Advanced Pressure Systems

United States


  • 20K psi ADAPTERS

    These Stainless Steel Male x Male Adapters allow for connecting Medium Pressure (MP) and NPT female threaded components.

    View Details » Send Enquiry »

  • Adapters

    These Stainless Steel Male x Male Adapters allow for connecting Type M and NPT female threaded components.

    View Details » Send Enquiry »

  • AEROQUIP QUICK DISCONNECT COUPLINGS

    Advanced Pressure Systems designed its Aeroquip™ Quick Disconnect Hose Couplings with all the best features seen in the market. They are made from heat-treated stainless steel for high durability in water blasting service. Sizes available to suit most hoses. All feature easy-grip texturing for ...

    View Details » Send Enquiry »

  • AIR DIVERTER VALVE

    Air Operated Diverter Valves provide much improved operator safety by allowing control of flow and pressure to be carried out remotely. When air is sent to the cylinder, the valve closes and allows the system to build pressure. The valve opens when the air is exhausted, reducing system pressure to ...

    View Details » Send Enquiry »

  • AIR DIVERTER VALVE BASE PLATE

    Air Operated Diverter Valves provide much improved operator safety by allowing control of flow and pressure to be carried out remotely. When air is sent to the cylinder, the valve closes and allows the system to build pressure. The valve opens when the air is exhausted, reducing system pressure to ...

    View Details » Send Enquiry »

  • AIR DIVERTER VALVE W/O BASE PLATE

    Air Operated Diverter Valves provide much improved operator safety by allowing control of flow and pressure to be carried out remotely. When air is sent to the cylinder, the valve closes and allows the system to build pressure. The valve opens when the air is exhausted, reducing system pressure to ...

    View Details » Send Enquiry »

  • AIR DIVERTER VALVE W/O RISER & BASE PLATE

    Air Operated Diverter Valves provide much improved operator safety by allowing control of flow and pressure to be carried out remotely. When air is sent to the cylinder, the valve closes and allows the system to build pressure. The valve opens when the air is exhausted, reducing system pressure to ...

    View Details » Send Enquiry »

  • ARTICULATED FLEX LANCE SAFETY STOP

    This takes the Hand-Held Flex Lance Safety Grip to the next level. This versatile lance stop anti-withdrawal device attaches easily to the tube sheet for safer pipe cleaning operations. It features adaptability to vertical or horizontal applications, and its wide range of expansion accommodates ...

    View Details » Send Enquiry »

  • AUTOCLAVE STYLE STRAIGHT COUPLERS

    20K psi AUTOCLAVE STYLE STRAIGHT COUPLERS These Stainless Steel Autoclave Style Couplers are also available without gland nuts and collars.

    View Details » Send Enquiry »

  • AUTOCLAVE STYLE TEES

    20K psi AUTOCLAVE STYLE TEES Tees are made from stainless steel. Versions without gland nuts and collars also available.

    View Details » Send Enquiry »

  • BUTTON TIP FLEX LANCE NOZZLES

    Button Tip compact stainless steel nozzles come in pressure ratings to match your flex lances. They are ideal for cleaning small diameter tubes with small radius bends. Button Tip Flex Lance Nozzles feature FNPT threads to go with lances with MNPT threads, and all offer many options for precision ...

    View Details » Send Enquiry »

  • CONTROL GUN NOZZLE HOLDERS

    APS makes its quick-change 916" MP (F) Nozzles Holders for control guns to accommodate the TC Drop-In Tips common to shotgun cleaning applications. Simply unscrew the cap and drop in the appropriate nozzle for the job.

    View Details » Send Enquiry »

  • DRY SHUT-OFF AIR DIVERTER VALVE

    Air Operated Diverter Valves provide much improved operator safety by allowing control of flow and pressure to be carried out remotely. When air is sent to the cylinder, the valve closes and allows the system to build pressure. The valve opens when the air is exhausted, reducing system pressure to ...

    View Details » Send Enquiry »

  • DRY SHUT-OFF GUN HANDLE ASSEMBLY

    15K psi DRY SHUT-OFF GUN HANDLE ASSEMBLY Complete Dump Gun Handle Assemblies are available, as well as the individual components.

    View Details » Send Enquiry »

  • DUMP GUN HANDLE ASSEMBLY

    15K psi DUMP GUN HANDLE ASSEMBLY Complete Dump Gun Handle Assemblies are available, as well as the individual components.

