside the enclosure.
The SX has a wide ambient emperature range from -70C to 130C and is suitable for use in hazardous areas including: ATEX and IECEx Ex e(Zone 1 & 2), Ex nA (Zone 2), CSA, UL & FM (Class 1, Div 2) and NEMA 4X.
The SX range can be supplied fitted with any component approved terminal to apparatus level or can be supplied empty as component approved for the clients own certification requirements
View Complete Details

GRN Enclosure

The GRN enclosure has been designed as a cost-effective junction box for use in hazardous areas. There are a number of terminal and entry configurations available, resulting in a highly versatile enclosure which is suitable for a wide variety of installations.
The enclosure is manufactured in a UL approved UV stabilised polycarbonate and is available as a pre-assembled terminal box or as an empty enclosure for OEM applications. It can be supplied with the option of a terminal rail, an internal chassis plate or directly mounted terminals for cables up to 4 sq mm.
The GRN8 is a competitive product for lower risk applications in both safe and hazardous areas. It is designed to operate within the ambient temperature range of - 20C to + 40C but for non hazardous application the upper ambient temperature range can be extended to + 90C.
As well as being UV stable, polycarbonate is resistant to a wide variety of chemicals. The use of silicone rubber lid gasket and 316 stainless steel lid fixings ensures that the chemical resistance of the GRN is not compromised. Earthing can be accomplished by various means. The provision of an internalexternal earthground stud is optional or one of the terminals can be dedicated to earthing grounding functions.
Additionally, there is the facility to mount an earth bar inside the box which can be used to terminate and connect as many earthing wires as there are cable entries. This method is useful for the equi-potential bonding of metal cable glands and an additional equi-potential wire can be linked to the internalexternal earth stud to facilitate a positive connection to the plant dirty earthing system. The earth bar can alternatively be used as a clean earth for instrumentation as it can be electrically isolated from the dirty earth.
The GRN is ATEX certified for use in Zone 1 hazardous areas Ex e to BS EN 50019:2000 for Zone 1 and Zone 2 applications, BS EN 50281-1 for Zone 21 and Zone 22 applications and EExnA to BS EN 50021 for Zone 2 applications.
View Complete Details

ZAG Aluminium Enclosures

  • Width 50
  • Height 45
  • Depth 30
The ZAG range comprises 19 sizes of enclosure and are precision die cast in Al Si 12 grade (LM24) aluminium alloy. This is considered to be the most suitable grade of aluminium for maximum corrosion resistance especially in salt laden atmospheres. Additional optional protection methods such as Alochrome, anodising and epoxy polyester painting coupled with the fitment of captive, 316 grade stainless steel, lid retaining screws further enhance the anticorrosion properties of the enclosure. The wall thickness is sufficient to allow tapped entry holes to be machined in the walls or the base of the enclosure.
Due to the enclosures labyrinth seal system, similar to that of the BPG range, whereby the seal is protected from external forces, the ZAG enclosure has excellent ingress protection qualities which mean that the enclosure is tested to and passed IP6667. The mounting holes although contained within the profile of the enclosure sit outside the seal and all external fasteners and fixings are manufactured from 316 grade stainless steel to ensure reliability. External stainless steel mounting feet are offered as an option. The ZAG range has many features which lend itself to a whole host of applications including junction boxes, both industrial and hazardous area, and especially OEM applications, where the excellent machining qualities of aluminium come to the fore. The ZAG range can be machined, drilled, tapped with various thread forms and it readily accepts most paint finishes and colours. The ZAG range is particularly suitable for engraving of instructions and decals and this method provides excellent durability. Silk screen printing is also available. All of this can be achieved even in relatively small batches which make the ZAG range ideal for the small to medium size manufacturers who can achieve a custom enclosure economically. Earthing can be accomplished by various means. Externalinternal stainless steel earth stud which in turn can be connected to the terminal mounting rail or component mounting plate and various rail mounted earth terminals or proprietary earth bars can be fitted inside the enclosure. Due to the fact that aluminium is an excellent conductor, earthing for cable glands is provided through contact with the enclosure wall with no further earthing necessary. When fitted with a standard neoprene gasket the enclosure is suitable for ambient temperatures of -40C to 80C. Alternatively, when fitted with an optional silicone gasket the temperature range is increased to -70C to 130C. RFI screening is easily achieved using ZAG enclosures and the Abtech sales team can give advice on suitable RFI gaskets and finishing techniques which will provide optimum protection. The ZAG enclosures are suitable for use in hazardous areas and can be supplied with a number of certificates. ATEX EEx e to BS EN 50019 (zone 1 & 2) EEx nA to BS EN50021 (zone 2) and NEMA 4X (CSA, UL & FM class 1, div 2). The ZAG range can be supplied fitted with any component approved terminal to apparatus level or can be supplied empty as component approved for the clients own certification requirements.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (A.B. Controls & Technology, Inc.)
  • Humble, TX 77338 map, United States
  • Share us via