Passenger Lift #5146764

All of the controllers are assembled in our UL listed panel shop
These units conform to all applicable ANSI and ASME codes
Motors are equipped with integral brake locks
Units are equipped with double chains
All units have flattened expanded enclosures attached at the factory
Platforms have dual surface guides in all four (4) corners
Call-send-stop buttons mounted at each level
Platforms are equipped with load retention bars on all four (4) sides
Power drive units mounted in the top of each unit, other configurations are available

All models are equipped with a hinged bridge equipped with a pull back chain.
All models have an approach ramp, wheel chock.
All of the electrical controllers are Underwriters Laboratories approved assemblies.
Each unit is washed with phosphoric acid, fully primed and then finished with baked enamel.
All cylinders are machine grade with clear plastic return lines.
All pressure hoses are double wire braid with JIC fittings.
Reservoirs are mild steel.
These units conform to all applicable ANSI codes

All models are equipped with a hinged bridge with a pull back chain.
All of the electrical controllers are Underwriters Laboratories approved assemblies.
Each unit is washed with phosphoric acid, fully primed and then finished with baked enamel.
All cylinders are machine grade with clear plastic return lines & internal mechanical stops.
All pressure hoses are double wire braid with JIC fittings.
Reservoirs are mild steel.
These units conform to all applicable ANSI codes.