    View Details » Send Enquiry »

  • Elbows

    These rugged Wafer Type Fittings are made from stainless steel and are heat treated. They are available in a variety of configurations including Elbows, Crosses and Wyes.

    View Details » Send Enquiry »

  • Elbows

    MP ELBOWS Elbows are made from stainless steel. Versions without gland nuts and collars also available.

    View Details » Send Enquiry »

  • EPLM PINEAPPLE LINE MOLE NOZZLES

    The APS EPLM Pineapple-Type Line Mole Nozzles are made from stainless steel with a special copper coating to prevent galling during installation. EPLM Nozzles have 12" NPT inlets with 116" NPT (F) ports and a choice of port locations. These are used with a variety of line mole inserts. Wrench ...

    View Details » Send Enquiry »

  • FAN TIP MNPT NOZZLES

    APS makes its 15K Tungsten Carbide Fan Tip Nozzles to bring exceptional power to control gun surface cleaning applications. They are available in 15° & 25°, made from hardened stainless steel inserted with tungsten carbide orifice, and feature male NPT threads and wrench flats for easy ...

    View Details » Send Enquiry »

  • FOOT OPERATED DUMP GUN

    Foot operated control valves (foot guns) are designed for smooth, reliable operation. They are easily rebuilt in the field in 30 seconds by unscrewing the dump tube, which removes the used valve assembly. The operator then snaps a new cartridge style valve in to the dump tube adapter and returns ...

    View Details » Send Enquiry »

  • GUN BARREL HARD HITTER MNPT NOZZLES

    APS makes its 15K Gun Barrel Hard Hitter Nozzles to bring exceptional power to control guns. Each is made from heat treated stainless steel and features male NPT threads and wrench flats for easy installation.

    View Details » Send Enquiry »

  • HAND-HELD DOUBLE DUMP GUN

    There is an increasing demand for the extra safety of control guns - which incorporate dual dump ports. Our Double Dump Style Control Guns feature ergonomic advantages and a specially designed front handle. The handle itself is at a 90-degree angle to the barrel, thus conforming to the operator's ...

    View Details » Send Enquiry »

  • HAND-HELD DUMP GUN

    20K psi HAND-HELD DUMP GUN W 916" MP BARREL These guns are the new standard and are built tough for the demands of today's contracting environment.

    View Details » Send Enquiry »

  • HAND-HELD DUMP GUN NPT BARREL

    Advanced Pressure Systems offers the 15,000 psi series of hand-operated control guns, using the industry standard cartridge style dump valve. These guns have been carefully designed to incorporate all the features that are demanded by experienced operators.

    View Details » Send Enquiry »

  • HIGH VOLUME AIR DIVERTER VALVE

    The High Volume Air Operated Dump Valve allows an operator to remotely control pressure in cleaning applications up to 22,000 psi. When air is sent to the cylinder, the valve closes and allows the system to build pressure. The valve opens when the air is exhausted, reducing system pressure to ...

    View Details » Send Enquiry »

  • HIGH VOLUME AIR DIVERTER VALVE W O BASE PLATE

    Air Operated Diverter Valves provide much improved operator safety by allowing control of flow and pressure to be carried out remotely. When air is sent to the cylinder, the valve closes and allows the system to build pressure. The valve opens when the air is exhausted, reducing system pressure to ...

    View Details » Send Enquiry »

  • HIGH VOLUME FOOT OPERATED DUMP GUN

    Foot Operated Control Valves (Foot Guns) are designed for smooth and reliable operation. They are easily serviced in the field with a simple 30 second rebuild. Unscrewing the dump tube and cartridge adapter will extract the worn valve assembly. The operator can then snap in a new valve cartridge ...

    View Details » Send Enquiry »

  • JETSTREAM TYPE PORT FITTINGS

    The Port type connection is often found on pressure regulating valves (bypass valves) and 20K JS style manifolds. Seal assemblies are included in the below part numbers.

    View Details » Send Enquiry »

  • MEG MNPT HARD HITTER NOZZLES

    APS carries 14” Meg Hard Hitter Nozzles to bring exceptional power to control gun surface cleaning and cutting applications. The internal guide vane focuses flow for maximum performance. They are made from hardened stainless steel and feature male NPT threads and wrench flats for easy ...

    View Details » Send Enquiry »

  • METRIC BSPP TO NPT ADAPTERS

    Advanced Pressure Systems offers NPT, Metric, and BSPP fittings for all your connect needs. If what you need is not listed, please call and ask.

