Post Your Requirement Menu

Welcome User

Other Products / Services

Our offered Product range includes Shackles, nylon web sling, Fixed Spreader Beam, Absorbent Booms and Lanyards.

Shackles

  • Categories Featured, Rigging Hardware

Capacities 13 thru 55 metric tons o Forged – Quenched and Tempered, with alloy pins. Working Load Limit permanently shown on every shackle Hot Dip galvanized or Self Colored. Fatigue rated. Shackles 25t and larger are RFID EQUIPPED. Shackles can be furnished proof tested. With certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Charges for proof testing and certification available when requested at the time of order. Shackles are QuenchedTempered and can meet DNV impact requirements of 42 joules at -20 C. Crosby products meet or exceed all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, Crosby products meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME 830.26. Look for the Red Pin® … the mark of genuine Crosby quality.

View Complete Details

nylon web sling

  • Category Slings

Nylon web slings are made for daily use under good to moderate lifting conditions. Nylon stretches more to help avoid shock loading. Our synthetic web products measure up. Our synthetic web products don’t merely meet our own strict standards for workmanship and performance. They also meet or exceed these military and federal specifications: ANSI Standard Z1.8 – specifications of general requirements for a quality program. MIL-Standard-105 – sampling procedures and tables for inspection by attributes. MIL-W-4088F – military specification for textile webbing —woven nylon. MIL-W-23223A – military specification for slotted nylon webbing. Fed. Spec. VT-285-E – federal specification for polyester thread. Fed. Spec. VT-295-E – federal specification for nylon thread.

View Complete Details

Fixed Spreader Beam

  • MODEL 30-2-4
  • WEIGHT (LBS.) 45

Ideal where headroom is not limited. Adds stability to lift. Available with standard chain or wire rope rigging. Available with Adjust-A-Leg® rigging for off center load adjustment (minimum lifting capacity will be approximately 10-15% of beam rating). Wide range of additional sizes and capacities available. Complies with ASME standards.

View Complete Details

Absorbent Booms

Oil-Dri Premium absorbent clay granules are used to absorb most types of oils, mixtures of soluble oils, acids, paints, inks, water and other liquid spills. Proper use of this product can reduce slipping accidents, prevent flash oil fires and keep floors clean and dry. Specifications Material: Polypropylene Length sizes: 10″ and 18″ Diameter sizes: 5″ and 8″ Fluids Absorbed : Oil Only Petroleum

View Complete Details

Absorbent Pads

Oil-Dri Premium absorbent clay granules are used to absorb most types of oils, mixtures of soluble oils, acids, paints, inks, water and other liquid spills. Proper use of this product can reduce slipping accidents, prevent flash oil fires and keep floors clean and dry. Specifications 15 x 19 Inch heavy weight hydrophobic pads repel water while absorbing petroleum based fluids. Double sided coverstock offers extra durability, and bonding allows fluid to spread through the material quicker for the best absorption rate. Ideal for automotive, industrial, and marine applications. 100box absorbs up to 26 gallons. Number Of Pads: 100 Pad Dimensions (In.): 15 X 19 Inch

View Complete Details

Adjustable Spreader Beam

Ideal where headroom is not limited. Adds stability to lift.Telescopic spread standard. Available with standard chain or wire rope rigging. Available with Adjust-A-Leg® rigging for off center load adjustment (minimum lifting capacity will be approximately 10-15% of beam rating). Wide range of additional sizes and capacities available. Complies with ASME standards. This is an adjustable spreader beam that provide a versatile solution for handling many different sized loads, ideal for outdoor applications.

View Complete Details

air hoists

We offer Harrington Hoists, a leading supplier of electric chain and wire rope hoists, air powered hoists, lever hoists, manual hand chain hoists, trolleys, cranes and crane components. Air Chain HoistsTrolleys – TCR Large Capacity Air Chain Hoists – TCS Air Powered Hoists – AH Air Chain Hoists – TCR Air Chain Hoists – AL Lube FreeSpark Resistant Air Chain Hoists – AW Wash DownSpark Resistant Air Chain Hoists – AS Spark Resistant Air Chain Hoists

View Complete Details

Air Tugger Rentals

We are adding new equipment for rental on an on-going basis, so if you don’t see exactly what you’re looking for, call us to discuss your particular needs. Air Tuggers – up to 10, 000 lbs.

