Post Buy Requirement
BC
United States
Add Review

Caster Wheels

EXTRA HEAVY DUTY CASTERS Series 72-A / 73-A

  • Series Series 72-A / 73-A
The Series 72-A and 73-A Casters are designed specifically for power drawn applications. The offset king pin places the wheel near the outboard edge of the vehicle assuring great stability and excellent tracking. A large main load bearing provides the easy swiveling action desired. The selection of wheels and tread types will meet any power drawn requirement.
Features

Construction: Durable fabricated construction features extra heavy steel plate for top plate and yoke.
Swivel: A large diameter precision machined ball race with a full compliment of large diameter hardened and polished steel balls make up the main load bearing. Secondary bearing is a precision thrust bearing.
Fork: Deep drawn legs for strength, continuously welded inside and out the yoke.
King Bolt: High strength steel with crown nut and cotter pin.
Axle: Hugh strength steel, threaded on both ends.
Wheels: 8, 10, and 12 inch diameters in rubber, plastic, urethane or metal tread.
Wheel Bearings: All wheels are available with straight or tapered roller bearings. Straight roller bearings consist of a split outer raceway with high quality hardened steel rollers held parallel to the axle by a steel retainer. A hardened and ground sleeve provides a precision inner race.
Lubrication: Readily accessible pressure fittings in swivel assembly and hub.
Finish: Durable corrosion resistant finish.

RIGID CASTER: The 73-A matching rigid caster has the same type of welded steel construction, wheel offset and wheel selection.
View Complete Details

HEAVY DUTY DUAL WHEEL CASTERS Series 76-A / 77-A

  • Series Series 76-A / 77-A
Series 76-A 77-A
HEAVY DUTY DUAL WHEEL CASTERS

Dual wheeled casters are used primarily for heavy duty trailer and cart applications. They are generally specified where high capacity, floor protection or a limited overall height is desired. The inherent "differential action" of the dual wheel caster permits it to swivel with much less effort or power than single wheel casters. All dual wheeled casters have a center support leg for additional strength.
Features
Construction: Heavy section steel plate for both the top plate and yoke base, precision machined race way for bearing.
Swivel Caster: Large diameter hardened and polished steel balls in a large diameter precision machined raceway constitute the main load bearing. The secondary load bearing is a precision tapered roller thrust bearing.
King Bolt: High strength steel bolt with crown nut and cotter pin.
Axle: High strength steel, threaded at both ends.
Wheel Bearings: Tapered roller bearings or straight roller bearings are available for all casters. Straight roller bearings have a hardened and ground steel sleeve that forms a precision inner race.
Lubrication: Readily accessible pressure fittings for swivel assembly and in the wheel hub.
Finish: Durable corrosion resistant finish.

RIGID CASTER: The Series 77-A rigid caster is made of the same heavy section plate as the matching swivel. Outer legs are deep drawn for strength. Legs and center support are continuously welded to the top plate both inside and out.
View Complete Details

EXTRA HEAVY DUTY CASTERS Series 74-A / 75-A

  • Series Series 74-A / 75-A
Series 74-A 75-A
Extra Heavy Duty Casters

The Series 74-A swivel caster and 75-A rigid caster are designed for the rigors of power drawn applications. heavy gauge steel construction. large swivel bearing. excellent wheel selection.
Features

Construction: Durable fabricated construction features extra heavy steel for top plate and yoke.
Swivel: A large diameter precision machined ball race with a full compliment of large diameter hardened and polished steel balls make up the main load bearing. Secondary bearing is a precision tapered roller thrust bearing.
Fork: Wide, deep formed legs are continuously welded inside and out to the yoke base.
King Bolt: High strength steel bolt with slotted adjusting nut and cotter pin.
Axle: Hugh strength steel, threaded on both ends.
Wheels: 8, 10, and 12 inch diameters in rubber, plastic, polyurethane for floor protection or metal tread.
Wheel Bearings: All wheels are available with either straight or tapered roller bearings. Straight roller bearings have a hardened and ground sleeve that forms a precision inner raceway.
Lubrication: Readily accessible pressure fittings in swivel assembly and hub.
Finish: Durable corrosion resistant finish.