    View Details » Send Enquiry »

  • MP X NPT SLIMLINE COUPLINGS

    Slimline Couplings rated for 15K psi are primarily used on rotary lance machines when downgrading from 20K and 40K to 15K applications.

    View Details » Send Enquiry »

  • MP-MALE TO NPT REDUCER BUSHINGS

    Specifically designed for water blasting service, these high quality Reducer Bushings are made from heavy duty stainless steel because of its reliability and durability.

    View Details » Send Enquiry »

  • NPT LARGE ULTRA-POLISHED NOZZLES

    APS offers these special Ultra-Polished Nozzles for use in high flow applications where a straight jet of water is required for large cleaning applications. These are often used with shell-side cleaners but have many other uses.

    View Details » Send Enquiry »

  • NPT LONG HARD HITTER NOZZLES

    The 12" NPT Long Hard Hitter Nozzles offer an elongated orifice that holds a pattern longer than some of the shorter nozzles on the market. Great for hand-held shotgunning as well as mechanical cleaning tools, such as shell-side machines and tower cleaners.

    View Details » Send Enquiry »

  • NPT STAINLESS STEEL LINE MOLE NOZZLE INSERTS

    These Stainless Steel Line Mole Nozzle Inserts are used primarily in Pineapple Line Mole Nozzles. They are available with both drilled jets and also with Tungsten Carbide orifice inserts.

    View Details » Send Enquiry »

  • NPT TUNGSTEN CARBIDE LINE MOLE NOZZLE INSERTS

    These Stainless Steel Line Mole Nozzle Inserts are used primarily in Pineapple Line Mole Nozzles. They are available with both drilled jets and also with Tungsten Carbide orifice inserts.

    View Details » Send Enquiry »

  • Pressure Regulating Valve

    A Pressure Regulating Valve (PRV) is used on both diesel and electric pumping units to divert a portion of the flow to a low pressure outlet. It is really a hand-adjusted needle valve, and it can be used to control pressure when the application requires a flow at the low end of the pumping unit ...

    View Details » Send Enquiry »

  • psi ADAPTERS METRIC

    10-40K psi ADAPTERS METRIC (M) X NPT (M) These Stainless Steel Male x Male Adapters allow for connecting Metric and NPT female threaded components.

    View Details » Send Enquiry »

  • psi ANTI-VIBRATION GLANDS

    A less complex and more economical design than other vibration-resistant connections, the collet gland assembly utilizes the same coned-and-threaded features of the medium pressure connections. It extends the gland nut to provide room for the tapered slotted collet. The design provides a slight ...

    View Details » Send Enquiry »

  • psi APLM PINEAPPLE LINE MOLE NOZZLES

    APLM Pineapple Line Mole Nozzles are made from stainless steel with a special copper coating to prevent galling during installation. 10-15K APLM Pineapple Line Mole Nozzles have 1" NPT inlets with 14" NPT (F) ports and a choice of port locations. These nozzles are used with line mole inserts, and ...

    View Details » Send Enquiry »

  • psi AUTOCLAVE STYLE SINGLE PIECE ADAPTERS

    Stainless Steel Autoclave Adapters are commonly used to connect high pressure polyflex hoses with Type M female swivels to assemblies, such as foot operated dump guns, air diverter valves and hand-held control guns.

    View Details » Send Enquiry »

  • psi BPLM PINEAPPLE LINE MOLE NOZZLES

    The APS BPLM Pineapple-Type Line Mole Nozzles are made from stainless steel with a special copper coating to prevent galling during installation. BPLM Nozzles have 12" NPT or 34" NPT inlets with 14" NPT (F) ports and a choice of port locations. These are used with a variety of line mole inserts. ...

    View Details » Send Enquiry »

  • psi BSPP COUPLINGS

    The Advanced Pressure Systems Couplings rated for 15K psi are primarily used on rotary lance machines when downgrading from 20K and 40K to 15K applications.

    View Details » Send Enquiry »

  • psi BUSHINGS

    Stainless Steel Male x Female Bushings in BSPP x NPT. 15-20K psi BUSHINGS Brand: Advanced Pressure Systems SKU: 20-026-043

    View Details » Send Enquiry »

  • psi CARRIER NOZZLES

    Our Carrier Nozzles are ideal for the Cobra Control Gun, as they are available with 2-5 ports. Inlet ports are 916” HP Cone or Button, and nozzle ports are usually 38”-24.

