Post Your Requirement Menu

Welcome User

Other Products / Services

Our offered Product range includes General Purpose Tape Dispensers, Copper Conductive Tapes, RoHS Compliant, Clear ESD Tapes, RoHS Compliant, Conductive Grid Tapes, RoHS Compliant and Conformal Coating Discs, RoHS Compliant.

General Purpose Tape Dispensers

  • Part Number KTD1
  • Qty 1

General Purpose Tape Dispensers are are industrial grade portable dispensers to meet the needs of the customer. The wide range selection of tape dispensers includes manual hand-held and bench top dispensers.

View Complete Details

Copper Conductive Tapes, RoHS Compliant

  • Part Number CFT-1/4
  • Qty 1

Copper Conductive Tapes, also known as EMI Shielding Tapes, are ideal for building ground systems. They are made from copper foil with an acrylic conductive adhesive. These conductive tapes are supplied on a paper liner for easy handling and cutting. The Copper Conductive tapes provide a very low rate of electrical resistance. The film is 1.5 mil thick with 1.25 mil of adhesive. Temperature rating is 155ºF.

View Complete Details

Clear ESD Tapes, RoHS Compliant

  • Part Number ESDCT3C-1/2
  • Qty 1

Clear ESD Tapes also known as ESD Cellulose Tapes, are made of a 2 mil clear cellulose material with solvent based natural rubber adhesive. Temperature range is 32°-150°F. They have tensile strength of 24lbsinch. They meet specification CID-AA-113B, Type 1, Class A and ANSI ESD S20.20 standards. These tapes are available in 3" core and are 108 ft long.

View Complete Details

Conductive Grid Tapes, RoHS Compliant

  • Part Number WCGT-1/2
  • Qty 1

Conductive Grid Tapes are three layer tapes that have a conductive grid buried between two static dissipating co-polymer substrates. They provide an anti-static non-sparking surface on both the inside and the outside that will not shed, crack, chip or rub off. Available on 3" cores. These tapes meet or exceed requirements of ANSI ESD-S20.20 and ESDA Standard 1.1-2006.

View Complete Details

Conformal Coating Discs, RoHS Compliant

  • Part Number CCD-1/8
  • Qty 1

Conformal Coating Discs are made of 1 mil polyester film with 2 mil mustard colored rubber resin adhesive. Many components and printed circuit board locations must remain uncoated and the purpose of the conformal coating masking discs is to prevent migration of the conformal coatings into components. The Conformal Coating Discs offer the perfect solution to ensure areas for use as connector locations or insertion areas for interchangeable devices remain free of the protective coating. They offer high temperature resistance needed in the conformal coating process.. These discs are silicone free, therefore they do not leave any silicone shadow. They can withstand a temperature of up to 325ºF. The objective of conformal coating is to apply a protective layer to the printed circuit board and components to prevent degradation in electrical performance when subjected to environmental stresses encountered in specific operating conditions. Conformal coatings also protect both the printed circuit board and components from airborne or solvent borne contaminants.

View Complete Details

Blue Masking Tapes, RoHS Compliant

  • Part Number BPT-1/8
  • Qty 1

Blue Masking Tapes, also known as Anodizing Tapes, are made of 1 mil thick polyester film and 2 mil thick silicone adhesive. They can be removed cleanly without leaving an adhesive residue. Blue Masking Tapes can withstand temperatures of up to 400°F204°C. They are packaged in a 3" core and are 72 yards long.

View Complete Details

Green Masking Discs, RoHS Compliant

  • Part Number GPD-1/8
  • Qty 1

Green Masking Discs, also known as Powder Coating Masking Discs, are made of 2 mil thick polyester film with 1.5 mil thick silicone adhesive. They can withstand temperatures of up to 400°F204°C. They are extremely economical and can be removed cleanly without leaving any adhesive residue. Green Masking Discs are on a clear, slit back liner for easy removal. Temperature rating is 400°F204°C. They are packaged in a 3" core.

View Complete Details

Green Masking Tapes, RoHS Compliant

  • Part Number GPT-1/8
  • Qty 1

Green Masking Tapes, also known as Powder Coating Masking Tapes, are made of 2 mil thick polyester film with 1.5 mil thick silicone adhesive. They can withstand temperatures of up to 400°F(204°C). Green Masking Tapes are extremely economical and can be removed cleanly without leaving any adhesive residue. They are packaged in a 72 yard long roll with a 3" core.

View Complete Details

Low Static Kapton Tapes, RoHS Compliant

  • Part Number KPTLS-1/8
  • Qty 1

Low Static Kapton ® Tapes are made of DuPont™ Kapton ® Polyimide film. They are 1 mil thick backed by silicone adhesive with ESD additive to reduce the static charge. They can withstand temperatures of up to 500°F260°C. Silicone adhesive is 1.6mil thick and leaves no residue. Total thickness of this product is 2.6±5 mil. Color is amber and available in 36 yd rolls. Custom sizes are available upon request.

