Product / Services
Post Buy Requirement

My ExportersIndia

For Buyer

For Seller

For Help

BC

Bond Casters
location United States

Write a Review
Call Now Call Now

Our Products

  1. Caster Wheels 10 Products available
  2. Bearings 5 Products available
  3. Caster Wheels, Casters & Rollers 4 Products available

  4. Bearings And Bearing Components

    1 Products available

  5. Bushings

    1 Products available

  6. Hardware Fittings And Accessories

    1 Products available

  7. Mechanical Lock

    1 Products available

  8. Bags, Pouches, Card Holder & Cases

    1 Products available

  9. Carts & Trolleys

    1 Products available
  10. Others Products 12 Products available

Our Products

We offer a complete product range of CUSTOM TRUCK LOCKS, V-GROOVE WHEELS, MATERIAL HANDLING DOLLIES 2076, Material Handling Dollies and Bondrelene Wheel

Self-lubricating Bushing

Self-lubricating Bushing

Self-lubricating bushing A good substitute for the anti-friction bearing in small wheels or where moisture is an important factor. Shown is a sintered steel, oil impregnated.
View Complete Details
Ask Latest Price & Details
CUSTOM TRUCK LOCKS

CUSTOM TRUCK LOCKS

CUSTOM TRUCK LOCKS Not all applications can be managed with the standard Bond Truck Lock offering. Some areas we have addressed are: Height:Overall height can be adjusted or can be shimmedRetracted height can be adjusted Base movement: Can be reduced when movement during the locked position is a problemFinish:Powder coat paintedZinc Plated Mounting configuration bolt hole pattern changePad material and mounting rivet configuration
View Complete Details
Ask Latest Price & Details
V-GROOVE WHEELS

V-GROOVE WHEELS

  • Dia "A" 2-1/2
  • Face "B" 1
  • Hub "C" 1-7/16
  • Approx. Weight 7/8
  • Load Rating 500
Bond v-grooved wheels are typically made from cast semi-steel designed with a heavy cross section for maximum strength and load carrying capacity. Most wheels are solid web design except those higher capacity wheels which are reinforced with heavily sectioned ribs. Both the v-groove and face are precision machined, concentric with the hub bore to ensure smooth rolling action on inverted angle iron track. Wheel face is broad and strong for use "off-track". A relief groove at the base of the "V" assures equal weight distribution and tends to aid the self-cleaning action of the angle iron track. Bond produces v-groove wheels from aluminum, ductile iron, forged steels, phenolic, polyurethane (70 Shore D), and stainless steel. Custom widths, grooves, hub lengths, bearings, plain bores and keyways are also available by consulting the factory.
View Complete Details
Ask Latest Price & Details
MATERIAL HANDLING DOLLIES 2076

MATERIAL HANDLING DOLLIES 2076

  • Weight 14-1/2 lbs.
  • Series MODEL 2076
When you need to move just about anything with posts or even without posts these dollies are real people savers! They are compact triangular shaped dollies. These are placed under each corner of the article you intend to move; once all the dollies are in place you simply roll your article through doorways, onto elevators, down the street, into the truck, or across the room! The swivel wheels and tripod wheel arrangement allow the article to be moved in any direction. CONSTRUCTION WEIGHT: 14-12 lbs. BODY: Cast semi-steel with 1-14 deep center hole measuring1-34 at the top and 1-14 at the bottom. WHEELS: Must be specified. 2-12 wheels are chosen based on the weight carried and the environmental needs. WHEEL CHOICES: Capacity (lbs.) dolly Hard tread, black solid rubber 525 Soft tread, black solid rubber330 Semi-steel 525
View Complete Details
Ask Latest Price & Details
Material Handling Dollies

Material Handling Dollies

  • WHEELS 2” diameter X 1-11/16” face hard black plastic wheels.
  • WEIGHT CAPACITY 600 lbs.
When you need to move just about anything with posts or even without posts these dollies are real people savers! They are compact triangular shaped dollies with a cup center; often called cup dollies or cup casters. One dolly is placed under each post or leg of the article you intend to move; once all posts have dollies you simply roll your article through doorways, onto elevators, down the street, into the truck, or across the room! The swivel wheels and tripod wheel arrangement allow the article to be moved in any direction; even top heavy articles go where you want them too safely and securely.BODY: Cast semi-steel with 2 deep well, measuring 5 atthe top and 3-316 at the bottom. Clearance is 58 from the floor. WHEELS: Must be specified when ordering. The 2 diameterwheels are chosen based on the weight carried and theenvironmental needs. MODEL 2127 WHEEL MATERIAL CHOICES Capacity (lbs.) dolly Hard tread, black solid rubber375Soft tread, black solid rubber 225Semi-steel 450Bondrelene black plastic 270TuffBond white plastic (shown above)450
View Complete Details
Ask Latest Price & Details
DOLLY CARRY CASE

DOLLY CARRY CASE

  • WEIGHT 3/4 lbs.
  • Dimensions: 12” diameter by 9” height
  • MODEL 2127 DOLLIES
CONSTRUCTION WEIGHT: 34 lbs. BODY: Rugged Ballistic Nylon material with heavy dutyplastic piping. Large tooth zipper and two handlesfor ease of use. DIMENSIONS: 12 diameter by 9 height CAPACITY: HOLDS 4 MODEL 2127 DOLLIES
View Complete Details
Ask Latest Price & Details
Bondrelene Wheel

Bondrelene Wheel

  • Diameters 2
  • Face 3/4
  • Hub Length 7/8
  • Bearing ID 1/4
The Bondrelene wheel is ideally suited for light, medium and medium heavy duty uses in process industries of all types, laundries, bakeries, meat packaging plants, manufacturing plants and countless applications in labs, institutions and warehouses.Bondrelene wheels offer high impact resistance, rolling ease, floor protection, and durability. They are a hard, non-marking, stain resistant wheel with zero water absorption, impervious to grease, oil gasoline, cooking fats and most acids. They may be steam cleaned. Operating temperature range is -20 to +220 degree Fereheit. Bondrelene wheels are available with plain bore, plastic bearing, or straight roller bearings.
View Complete Details
Ask Latest Price & Details
ECONOMY CASTERS Series 48-A-SP

ECONOMY CASTERS Series 48-A-SP

  • Series Series 48-A-SP / 49-A-SP
Series 48-A-SP 49-A-SPMedium Heavy Duty Service The Series 48-A-SP offers the industry standard plate and height for medium duty casters. This double ball race caster is recommended for use in variety of portable equipment. They are also excellent for warehouse trucks and dollies, portable racks and shelving, as well as for light duty tow lines.This caster Series is an IMPORT brandwith a Bond American made wheel. Features Construction: 14" cold-forged steel provides strong top plate and fork assembly.Swivel Bearing: Hardened and polished steel balls in hardened upper and lower raceways assure easy swivel action and long service life.King Bolt: 58" bolted king pinAxle: Threaded axle bolt secured with lock nut.Wheels: A full selection of wheels for any floor surface.Wheel Bearings: All wheels are available with straight roller bearings which consist of a split outer raceway with high quality hardened steel rollers held parallel to the axle by a steel retainer. A hardened and ground sleeve provides a precision inner raceway.Lubrication: Readily accessible pressure fittings to swivel assembly and to wheel bearings through wheel hub or axle drilled for oiling (optional).Finish: Durable corrosion resistant zinc plated finish.RIGID CASTER: Matches the swivel caster in all respects.
View Complete Details
Ask Latest Price & Details
Four Wheel Cart

Four Wheel Cart

Bond produced this cart for a construction company to aid in transport of generators. The carts were used to move through construction sites keeping the installation process steadily moving. The carts were narrow and held over 3000 lbs of materials, had aluminum diamond plate reinforcement plus a very heavy plywood base. Casters were heavy duty and low profile to keep the materials at an ideal height.
View Complete Details
Ask Latest Price & Details
CAST IRON CASTERS Series 3-A / 1-A

CAST IRON CASTERS Series 3-A / 1-A

  • Series Series 3-A / 1-A
Series 3-A 1-ACast Iron CasterThe Bond 3A single ball race swivel caster and the companion 1-A rigid casters are unusually sturdy, efficient and economical to buy and maintain. They are made of semi-steel and when combined with the plain bearing semi-steel wheel, are well suited for high temperature applications. They are also available with hard and soft tread rubber wheels.FeaturesConstruction: Cast semi-steel top plate, cup and legs provide excellent resistance to impact and abuse.King Bolt: Rivet type with large steel washer for strength.Axle: For roller bearing wheels, bolt and nut construction is used. Rivets are used on plain bearing wheels, except for 2" thru 4" solid rubber wheels which use a cotter pin axle. Lubrication: Pressure fittings for swivel and straight roller bearing wheels. Oil holes are provided for plain bearing semi-steel wheels.Companion Rigid Caster: The 1-A Series rigid caster is a one peice semi-steel casting with generously reinforced sections for extra strength.
View Complete Details
Ask Latest Price & Details
BONDCELON WHEELS

BONDCELON WHEELS

  • Dia. 3
  • Face 1-1/2
  • Hub Length 1-5/8
  • Load Rating 500
The Bondcelon wheel is made of macerated fabric which is impregnated with phenolic resin and molded under high pressure and heat to form a high density, tough, shock resistant economically priced wheel. They provide excellent load carrying characteristics and are non-marking. They will not spark. Bondcelon wheels are resistant to water, oils, grease, animal fats, commonly used acids and detergent solutions. Temperature range is -50 to +260 degree Fahrenheit in continuous operation with intermittent use to 300 degree Fahrenheit .These wheels are provided with straight roller bearings in all sizes with tapered roller bearings available in diameters of 5 inches and larger.Lubrication is through a pressure fitting recessed in a hollow axle. Most larger sizes can be fitted with a pressure fitting in the hub on request. Optional features:Consult factory for high heat applications, straight or slab sided wheels, special hub lengths, grooved wheel face, grease seals or other bearing types.
View Complete Details
Ask Latest Price & Details
Truck Locks

Truck Locks

  • Part Number 4TL
  • Height (inches) Locked 5-5/8
  • Height (inches) Retracted 4-9/16
  • Weight (lbs) 7-1/2
Bond Truck Locks hold castered equipmentin a fixed position. These rugged semi steel truck locks are easily fitted to the underside of castered equipment to prevent inadvertent movement. Stepping on the petal activates a toggle action engaging the large spring loaded, friction based, brake disk tightly against the floor (see Photograph A). Pressing on the release rod with less than 7 foot pounds disengages the lock (see Photograph B). Suggested mounting configuration:For equipment with two rigid and two swivel casters, a single truck lock mounted between the swivel casters is sufficient. Equipment with four swivel casters should have two truck locks, mounted on opposite sides of the equipment. Note: locks are designed to firmly fix the position of the equipment, not to lift it off the floor. Bond Truck Locks are easy to maintain and repair. Only an annual greasing is suggested for maintenanceParts are available and repaired with press nuts or C clips
View Complete Details
Ask Latest Price & Details
SUPER DUTY CASTERS Series 78-A / 79-A

SUPER DUTY CASTERS Series 78-A / 79-A

  • Series Series 78-A / 79-A
Series 78-A 79-ASUPER DUTY CASTERS The Series 78 and 79 are heavy, rugged casters precision engineered and built with precision to meet those extra capacity demands with the utmost in reliability and safety. Under load these are easy rolling, free swiveling performers. FeaturesConstruction: Heavy section steel plate for both top plate and yoke base, precision machined for precision unit load bearing.Swivel: Main load bearing is a large diameter self-contained precision roller bearing. Secondary load bearing is a tapered roller bearing.Fork: Wide, deep formed legs continuously welded both inside and out.King Bolt: High strength steel bolt with slotted adjusting nut and cotter pin.Axle: High strength steel bolt threaded both ends.Wheels: Selection of multiple tread surfaces plus v-grooved in a variety of sizes.Wheel Bearings: Tapered roller bearing or straight roller bearing with hardened and ground steel sleeve.Lubrication: Readily accessible pressure fittings to swivel and in wheel hub.Finish: Durable corrosion resistant finish.RIGID CASTER: The 79-A is the matching rigid for the 78-A swivel caster. It is made of the same heavy section plate. Legs are deep formed and welded both inside and out side and braced for maximum support.
View Complete Details
Ask Latest Price & Details
Flanged Ball Bearings

Flanged Ball Bearings

Flanged Ball Bearings Bond wheels are offered with a variety of ball bearings. Generally two bearings are used per wheel. A separate sleeve is not required when the bearing contains an integrated sleeve. These are chosen for light to medium duty service. Consult factory for application information.
View Complete Details
Ask Latest Price & Details
LIGHT DUTY FLOOR LOCK

LIGHT DUTY FLOOR LOCK

  • Model 4TL-Tubular
  • Height Retracted (inch) 4-1/4
  • Height Locked (inch) 5-5/8
  • Weight (lbs) 3.5
LIGHT DUTY FLOOR LOCK Bond offers a lighter duty yet very sturdy floor lock for applications with lighter loads such as warehouse "picking" carts. These are commonly called "tube" floor locks based on the construction materials. They follow a similar principle for operation as the Bond heavy duty product with a spring loaded brake pad. Not recommended for use on uneven surfaces. This floor lock is an ideal way to securely imobilize castered equipment. One floor lock is used when there are swivel and rigid casters and two floor locks are used when there are all swivel casters.The mounting plate is the same for all Model Floor Locks:Top plate is 4" X 4-12"Bolt hole spacing is 2-58" X 3-58" slotted holes (3" X 3" on center)Bole Hole size is 38"
View Complete Details
Ask Latest Price & Details
STAINLESS STEEL FLOOR LOCK

STAINLESS STEEL FLOOR LOCK

  • Model 4TL SS-Tubular
  • Height Retracted (inch) 4-1/4
  • Height Locked (inch) 5-5/8
  • Weight (lbs) 3.5
STAINLESS STEEL FLOOR LOCK Bond offers a STAINLESS STEEL floor lock for steam cleaning and clean room applications. These are commonly called "tube" floor locks based on the construction materials. They follow a similar principle for operation as the Bond heavy duty product with a spring loaded brake pad. These are not recommended on uneven flooring. This floor lock is an ideal way to securely imobilize castered equipment. One floor lock is used when there are swivel and rigid casters and two floor locks are used when there are all swivel casters.The mounting plate is the same for all Model Floor Locks:Top plate is 4" X 4-12"Bolt hole spacing is 2-58" X 3-58" slotted holes (3" X 3" on center)Bole Hole size is 38"
View Complete Details
Ask Latest Price & Details
CAST IRON CASTERS Series 36-A / 1-A

CAST IRON CASTERS Series 36-A / 1-A

  • Series Series 36-A / 1-A
Series 36-A 1-ACast Iron Caster The Bond 36-A and the companion 1-A casters are used for rugged service in factories and industrial plants where impact and other abuse are common. The design of the double ball race swivel assures long service life.FeaturesConstruction: The base section and fork are designed to provide the optimum distribution of metal in each section for strength and stress absorption.King Bolt: The high strength bolt is totally surrounded by an exceptionally large boss section relieving the bolt of all side thrust. A large hardened steel washer is held rigid against the boss section for additional strength at this point. The king bolt is secured by a slotted adjusting nut with cotter pin.Swivel: Two deep, smoothly rounded ground raceways of almost equal diameter, placed one below the other provide a double level full ball bearing swivel for smooth easy swiveling and long life.Lubrication: Pressure fittings in swivel and wheel hub.
View Complete Details
Ask Latest Price & Details
BOND PLAIN BEARING WHEELS

BOND PLAIN BEARING WHEELS

BOND PLAIN BEARING WHEELS will be furnished with bores as listed in the specifications. Bores to your specifications can be furnished at a slightly higher price. Faces of plain bore wheels are not normally machined. Oil holes for lubrication are provided in the hubs of all wheels. Pressure fittings can be furnished in wheels 4 in diameter and larger at an additional cost.
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.