RIGID CASTER: The 75-A matching rigid caster has the same type of welded steel construction and wheel selection.
View Complete Details

LIGHT TO MEDIUM DUTY CASTERS Series 50-A / 51-A

  • Series Series 50-A / 51-A
Series 50-A 51-A
Light to Medium Duty Service

Construction: Heavy gauge steel deep formed for maximum strength.
Swivel bearing: Hardened and polished steel balls in deep formed raceway designed not only to carry the load but also to absorb side thrust between the deeply embossed outer apron of the base and formed inner flange of the fork.
Fork: Legs and fork are one piece pressed steel construction.
King Pin: Steel rivet, orbitally formed to provide equal strength at both ends.
Axle: A square neck under the head of the axle fits in a square hole in the leg of the fork which prevents the axle from turning. In addition, a steel sleeve fits over the axle (except for the 2 size) and is held rigidly between the fork members, thereby greatly strengthening the caster, preventing wear on the axle and providing a larger axle bearing for the wheel.
Wheel bearing: Plain bearing wheels are sized to rotate directly on the sleeve described above. Straight roller bearing wheels rotate on a hardened and ground steel sleeve which provides a precision inner raceway for the bearing.
Lubrication: Swivel is lubricated at the factory. Pressure fitting is provided in the wheel hub or in recessed head of hollow axle.
Finish: Zinc plated finish for all parts except the wheel.

Rigid Caster: One-piece heavy gauge steel construction, deeply formed and embossed to equal the strength and durability of the companion swivel caster.

This single ball race design provides an economical, yet highly durable caster for light industrial use and a wide variety of institutional and commercial applications. They are used for dollies, laundry and food handling carts, light equipment and other mobile requirements.
View Complete Details

LIGHT TO MEDIUM DUTY CASTERS Series 62-A / 63-A

  • Series Series 62-A / 63-A
Series 62-A 63-A
Light to Medium Duty Service
The Series 62-A casters are ideal for light duty portable handling applications. They are particularly suited for use on hospital, institutional, food handling, factory and laboratory service equipment. This series is available with soft or hard tread rubber wheels or semi-steel wheels. The solid rubber wheels are available with self-lubricating bushings.


Features

Construction: Heavy gauge steel deep formed for maximum strength.
Swivel bearing: Escalator ball races assure easy swiveling. The raceway is coined and work hardened for maximum wear.
Fork: Legs and fork are one piece pressed steel construction.
Axle: Bolt and nut axle construction. A key under the head of the axle fits securely into a hole in the leg of the fork to prevent the axle from turning.
Wheel bearing: Plain bearing wheels are sized to rotate directly on the axle.
Lubrication: Swivel is lubricated at the factory.
Finish: Zinc plated finish for all parts except the wheel.

Rigid Caster: Two-piece construction with fork secured to the top plate; equal the strength and durability of the companion swivel caster.
View Complete Details

LIGHT TO MEDIUM DUTY CASTERS Series 60-A / 61-A

  • Series Series 60-A / 61-A
Series 60-A 61-A
Light to Medium Duty Service The Series 60-A casters are idel for light duty portable handling applications. They are particularly suited for use on hospital, institutional, food handling, factory and laboratory service equipment. This series is available with soft or ahrd tread rubber wheels or semi-steel wheels. The solid rubber wheels are available with self-lubricating bushings.
Construction: Heavy gauge steel deep formed for maximum strength.
Swivel bearing: Escalator ball races assure easy swiveling. The raceway is coined and work hardened for maximum wear.
Fork: Legs and fork are one piece pressed steel construction.
Axle: Bolt and nut axle construction. A key under the head of the axle fits securely into a hole in the leg of the fork to prevent the axle from turning.
Wheel bearing: Plain bearing wheels are sized to rotate directly on the axle.
Lubrication: Swivel is lubricated at the factory.
Finish: Zinc plated finish for all parts except the wheel.

Rigid Caster: Two-piece construction with fork secured to the top plate; equal the strength and durability of the companion swivel caster.
View Complete Details

STEM CASTERS

STEM CASTERS

Stem casters are made for a variety of purposes with literally thousands of casters, wheels and connecting stems to choose from. Bond can support nearly all styles and connections you require.

Common applications are:
Display Cases
Furniture Industry
Food Industry
Wire Carts
Doors - security, hanger, appliances, etc.
Jack Casters
Replacement Casters
Manufacturing
Semiconductor
Airline
Industrial Material Handling
Please let us know how we can help you.
View Complete Details

HEAVY DUTY CASTERS Series 40-A

  • Series Series 40-A / 41-A and Series 40-AW / 41-AW
Series 40-A 41-A and Series 40-AW 41-AW
The Series 40-A caster with its capacity range and large wheel selection will find applications in factory, commercial and institutional requirements. Design and construction features assure long life.