View Complete Details

5 Mil Kapton Tapes, RoHS Compliant

  • Part Number KPT5-1/8
  • Qty 1

5 Mil Kapton ® Tapes are made from Kapton ® Polyimide film with Silicone adhesive. They have been used in applications at temperatures as low as -269°C (-452°F) and as high as 260°C (500°F). DuPont™ Kapton® polyimide films have set the industry standard for over 45 years in high performance, reliability and durability, with a unique combination of electrical, thermal, chemical and mechanical properties that withstand extreme temperature, vibration and other demanding environments. Kapton® polyimide films make innovative design solutions possible in a range of industries including, consumer electronics, solar photovoltaic and wind energy, aerospace, automotive and industrial applications. 5 Mil Kapton® Tapes have a high tear strength and dielectric constant. Silicone adhesive protection leaves no residue.

View Complete Details

2 Mil Kapton Tapes, RoHS Compliant

  • Part Number KPT2-1/8
  • Qty 1

2 Mil Kapton ® Tapes are made from Kapton ® HN Polyimide film with Silicone adhesive. They have been used in applications at temperatures as low as -269°C (-452°F) and as high as 260°C (500°F). DuPont™ Kapton® polyimide films have set the industry standard for over 45 years in high performance, reliability and durability, with a unique combination of electrical, thermal, chemical and mechanical properties that withstand extreme temperature, vibration and other demanding environments. Kapton® polyimide films make innovative design solutions possible in a range of industries including, consumer electronics, solar photovoltaic and wind energy, aerospace, automotive and industrial applications. 2 mil Kapton® Tapes have a high tear strength. Silicone adhesive protection leaves no residue.

View Complete Details

1 Mil Kapton Tapes, RoHS Compliant

  • Part Number KPT-1/8
  • Qty 1

1 Mil Kapton ® Tapes are made from Kapton ® HN film with Silicone adhesive. They have been used in applications at temperatures as low as -269°C (-452°F) and as high as 260°C (500°F). DuPont™ Kapton® polyimide films have set the industry standard for over 45 years in high performance, reliability and durability, with a unique combination of electrical, thermal, chemical and mechanical properties that withstand extreme temperature, vibration and other demanding environments. Kapton® polyimide films make innovative design solutions possible in a range of industries including, consumer electronics, solar photovoltaic and wind energy, aerospace, automotive and industrial applications. Kapton® Tapes have a high dielectric strength. Silicon adhesive protection leaves no residue. Custom sizes are available upon request.

View Complete Details

Conformal Coating Tapes, RoHS Compliant

  • Part Number CCT-1/4
  • Qty 1

Conformal Coating Tapes are made of 1 mil polyester film with 2 mil mustard colored rubber resin adhesive. Many components and printed circuit board locations must remain uncoated and the purpose of the conformal coating masking tapes is to prevent migration of the conformal coatings into components. They offer high temperature resistance needed in the conformal coating process. These tapes are silicone free, therefore they do not leave any silicone shadow. They can withstand a temperature of up to 325ºF. The objective of conformal coating is to apply a protective layer to the printed circuit board and components to prevent degradation in electrical performance when subjected to environmental stresses encountered in specific operating conditions. Humidity is the most prevalent and also the most damaging environmental stress as it can drastically lower insulation resistance between conductors, accelerate high-voltage breakdown and corrode conductors. Conformal coatings also protect both the printed circuit board and components from airborne or solvent borne contaminants.

View Complete Details

Solder Wave Tapes, RoHS Compliant

  • Part Number SWT-1/4
  • Qty 1

Solder Wave Tapes, also known as Wave Solder Tapes, are ideal for use in solder wave masking and high temperature paint operations. These Solder Wave Tapes are also recognized as High Temperature Masking Tapes. They are made from crepe paper with rubber adhesive that can be removed cleanly without leaving any residue. They can withstand molten solder for 5-8 seconds at 500° F.

View Complete Details

Conductive Tapes, RoHS Compliant

  • Part Number WCGT-1/2
  • Qty 1

Conductive Tapes are three layer tapes that have a conductive grid buried between two static dissipating co-polymer substrates. They provide an anti-static non-sparking surface on both the inside and the outside that will not shed, crack, chip or rub off. Available on 3" cores. These tapes meet or exceed requirements of ANSI ESD-S20.20 and ESDA Standard 1.1-2006.

View Complete Details

High Temperature Masking Discs, RoHS Compliant

  • Part Number PPD-1/8
  • Qty 1

High Temperature Masking Discs are made of polyimide film with 1.5 mil of Silicone adhesive which does not leave any residue. They can withstand temperatures of up to 500°F(260°C). These masking discs have high dielectric strength and offer excellent performance in electrical and thermal insulation. Applications: Masking of circuit boards during wave soldering or other electronic manufacturing processes Powder coating Automotive and transformer manufacturing Custom sizes are available upon request

View Complete Details

Tell Us What are you looking for? Will call you back

Contact Us

  • Torrance, CA 90503 map, United States