Other Products / Services #4972932

The Sabina single box fan is available in a range of sizes from 125mm to 400mm diameter connection spigots and cover duties up to 0.66 cubic meters per second flow rate and 510 pascals pressure.

The Daisho twin box fan is available in a range of sizes from 125mm to 630mm diameter connection spigots and cover duties up to 3.5 cubic meters per second flow rate and 1250 pascals pressure. All units are fitted with high efficiency EC motors which run via a 230v single phase 50Hz feed, the motor drives a backward curved centrifugal impeller which is made from glass fibre reinforced plastic. The motors are controlled by Flakt Woods own iFan controller with integrated speed controller and most importantly an auto changeover switch. In the unlikely event of one of the fans failing, the auto changeover switch detects that a fan has failed and automatically switches on the second blower. The casing of the Twin box fan is made from folded pre-galvanized steel and is lined with acoustic medium. The unit is suitable for mounting in the horizontal orientation using the integrated mounting brackets, if vertical configuration is required please contact us.

A light weight and durable duct fan with very low noise levels, suitable for most low volume low to medium pressure ducted applications.Low noise levelsDurable light weight constructionQuick installation

Due to its size and motor power, Ropera fans are suitable for most low volume low to medium pressure ducted applications. These are typically found as boost fans within long duct runs and trickle extract fans due to the nature of them moving the air inline with the axis of the impeller. It has a light weight yet durable construction and are designed to fit directly into spiral ductwork for a quick installation. Due to the lower flow rates and pressure, tube fans have very low noise levels making them ideal for installation into ceiling voids. The EC version of the Ropera tube fan is only available with a steel casing but is available in the same range of circular connection spigot sizes, from 100mm up to 355mm diameter and covers a range of duties up to 0.56 cubic meters per second flow rate and 640 pascals. The units are fitted with high efficiency EC (electronically commutated) motors which are IP44 rated and suitable for 50Hz and 60Hz operation. The speed is infinitely variable via a 0-10v switch signal.

The Katana rectangular duct fan with backward curved centrifugal impeller is available in sizes from 400x200mm to 1000x500mm and cover duties up to 3.1 cubic meters per second flow rate and 920 pascals pressure, and can operate in temperatures up to 70C. All units are fitted with AC external rotor motors which run via a 230v single phase or 400v three phase feed, depending on unit size. The motor drives a backward curved centrifugal impeller which is made from aluminium. The casing is made from folded pre-galvanised sheet steel. All units have a swing out type casing.

The EC derivative of the Katana Plus is available in the same formats and sizes as the AC version - from 600x350mm to 1000x500mm and covers a range of duties up to 3.3 cubic meters per second flow rate and 900 pascals. The units are fitted with high efficiency EC motors which are IP54 rated and suitable for 230v single phase and 400v three phase, 50Hz and 60Hz operation. The speed is infinitely variable via a 0-10v switch signal.