    View Details » Send Enquiry »

  • psi COLLARS

    psi COLLARS We offer a growing line of quality water jetting fittings for every pressure and application.

    View Details » Send Enquiry »

  • psi CPLM PINEAPPLE LINE MOLE NOZZLES

    The APS CPLM Pineapple-Type Line Mole Nozzles are made from stainless steel with a special copper coating to prevent galling during installation. CPLM Nozzles have 12" NPT inlets with 14" NPT (F) ports and a choice of port locations. These are used with a variety of line mole inserts. Wrench ...

    View Details » Send Enquiry »

  • psi DOUBLE DUMP GUN HANDLE ASSEMBLY

    15K psi DOUBLE DUMP GUN HANDLE ASSEMBLY Complete Dump Gun Handle Assemblies are available, as well as the individual components.

    View Details » Send Enquiry »

  • psi DPLM PINEAPPLE LINE MOLE NOZZLES

    The APS DPLM Pineapple-Type Line Mole Nozzles are made from stainless steel with a special copper coating to prevent galling during installation. DPLM Nozzles have 34" NPT inlets with 18" NPT (F) ports and a choice of port locations. These are used with a variety of line mole inserts. Wrench ...

    View Details » Send Enquiry »

  • psi DRY SHUT-OFF CARTRIDGES

    Our Replacement Dump Style and Dry Shut-Off Cartridges enable hand lances, foot valves and air diverter valves to be quickly and easily rebuilt in the field. Similarly, cartridges for the Flow Divider Valves and Pressure Regulating Valves also enable rapid field replacement and servicing.

    View Details » Send Enquiry »

  • psi DUAL LANCE MANIFOLDS

    We offer Compact Dual Lance Manifold so that you may run two rigid lances from a single control valve correctly.

    View Details » Send Enquiry »

  • psi DUMP CARTRIDGES

    Our Replacement Dump Style and Dry Shut-Off Cartridges enable hand lances, foot valves and air diverter valves to be quickly and easily rebuilt in the field. Similarly, cartridges for the Flow Divider Valves and Pressure Regulating Valves also enable rapid field replacement and servicing.

    View Details » Send Enquiry »

  • psi DUMP GUN HANDLE ASSEMBLY

    This gun handle assembly is used in our 20K Hand-Held Dump Gun, Double Dump Gun and Zero Thrust Gun. All components listed below are included.

    View Details » Send Enquiry »

  • psi EVAPORATOR NOZZLES

    Stainless Steel Evaporator Nozzles are used with rigid or flex lances with MNPT threads. The design permits a range of forward and side drilling patterns, while the backwards facing ridge allows a large number of pulling orifices to more efficiently clean fouled tubing. Wrench flats allow for ...

    View Details » Send Enquiry »

  • psi FLEX LANCE SAFETY GRIPS

    The Flex Lance Safety Grip is designed to minimize the risk on injury to flex lance operators caused by a live nozzle exiting the tube unexpectedly. The comfortably contoured handle makes it easy to hold the safety grip against the tube sheet, allowing retraction of an active nozzle in to a ...

    View Details » Send Enquiry »

  • psi FLOW DIVIDER VALVE

    Flow Divider Valves (FDV) are for applications where two dump style guns are to be operated from one pump. The FDV will maintain full pressure to either gun when the other gun is dumping. When both guns are operating, the flow and pressure will be unaffected. These valves are made with rugged ...

    View Details » Send Enquiry »

  • psi FNPT NOZZLES

    FNPT Nozzles are to be used in rotary applications for the removal of hardened plugs in heat exchanger tubes. FNPT Nozzle NPT threads go with lances with MNPT threads, and the slimline design makes it easy to move through almost any size of tubing. There are also a wide range of options for ...

    View Details » Send Enquiry »

  • psi GLAND NUTS

    Manufactured specifically for water blasting service, these fitting are made from heavy duty stainless steel because of its reliability and durability.

    View Details » Send Enquiry »

  • psi HAND-HELD DOUBLE DUMP GUN

    There is an increasing demand for the extra safety of control guns that incorporate dual dump ports. Advanced Pressure Systems 20K Double Dump Control Guns feature ergonomic advantages and a specially designed front handle. The handle itself is at a 90-degree angle to the barrel, thus conforming ...