Features

Construction: Heavy gauge steel is cold-forged to provide strong, rigid top plate and cup assembly.
Swivel Bearing: Hardened and polished steel balls in coined and hardened upper raceways assure easy swivel action and long service life.
Fork: Deep formed legs for strength, welded to cup.
King Bolt: Heavy duty steel bolt with threaded lock nut.
Axle: Threaded axle bolt locks in place. A hardened and ground sleeve fits over the axle and is held rigid between the legs for exceptional rigidity and strength.
Wheels: A full selection of wheels up to 2-12 tread width.
Lubrication: Pressure fittings for swivel and wheel bearings. Solid rubber, Bondcelon, and Bondrelene wheels are lubricated through a hollow axle with pressure fitting. AL other wheels lubricate through the hub.
Finish: Durable corrosion resistant finish.
View Complete Details

MEDIUM DUTY CASTERS Series 42-A Caster

  • Series Series 42-A / 43-A
The Series 42-A caster offers a larger top plate (6-12" X 5") and slotted bolt holes for two mounting patterns and is recommended for medium duty applications in factories and warehouses. A full range of wheel types offers a choice of floor protective types and long service life.



Features

Construction: Heavy gauge steel is cold-forged to provide strong, rigid top plate and cup assembly.
Swivel Bearing: Hardened and polished steel balls in coined and hardened upper raceways assure easy swivel action and long service life.
Fork: Legs are formed for strength and continuously welded to the cup.
King Bolt: Steel rivet, orbitally formed to provide equal strength at both ends.
Axle: Threaded axle bolt secured with lock nut.
Wheels: A full selection of wheels for any floor surface.
Wheel Bearings: All wheels are available with straight roller bearings which consist of a split outer raceway with high quality hardened steel rollers held parallel to the axle by a steel retainer. A hardened and ground sleeve provides a precision inner raceway.
Lubrication: Readily accessible pressure fittings to swivel assembly and to wheel bearings through wheel hub or hollow axle.
Finish: Durable corrosion resistant finish.

RIGID CASTER: Matches the swivel caster in all respects.
View Complete Details

SUPER DUTY CASTERS Series 80-A Swivel Casters

  • Series Series 80-A Swivel Casters
Series 80-A Swivel Casters
SUPER DUTY CASTERS

The Series 80 caster is a heavy, rugged caster precision engineered and built with precision to meet those extra capacity demands with the utmost in reliability and safety. Under load these are easy rolling, free swiveling performers.
Features
Construction: Heavy section steel plate for both top plate and yoke base, precision machined for bearing.
Swivel: Main load bearing is a large diameter raceway with large diameter hardened steel balls. Secondary load bearing is a tapered roller bearing.
Fork: Wide, deep formed legs are continuously welded both inside and out.
King Bolt: High strength steel bolt with crown nut and cotter pin.
Axle: High strength steel bolt threaded both ends.
Wheels: Selection of four tread surfaces plus v-grooved in a variety of sizes.
Wheel bearings: Tapered roller bearing or straight roller bearing with hardened and ground steel sleeve.
Lubrication: Readily accessible pressure fittings to swivel and in wheel hub.
Finish: Durable corrosion resistant finish.
RIGID CASTER: The 79-A is the matching rigid for the 80-A swivel caster. It is made of the same heavy section plate. Legs are deep formed and welded both inside and out side and braced for maximum support.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Bond Casters)
  • Manheim, PA 17545 map, United States
  • Share us via

( ! ) Warning: Cannot modify header information - headers already sent by (output started at /htmlcachedir2/dynamic-html-pages/eitempfilen/usa/company/bond-casters/caster-wheels.htm:44) in /home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php on line 59
Call Stack
#TimeMemoryFunctionLocation
10.0005457624{main}( ).../index.php:0
20.01512040240include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/country-vanity/country_index_page_common_script.php' ).../index.php:309
30.02422762872include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php' ).../country_index_page_common_script.php:282
40.02943698560header ( ).../index.php:59
ExportersIndia: 404 Error Found
404Oops! It seems this page is not available

We connect Buyers and Sellers

Tell us What you Need

Trending Categories

Find Suppliers by Region


View All Categories

Find Suppliers by Country

Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice