Adhesives & Sealants #4728941

APAO hot melt adhesives (Amorphous Poly-Alpha-Olefins), also called Polyolefin Hot Melt adhesives are designed to be a Lower cost adhesive option for most Product Assembly applications. Polyolefin hot melts are often used as a lower cost replacement for Polyamide Hot Melt applications.

APAO or Polyolefin hot melts are commonly used to bond Open and Closed Cell Foams to Foams, Metals, Papers, Plastics and Woods. Polyolefin based hot melts are often used when High Heat Resistance is required or good acid, chemical and fuel resistance is needed.

APAO hot melt adhesives are non-crystalline adhesives and are soft, tacky, and flexible; this makes them a great choice for most Product Assembly applications when Long Open Times, High Heat Resistance and Strong Bonds to various substrates is needed.

Fugitive hot melt adhesive, also called Credit Card glue or Booger glue, is a Low-tack adhesive that produces removable, non-permanent bonds.

Fugitive hot melt adhesives form a Temporary Bond between two substrates leaving minimal residue and can be separated without damaging either substrate.

Cattie Adhesives manufactures a full line of high performance Fugitive Removable Hot Melt Adhesives; available in several degrees of Color, Peel Strength, Tack, Shear Strength and Viscosity.

Our Fugitive Hot Melt adhesive can be formulated as Non-Staining and Water White Color; making them a great choice for Credit Card Affixing and Direct Mail applications.

Our Fugitive adhesives are widely used on Direct Mail and Marketing materials, where a substrate material product insert, sample or a return envelope is glued to another, usually a paper or film mailing envelope or a magazine.

Fugitive hot melt adhesive is not designed to be reseal-able; for this we also make a Repositionable Hot Melt.

Dextrin Adhesive, also called Brown Glue, is used on a variety of mostly porous surfaces. Dextrin or Resin Dextrin Blends are a great choice for many Laminating, Paper Converting & Product Assembly applications and offer a Lower cost alternative with better Clean-Up properties than most Full-Resins.

Cattie Adhesives manufactures a Full Line of Dextrin and ResinDextrin Adhesive Blends for many industrial Packaging, Paper Converting and Assembly Applications.

Our Dextrin and Resin Dextrin Blends can be formulated for Medium or Very Strong Final bonds to a variety of porous substrates.

Our Dextrin and Resin Dextrin Blends are 100% Water-based with No VOCs.



Dextrin adhesives are:

MediumFast setting.
Good penetration to porous materials.
Good Resistance to heat and cold.
High tack (wet) and high solids.
Used on papers, wood, corrugated, coated board, vinyl and a variety of substrates.

Cohesive Adhesive, also called Cold Seal Adhesive is designed to stick only to itself; the Cohesive is applied to each surface to be bonded together and then Dried. The final bond is not created until the two Dried surfaces make contact again.

Cattie Adhesives manufactures a Full Line of both Natural Latex and Synthetic Latex Cohesives for Medical Bandages and many industrial and Medical Packaging, Paper Converting and Product Assembly Applications.

Our Cohesive can be formulated for Low, Medium or Very Strong Final bonds to a variety of porous and non-porous substrates including UV, Clay Coated and SBS Papers, Films, Foils, Woods, Plastics, Corrugated material, Coated board and Vinyl.

Our Cohesive Adhesive is 100% water-based with no VOCs and can be Custom Formulated to be FDA Compliant for Direct and Indirect Food and Skin Contact.

We also have the capability to Coat our Cohesives onto many different substrates including felts, films, liners, magnet, papers, plastics, and textiles; for various medical and industrial applications.

Liquid PUR (Polyurethane) adhesives are reactive moisture curing adhesives known for Strong Bonds and Exceptional Heat, Cold and Moisture-Resistance; this makes them an excellent choice for most difficult to bond, low energy substrates and they perform very well in extreme weather environments.

Liquid PUR One-component Cold Liquid moisture-cured polyurethane adhesives Our version of Industrial Strength Gorilla Glue.

Our Liquid PUR adhesive forms permanent bonds by a chemical reaction with moisture from the substrate or environment.

These Cold Liquid PUR adhesives are liquid at room temperature so bonded parts must be pressed together and held during the curing process.

Standard Features:

Great for wood, metals, ceramics, most plastics, HPL, Corian, stone and most porousnonporous materials.
100% waterproof adhesive that bonds almost everything.
Epoxy like strength; no mixing and fast cure time.
Excellent Sandability.
100% solids and solvent free.
Assembly time after glue application: 20-30 minutes.
Application temperature: Above 50F.
Viscosity range: 4, 000 10, 000 cps.