    View Details » Send Enquiry »

  • psi HAND-HELD DRY SHUT-OFF GUN

    Advanced Pressure Systems offers the series of hand-operated control guns, using the industry standard cartridge style dump valve. These are our Dry Shut-Off Control Guns and Unloader Valves. Enjoy the same benefits of our renowned Dump Style Control Guns with the added advantage of reduced water ...

    View Details » Send Enquiry »

  • psi HAND-HELD LEVER GUN

    The Lever Style Control Gun provides the same serviceability and safety features as the standard hand gun but in a style that is better suited to certain special applications, including hydro-excavation.

    View Details » Send Enquiry »

  • psi HAND-HELD ZERO THRUST GUN

    Zero Thrust Style Control Guns are designed primarily for underwater use, where the self-canceling forwards and backwards thrusts allow the operator to carry out blasting operations without being propelled away from the intended work area. Zero Thrust Style Control Guns also have application on dry ...

    View Details » Send Enquiry »

  • psi HEAVY DUTY COUPLINGS

    Stainless Steel Heavy Duty Couplings are used for connecting a wide range of hoses. These are robust fittings are capable of withstanding the most demanding working conditions.

    View Details » Send Enquiry »

  • psi HEX HEAD PLUGS

    Manufactured by Advanced Pressure Systems specifically for water blasting service, these fitting are made from stainless steel because of its reliability and durability.

    View Details » Send Enquiry »

  • psi HEX NIPPLES

    In both straight and reducing varieties specifically for water blasting service, these Hex Nipples are made from heavy duty stainless steel because of its reliability and durability.

    View Details » Send Enquiry »

  • psi HIGH PERFORMANCE HEX TYPE SAPPHIRE

    Our High Performance Sapphire Nozzle Inserts are compact inserts made to drop in to the typical nozzle jewel screw common to UHP jetting applications. There are two types of High Performance Sapphire Insert Assemblies:

    View Details » Send Enquiry »

  • psi HIGH PERFORMANCE SLOTTED SAPPHIRE

    Our High Performance Sapphire Nozzle Inserts are compact inserts made to drop in to the typical nozzle jewel screw common to UHP jetting applications. There are two types of High Performance Sapphire Insert Assemblies:

    View Details » Send Enquiry »

  • psi HIGH VOLUME AIR DIVERTER VALVE

    The High Volume Air Operated Dump Valve allows an operator to remotely control pressure in cleaning applications up to 15,000 psi. When air is sent to the cylinder, the valve closes and allows the system to build pressure. The valve opens when the air is exhausted, reducing system pressure to ...

    View Details » Send Enquiry »

  • psi HIGH VOLUME AIR DIVERTER VALVE W/O BASE PLATE

    Air Operated Diverter Valves provide much improved operator safety by allowing control of flow and pressure to be carried out remotely. When air is sent to the cylinder, the valve closes and allows the system to build pressure. The valve opens when the air is exhausted, reducing system pressure to ...

    View Details » Send Enquiry »

  • psi HOSE CONNECTORS

    20-40K psi HOSE CONNECTORS These Type M Male x Type M Male lance couplers are made from heavy duty stainless steel specifically for water blasting service.

    View Details » Send Enquiry »

  • psi LARGE TUNGSTEN CARBIDE NOZZLE ASSEMBLIES

    APS offers these special Large Tungsten Carbide Hard Hitter Nozzles for use in high flow applications where a solid stream of water is required for big cleaning jobs, such as in paper mills, power plants, tube bundle cleaning, tank cleaning, and reactor vessels.

    View Details » Send Enquiry »

  • psi MALE MACHINE SCREW

    Stainless Steel MMS Nozzles come in pressure ratings to match your flex or rigid lances with female machine screw threads (UNF or UNC). The compact MMS nozzles have a special slimline design that assures that the outside diameter matches the outer diameter of the lance, and they have wrench flats ...

    View Details » Send Enquiry »

  • psi MP STANDARD NOZZLES

    Economical stainless steel MP Standard Style Nozzles come in pressure ratings to match your flex or rigid lances. Our MP Standard Nozzles are designed to go with lances with either right or left hand Autoclave-type medium pressure threads, a special seating design that eliminates the requirement ...