View Complete Details

Block Rentals

Blocks available: 90 tons 50 ton 40 ton 20 ton We are adding new equipment for rental on an on-going basis, so if you don’t see exactly what you’re looking for, call us to discuss your particular needs.

View Complete Details

Blocks

The Crosby Group has been manufacturing products such as hooks, swivels, shackles and blocks since 1956, setting the industry standard for quality. Click the images below to see the full list of Crosby Blocks, as well as their sizes and specifications.

View Complete Details

clips

Each base has a Product Identification Code (PIC) for material traceability, the name CROSBY or CG, and a size forged into it. Based on the catalog breaking strength of wire rope, Crosby wire rope clips have an efficiency rating of 80% for 18” – 78” sizes, and 90% for sizes 1” through 3-12”. Entire Clip is Galvanized to resist corrosive and rusting action. Sizes 18” through 2-12” and 3” have forged bases. All Clips are individually bagged or tagged with proper application instructions and warning information. Clip sizes up through 1-12” have rolled threads. Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, these wire rope clips meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26. Look for the Red-U-Bolt®, your assurance of Genuine Crosby Clips.

View Complete Details

galvanized chain

  • CHAIN TRADE SIZE 1/8
  • MATERIAL DIAMATER .160

Meets ASTM & NACM standards An assortment of finishes available: Self Colored, Zinc Plated, Galvanized, Powder Coated, etc. Permanent identification on chain 100% proof tested Available in drums, pails, multiple style of assemblies Hot galvanized for marine applications to lessen wear and increase corrosion resistance. Grade 30 low carbon steel with proof coil links makes great utility chain for use on mooring setups and cargo lashing.

View Complete Details

High Performance Marine Cordage

  • Category Cordage / Rope

We offer Samson, a product that delivers unsurpassed quality in high-performance cordage for diverse applications. Lightweight, low stretch, and made to last.

View Complete Details

harnesses

  • Categories Featured, Fall Protection

Harnesses are built to completely fulfill our users extremely high demands for safety, comfort and functionality. Material and components as webbings, threads, paddings, buckles and D-rings has been extensively tested and carefully selected for optimal performance and durability. We stock and can supply several brand names.

View Complete Details

Lanyards

  • Category Fall Protection

Fall Safe® lanyards are available in a variety of materials from kernmantel rope, webbing to elasticated webbing. They come with or without an energy absorber and the connector’s configuration can be adjusted by the user for best performance.

View Complete Details

dock hardware

  • Category Galvanized Marine Hardware

Dock hardware from Virginia Fasteners. T plates Angle washer plates Outsideinside corner plates Pile guides Pile rollers Cleats

View Complete Details

Electric Hoists

  • Categories Featured, Hoists

Harrington’s (N)ER enhanced features three phase electric chain hoists are equipped with the latest technology in the market today. All models include a low headroom, lightweight body with a fan-cooled motor, standard thermal motor protection and a count hour meter for preventive maintenance. A secondary mechanical load brake is an additional features on ER models only. Simply the best hoists on the market! (N)ER capacities 18 Ton through 5 Ton (N)ER capacities 8 Ton through 20 Ton – see (N)ER large capacity section for details Smart Limit option is available on NER capacities 18 through 5 Ton 60 minute, H4 rated motor for the most demanding applications “The Guardian” Smart Brake Technology revolutionary DC current motor brake with electrical failsafe design and 10 year warranty Adjustable dual speed via under-the-cover variable frequency drive All standard models are UL listed to UL 1340 “Standard for Hoists” Completely sealed body suitable for harsh indoor or outdoor environments- IP55 rated Plug in pendant and power supply cords save time on set up and maintenance Super strength, nickel-plated load chain is corrosion and wear resistant 5 or 6 pocket load sheave improves chain life and promotes smooth lifting

View Complete Details

Hooks

  • Category Rigging Hardware

The Crosby Group has been manufacturing products such as hooks, swivels, shackles and blocks since 1956, setting the industry standard for quality.

