Other Products / Services #6697905

slurry pump parts

1. Supplying the exchangeable pump parts with the warman series pumps

1) hap series pump volute liners, impellers, and suction liners under heat treatment

2) pump volute liners & impellers under machining work

deep groove ball bearing

deep groove ball bearing generally consists a pair of rings, a set of cages, a set of steel balls.

its simple structure and easy usability make itself as the most common and most widely used type of bearings. This kind of bearings is mainly used to bear radial load, moreover, it also could withstand a certain amount of axial load. When increasing the radial clearance of bearing, this kind of bearing has properties of angle contact ball bearing to bear a large axial load within a certain range.

after assembled on shaft, the deep groove ball bearing can make the axial displacement limit of the shaft or shell within the bearing's axial range. Meanwhile, when the shell hole and shaft are relatively tilted, the bearing could still work as normal, but the service life is reduced.

single stage double suction centrifugal pump

general description

our type xs series pumps are new type of single stage double suction centrifugal split pumps with high performance character. They are widely used in water plant, circulation water system of air conditioner, heat water circulation piping system, construction industry, drainage pumping station, power station, industrial water supply system, ship industry, mining industry and etc. Type xs pumps are advanced products developed from type sh. S. Sa. Sla. Sap series pumps.

pump outlet diameter dn: 80800mmcapacity q: 2211600m3/hhead h: 7200mmtemperature

t: -20c105c(xs)-60c200c(xs)solid parameter 80mg/lpermissible pressure 2.5mpa (xs)

kwp horizontal non-clogging centrifugal pump

the type of kwp pump is of single-stage centrifugal pump.

it is high efficiency, non-clogging and back pull-out design which can allow the rotor to be removed from the pump casing without disturbing the piping or dismantling the casing. In this way, it is not only simplifying maintenance but also allows fast change of the impellers and wear plate at suction side, thereby permitting the pump to be rapidly modified to suit different operating conditions.

the kwp is from 40mm to 500mm according to outlet diameter.type kwp pump normally is suitable for delivering the neutral media (ph value is from 6 to 8). For the application of corrosive fluid and other special requirements, we could adopt with different material for this pump.

application

the type of kwp pump can deliver all kinds of sewage, clear water, seawater, bittern water, waste water and sludge so that it can be used in water supply plant, sewage treatment works, breweries, mines as well as the chemicals and construction industries.

advantages

series of kwp non-clogging centrifugal pump is a new type high-efficiency, energy-saving non-clogging pump made by our workshops, under the license technology introduced from ksb company.

FGD Pump

Main Specifications

Size: 350mm-1000mm

Capacity: 1200-16000 m3/h

GP Gravel Pump

Main Specifications

Size: 4-16 inches

Capacity: 36-5040 m3/h

Head: 5-80m

Material: Hi-chromium alloy

CP-TL Ceramic Pump

Main Specifications

Size: 200mm-1000mm

Capacity: 500-18000 m3/hHead: 20-40m

Material: Ceramic

Pump Features

Series of CP TL desulfurization pump has its own unique character on the wear resistance, corrosion resistance than the metal lined pump, which makes its longer service life and wide range working applications. Also, the CP-TL pump has the obvious advantage in the energy saving, reducing maintenance, cost reducing

Full Armored Rubber Hose

This full armored rubber hose is mainly used for dredging projects and mine tailings transportation. This steel ring type armored tube could be working longer time when conveying solid with acute angles and also guarantee the pipe with a bent over at least 30 degree. The inner diameter range of the pipe could be 600 to 1000mm. The pipe and pipe are connected by flanges and the single pipe length and working pressure could be manufactured according to the users requirement.

QW & QWN Submersible Sewage Pump

Main Specifications

Size: 50mm-600mm

Capacity: 18-3750 m3/h

Head: 5-60mPower:1.5-270KW

Pump Features

1. QW-type Submersible Sewage Pump

QW pump has the advantages efficiency , not easy to enlace, no clogging, auto-coupling and auto-control. etc. It specializes in discharging of solid granule and long fiber garbage.

The pump is mainly used in urban construction industry hospital building hotel restaurant and so on. It is used to transport silt, urban sewage containing solid granule and long fiber.

The advantages of QW pump are its small volume, compact structure and high efficiency. Liquid level automatic control can be applied if the customer needs it and automatic protection device and control cabinet are fitted.