    View Details » Send Enquiry »

  • psi MULTI-GROOVE NOZZLES

    High Production Stainless Steel Multi-Groove Nozzles come in pressure ratings to match your flex or rigid lances. Multi-Groove Nozzles feature FNPT threads to go with lances with MNPT threads. The Multi-Groove Nozzles have wrench flats for easy installation on the lance and offer many options for ...

    View Details » Send Enquiry »

  • psi PENETRATOR NOZZLES

    Stainless Steel Penetrator Nozzles are used with rigid or flex lances with MNPT threads. The rounded nose shape permits a range of forward and side drilling patterns, while the backwards facing ridge allows a large number of pulling orifices to more efficiently clean fouled tubing. Wrench flats ...

    View Details » Send Enquiry »

  • psi PIPE NIPPLES

    We proudly offer a growing line of quality Pipe Nipples, available in 304 stainless steel. Non-standard lengths and right hand threaded nipples are available upon request. When ordering, please specify length and thread size.

    View Details » Send Enquiry »

  • psi PLUGS

    20K psi PLUGS These plugs should be paired with their matching sized gland nut. Brand: Advanced Pressure Systems SKU: 21-004-001

    View Details » Send Enquiry »

  • psi PRESSURE GAUGES

    We offer a complete range of pressure gauges designed specifically for water blasting applications.

    View Details » Send Enquiry »

  • psi PRESSURE REGULATING VALVE

    A Pressure Regulating Valve (PRV), also called a By-Pass Valve, is used on both diesel and electric pumping units to divert a portion of the flow to a low pressure outlet. It is really a hand-adjusted needle valve, and it can be used to control pressure when the application requires a flow at the ...

    View Details » Send Enquiry »

  • psi RADIAL PANCAKE NOZZLE ASSEMBLIES

    We offer a wide variety of sizes in Pancake Style Nozzles for tube cleaning applications. Each is made of hardened stainless steel, features four (4) jets @ 90° that use high pressure sapphire inserts, and the cut-outs on the 3" and above save a great deal of added weight. The largest is 6" wide.

    View Details » Send Enquiry »

  • psi REDUCER BUSHINGS

    Specifically designed for water blasting service, these high quality Reducer Bushings are made from heavy duty stainless steel because of its reliability and durability.

    View Details » Send Enquiry »

  • psi RIGID LANCE HOLDERS

    The threaded end of a rigid lance where it connects directly to a manifold is its weakest point. A break at this threaded connection renders an otherwise good lance unstable. Our Rigid Lance Holders provide full support to the lance at a point well in front of the thread. The lance ...

    View Details » Send Enquiry »

  • psi SAND EDUCTOR NOZZLES

    15K psi SAND EDUCTOR NOZZLES APS proudly offers Sand Eductor Nozzles. Brand: Advanced Pressure Systems SKU: 15-012-000

    View Details » Send Enquiry »

  • psi SCREW-TYPE QUICK DISCONNECT COUPLINGS

    Advanced Pressure Systems designed its Screw-Type Quick Disconnect Hose Couplings with all the best features seen in the market. They are made from heat-treated stainless steel for high durability in water blasting service. Sizes available to suit most hoses. All feature easy-grip texturing for ...

    View Details » Send Enquiry »

  • psi SLIMLINE COUPLINGS

    10-40K psi SLIMLINE COUPLINGS Our Slimline Couplings are available from 10K-40K psi ratings. Check the different O.D.'s for your tube cleaning application.

    View Details » Send Enquiry »

  • psi SOCKET HEAD PLUGS

    Stainless Steel Socket Head Pipe Plugs are available in sizes from 116” NPT to 12” NPT for pressures up to 15K MAWP. A 34” size is also available for pressures up 10K MAWP.

    View Details » Send Enquiry »

  • psi STANDARD NOZZLES W/ TUNGSTEN CARBIDE BLADE

    Tungsten Carbide Tipped Tube Nozzles are to be used in rotary applications for the removal of hardened plugs in heat exchanger tubes.

    View Details » Send Enquiry »

  • psi SWAGE ADAPTERS

    Our Stainless Steel Swage Adapters offer a male thread of a smaller diameter and a female thread of a larger diameter.

    View Details » Send Enquiry »

  • psi THRUSTER NOZZLES

    Stainless Steel Thruster Nozzles are used with flex lances in conjunction with another tube cleaning nozzle. They allow one to “stack” the nozzles so that additional jets can be used for a more thorough cleaning.