View Complete Details

Plate Clamps

  • Categories Featured, Rigging Hardware

For vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp to lift from practically and direction and helps to avoid side-loading Welded alloy steel body for strength Forged alloy components where it matters most Individually proof-tested at 2 times the Working Load Limit with certification…serial number and test date stamped into body Full 180º turning range for material transfer, turning or moving Latch locks clamp either open or closed Repair kits available RFID equipped for complete, modern traceability

View Complete Details

sheaves

  • Category Rigging Hardware

We offer a finely designed range of McKissick Sheaves, which are known for their uniformity. These sheaves are designed to increase life of wire ropes, with which they are used in the industries. Best quality raw material is used to create McKissick Sheave range that performs excellently under the heavy duty industrial applications. Customized range of industrial elements is designed to meet requirements from multiple industries.

View Complete Details

Turnbuckles

  • Category Rigging Hardware
  • SERIES HG-223 Hook & Hook Turnbuckles

We carry Crosby’s full product listing of assemblies and components of turnbuckles and similar products. Turnbuckle assembly combinations include: HG-223 Hook & Hook Turnbuckles HG-225 Hook & Eye Turnbuckles HG-226 Eye & Eye Turnbuckles HG-227 Jaw & Eye Turnbuckles HG-228 Jaw & Jaw Turnbuckles

View Complete Details

Wire Rope Sling

  • Category Slings
  • temperatures 200° F

Conditions such as the following should be sufficient reason for consideration of sling replacement: For strand laid and single part slings, ten (10) randomly distributed broken wires in one rope lay, or five (5) broken wires in one strand in one rope lay. For cable laid and braided slings of less than 8 parts, twenty (20) randomly distributed broken wires in one lay or braid, or on (1) broken strand per sling. For braided slings of 8 parts or more, forty (40) randomly distributed broken wires in one braid, or two (2) broken strands per sling. Severe localized abrasion or scraping. Kinking, crushing, birdcaging or any other damage resulting in distortion of the wire rope structure. Evidence of heat damage or if a wire rope sling having a fiber core is exposed to temperatures in excess of 200° F. or if a wire rope sling having a steel core is used at temperatures above 400° F or below minus 60° F. End attachments that are cracked, deformed, or worn. Deformation—any visibly apparent bend or twist from the plane of the unbent hook. Throat opening—any distortion causing an increase in throat opening of 5% not to exceed imin. (6mm) (or as recommended by the manufacturer) Corrosion of the rope or end attachments. Unlaying or opening up of a tucked splice.

View Complete Details

wire rope cutter

  • Length 18” (457 mm)
  • Maximum Cable Cutting Capacity: 9/32” (7 mm) wire rope and cables

Klein Tools Wire Rope Cutter features shear type blades for square, clean cuts. Forged from USA steel. Non-slip vinyl grips provide a secure hold when the tool is in use. Hinge bolt with pin-set nut provides proper blade tension. Tool cuts wires up to 932″ (7mm)) and Stoffel container seals. Shear type blades for square, clean cuts. All forged construction; USA Steel. Non-slip vinyl grips. Hinge bolt with pin-set nut for proper blade tension. Cuts wire up to 932” (7 mm) and Stoffel® container seals.

View Complete Details

General Purpose Wire Rope

  • Category Wire Rope

High Quality six strand rope High Strength – confirmed by Bridon’s “Powercheck” testing of a sample Excellent resistance to wear. Fully Lubricated. Steel Core, Fibre Core.

View Complete Details

High Performance Wire Rope

  • SERIES Dyform 18

Rigorous checks during manufacture ensures Bridon only produces premium quality ropes. Breaking load tests on all our ropes gives ultimate assurance that specifications have been met or exceeded. High breaking force Rotation resistant Reduced sheave wear Long service life Reduced downtime

View Complete Details

Tell Us What are you looking for? Will call you back

Contact Us

  • Charleston, SC 29405, United States