    View Details » Send Enquiry »

  • psi TLX NOZZLES

    Stainless Steel TLX Nozzles come in pressure ratings to match your flex or rigid lances. The 15K TLX Nozzles feature FNPT threads to go with lances with MNPT threads, 20K TLX Nozzles have autoclave-type MP threads, and the 40K TLX Nozzles have autoclave-type HP threads. All have wrench flats for ...

    View Details » Send Enquiry »

  • psi TUBE ADAPTERS

    These male by female bushings are used to connect components with female Jetstream lance connection to the industry standard male left-handed medium pressure tubing connections without the use of glands and collars.

    View Details » Send Enquiry »

  • psi TUBE NIPPLES

    We proudly offer a growing line of quality Tube Nipples, available in 304 stainless steel. Non-standard lengths and right hand threaded nipples are available upon request. When ordering, please specify length and thread size.

    View Details » Send Enquiry »

  • psi UNF LANCE CONNECTORS

    Slimline Connectors rated for 15K psi are primarily used on rotary lance machines when downgrading from 20K and 40K to 15K applications.

    View Details » Send Enquiry »

  • psi VALVE CARTRIDGES

    Our Replacement Dump Style and Dry Shut-Off Cartridges enable hand lances, foot valves and air diverter valves to be quickly and easily rebuilt in the field. Similarly, cartridges for the Flow Divider Valves and Pressure Regulating Valves also enable rapid field replacement and servicing.

    View Details » Send Enquiry »

  • psi WAFER CROSSES

    Our Wafer Crosses are made from durable, high strength stainless steel specifically for water jetting service. Wafer Tees also available.

    View Details » Send Enquiry »

  • psi WINGED TYPE HAMMER UNIONS

    Advanced Pressure Systems offers both Screw-Type and Kemper Hammer Unions with large screw threads and a hub that can be "knocked off" with a hammer for quick disconnection of hoses. Connections are available to suit most hoses. NPT connections feature heavy duty O-Rings.

    View Details » Send Enquiry »

  • Quick Disconnect Couplings

    Our Quick Disconnect Hose Couplings are designed with all the best features seen in the market. They are made from heat treated, heavy duty stainless steel for high durability in water blasting service. Sizes available to suit most hoses.

    View Details » Send Enquiry »

  • RIGHT HAND HIGH PERFORMANCE PATENTED SAPPHIRE

    High Performance (HP) Sapphire Nozzle Assemblies are compact inserts made to screw in to the most typical Ultra High Pressure (UHP) rotary nozzle holder bodies common to the UHP cleaning applications.

    View Details » Send Enquiry »

  • RIGHT HAND HIGH PERFORMANCE TESTED SAPPHIRE

    High Performance (HP) Sapphire Nozzle Assemblies are compact inserts made to screw in to the most typical Ultra High Pressure (UHP) rotary nozzle holder bodies common to the UHP cleaning applications.

    View Details » Send Enquiry »

  • STANDARD NOZZLES

    AP Standard Style Nozzles come in pressure ratings to match your flex or rigid lances. They feature FNPT threads to go with lances with MNPT threads, a slimline design that makes it easy to move through almost any size of tubing, and a wide range of options for precision drilled orifices.

    View Details » Send Enquiry »

  • TUBE NIPPLES

    We proudly offer a growing line of quality Tube Nipples, available in 304 stainless steel. Non-standard lengths and right hand threaded nipples are available upon request. When ordering, please specify length and thread size.

    View Details » Send Enquiry »

  • TUNGSTEN CARBIDE HARD HITTER NOZZLES

    Tungsten Carbide Hard Hitter Nozzles are designed especially for use with hand-held control guns for superior surface cleaning. All are made of stainless steel with tungsten carbide orifice inserts, flow straightening vanes, and wrench flats for easy installation. Replaceable carbide inserts are ...

    View Details » Send Enquiry »

  • Tungsten Carbide Nozzle

    34" threaded NPT nozzle holders come in a standard 2-34" long assembly and are also available in a shorter 2-18" long holder. The carbide inserts below comes in eleven (11) different orifice sizes to suit your applications.

    View Details » Send Enquiry »

  • ULTRA-POLISHED NOZZLE HOLDERS

    These 12" NPT threaded nozzle holders come in a female assembly or a male assembly. The carbide insert comes in 12 different orifice sizes to suit your flow pressure requirements.

    View Details » Send Enquiry »

[+] View All Products

Search


Contact Details

Tomball, TX 77375, , United States

View Mobile No.